Kembali ke atas

selalu puas belanja di webike. barang original dan sesuai deskripsi. plug and play. cuma pengiriman agak lama saja

Famous first ○ ○ ○ I was thinking of the LED of House but in the case of MONKEY in installation, there were difficulties and I was looking for various items I went for this product.
There is a clear difference if compared with NORMAL.
☆ If the price is a bit lower ☆ 4

I used a Halogen sphere of MICHIBA, a Manufacturer who I do not know well, but since the low ball has run out, I replaced it for this product. When exchanging from NORMAL sphere to MICHIBA, it rarely felt the difference, but this product is good enough to think that Lens cut changed. First, the irradiation range of row is Quantity : Pair (for Left and Right) It gets wider, and the high lights far in the form of Spot. I am surprised to see whether the same Halogen is different up to here ....
However, because of high efficiency, life is a little worried.

Dual head of CBR 150R is dark. 18WX2 So there are some sides that can not be helped, but it is too dark as a motorcycle that can run on highways. So I tried putting the classic pine Stripe. It got pretty bright and I became able to run freely without anxiety.
Although it is dark compared to HID and LED which became the mainstream of four wheel vehicle, CBR 150R is AC power supply (FlywheelMagnet) Therefore, when it is tried to change to the HID and LED of the DC power supply, it has to be replaced from the power supply itself, and even if it is difficult to make it by hardship, the focus often does not suit well, "Too much labor and no success" Sometimes it becomes. Light of AC power supply is easy and reliable to replace with pines Stripe.
There are also people who want to make the number of Watt Large by thinking to make it bright, but it is meaningless rather than to Flywheel Magnet car with a limited amount of electricity generation, rather it gets dark, so it is good to keep Watt number as Standard.
When attaching Valve of PH 7 type, as to keep the convex part of the Gold tool properly in the concave part of Light. If you do not do this, the focus will come to strange places.
The disadvantage of the pine Stripe Motorcycle beam is that there is somewhat difficulty in product accuracy. I purchased it many times, but there were times when the position of the Filament was misaligned, and Glass itself was distorted. When buying at the shop front, it is good to check whether there is any distortion. In the case of mail order, when it arrives, let's check firmly before opening to see if the accuracy is accurate.

It is not so bright as I thought.
It is not very bright as the price goes.
I will use it for the time being, but it is the same feeling as OEM
It's fine because it's white.
I feel regrettable.

Since Low beam is cut every time, I bought the same product at the nearby 2 Rinkakan I was hurriedly hurriedly thinking that it was not a purchase but a preliminary purchase I purchased it because I am somewhat cheap so I am satisfied

Quotient ProductNo 116 B2C
PH712V25 / 25 W → 40 / 40W (Brightness of Class)

It gets brighter..
I never run out of bullets.
The price is cheap for Normal valve, but if it is this price difference you choose the brightness.
It gets brighter, but because the former is 25 W it can not be said that it is bright enough for night driving.

Clear bulb is the largest in light intensity, but White bulb may be good considering the sense of brightness and visibility.

It is a change from OEM, but I think that the brightness has nearly doubled.
There are multiple colors, you can choose your favorite thing.
However, I think that the price is a bit expensive.

It purchased in order to lessen power dissipation.It is brightness equivalent to a pure Valve in the Halogen of
18W.I think whether if there is little
power dissipation, it can turn to charge of the part Battery.

Brightness is felt quite bright although B-2 CLEAR is close to a tone NORMAL. It can operate in comfort also on the way of night without a streetlight.

The run of night became safe after changing into this product, although it was inconvenient to the run of night when it was the former fellow!

It is better as cheap, since it uses for a moped!
It is expected to durability.
Is it enough if it uses ordinarily?

It was used for exchange for the ball piece of a CUB.
Since it is a standard electric lamp, no problem is in a using feeling. Since it is an incandescent lamp, it is common in brightness, but since the price is cheap, it is satisfactory in Cost performance. I think that it will last long enough if it even warns against staining a metal part and the electric lamp surface with the oil of a hand in the case of attachment.

It changed from the NORMAL color and made it the White's tone. It was able to have sense of security in the run in
night. a pine with the abundant Variations of the
color -- although it is a Stripe, this color and the color of the Kelvin on
one more are recommended.
Although used for two years, a ball piece is not yet carried out. Quality is also good.

Although before was used as the Valve of B-2 CLEAR, this Valve and the pure lay quantity of light go up considerably, and are dramatically bright! It is like [ which was impressed ] when it changes to a Motorcycle beam from an authentic positive one for the first time. Since it is easy to have other vehicles noticed for a MAGNA50 with a small car body when a light is bright, a night journey is also safe. About durability, since he does not remember the before exchanged time, it has very well.
Although he wanted the Yellow Venus of subject in fact, since a certain article store was not out of stock, B-2 CLEAR was used with not having dealt with it by Mr. Webike this time also. When a Valve goes out next time, I would like to use a Yellow Venus.
Since it becomes brighter pure and leads also to safe driving, it is recommended.

'