Kembali ke atas

HONDA XE75(tahun 1978) Spesifikasi Dasar

Kapasitas Mesin 74cc
Horsepower Maksimum 6ps(4.0 kw)/8000rpm
Berat Total 79(Simulasi)kg
Tipe Mesin 空冷4ストOHC2バルブ単気筒
Torsi Maksimum 0.57kg・m(5.6N・m)/6000rpm
Kapasitas Tangki - Liter

HONDA XE75(tahun 1978) Pencarian Cepat Suku Cadang

Produk Baru HONDA XE75(tahun 1978)

Ulasan Produk HONDA XE75(tahun 1978)

14 year type PCX 125 (JF56) We used it when exchanging outside the company. I compared it with an OEM and it matched without any difference. 500? After running I checked whether there was exhaust leakage, but exhaust was not exhausted at all. OEM Product is slightly higher, so there was nothing wrong with this product that is excellent in COSPA.

I am using it for Rear, but since I do not start working unless I stepped on stronger, I feel pretty hard to use if I am accustomed to NORMAL.
Even if you step on it without fail, it does not work more reliably than OEM.

If you are afraid of rock, I think something is right, but when you are wearing High grip tire it is hard to be effective when it's time to recommend it.

Very good quality product. Much better than original brake shoes. Brakes works now perfectly. Highly recommended product.

The product came in a sealed box and excellent quality! Packaging is not damaged and the product too! I took it in reserve, so I did not install it on a motorcycle! I recommend this product and store to everyone! Successful shopping!

I used ordinary Iridium plugs before, but when I exchanged for this product this time I think that the startability of the Engine has improved.
Because of that, it took less time to turn Cell and the burden on Battery seems to be diminishing.

The shape of the tip is slightly different from OEM. I feel a sense of incompatibility when I put on Rubber cap.

Seal tape winds in the reverse direction, not in the tightening direction.

Noticing that Brake fluid seeped out of Caliper's Air breeder
Rust was amazing as I removed it. Indeed when I thought this was dangerous, I found this product
Replaced. As I wrote that the installation was to tighten Seal tape one half turn and tighten
I rolled Emon's Seal tape. It looks more modest to the ground.
If you think that you could buy safety cheaply in the long run as it will not rust.

By the way, by wrapping a Seal tape, it seems that it is possible to prevent the Brake fluid from bleeding out of the thread during the air removal work.
I wrote it as a reference, since I did not write to absolutely roll it, I thought whether it is not necessary to wind Tape.

Noticing that Brake fluid seeped out of Caliper's Air breeder
Rust was amazing as I removed it. Indeed when I thought this was dangerous, I found this product
Replaced. As I wrote that the installation was to tighten Seal tape one half turn and tighten
I rolled Emon's Seal tape. It looks more modest to the ground.
If you think that you could buy safety cheaply in the long run as it will not rust.

Selection of Plug was also a difficult place as we are familiar with various things such as 65ccBore up, NRMagicExhaust Chamber, High Speed ??Pulley etc.. I ran the second fastest from the OEM, but I could not correct the soothed feeling even if I adjust the air / fuel ratio to any extent. When I replaced it with this plug this time, it burned my best by chance.

HONDA XE75(tahun 1978) Top Brand

'