Kembali ke atas

I made this Filter the same as last time in the third Oil exchange.
Filter wrench is not required, there is no new expense, even in terms of performance
Since I could use it without problems, I would like to repeat it in the future.

I thought that it could be cheap at with Magnet, purchased, nothing was Paint on the exterior It was good at Simple
Since the tightening Torque is stated in the OEM, I watched it and installed it, but the next time I need to look it up
MT07 was 15 Nm

Oil Filter is exchanged periodically, but performance is not problem at all.
Also, as long as it functions as a filter, Manufacturer thinks it is unnecessary to keep in mind.

When we arrived, it was already floating from release paper.
It seemed that the adhesive strength was not 0 and the season was still hot, so I tried adhering to Tank in the meantime and then it will float after a while.
As another means, by holding down from above for a long time, I hope that the shape of Pad itself will become familiar with Tank, I will keep curing Tape from above and keep it familiar 2 months.
I thought that it would have become familiar with it and seemed to be sticking somewhat when removing the curing tape.
But. It floated on the next day.
If you leave it like this, you will scratch the painting of Tank if you get in dust, so you only have to peel off.
It is mere Large loss.

How much iron powder etc on Magnet etc. I'm not sure whether it is adsorbed, but with Filter + Alpha this price has a sense of security and sense of security. We will continue to use it in the future.

Installed in zx-6 r in 16 years. I thought that Heat sink of heat dissipation will interfere, but since it did not hit Limit it was attached with no processing. It is bright, it looks pure white with a white color too!

I bought it because the replacement of the Oil filter is approaching.
Since I bought it at Sale time, I am superior in Cost performance.
Recently I have been using this product all the time, especially the bad place
There is none. I will use it next time as well.

To be truthfully written - - - -
I do not know in a short time whether it is good for Engine
I do not get well.
Evaluation is difficult as long as problems do not occur.

I can not keep it, accuracy is poor and I can not install it
There is nothing wrong with the problem.

Since it is like PB of Wei Big, I am not worried about the performance etc, and if I am concerned with Racer, I may be concerned about the performance side, but because I am a Cruiser and I will not go GunGun,. Price is satisfied with Large change, it is not a rotten one, so I would like to purchase Stock in the future.

It's nearly 10,000 kilometers so I do not really care about Filter performance.
Since it thinks that it is better to replace than not to exchange, replace every time.
It is convenient for Cartridge Type.

I recieve this item shipping to vietnam. Shipping very soon and no problem with the item. It's useful and beauty with my CBR1000rr Repsol

Although it is the best in terms of Cost, the lock spring fits the fins at the time of installation There is a phenomenon that the lock comes off The phenomenon is a bit uncertain We want to test running repeatedly. Brightness etc.. There is no problem.

Purchase to attach portable Holder and USB power supply to ZX-6R '13.
I fastened the Fuel Tank to the fixed Bolt and fastened it together. In the case of Bracket's Length and Mounting Position, in the case of ZX-6R it seems fitting that it is nothing more than this.
Actually holding a Holder or a power supply, I can not see it without looking a little downward, but on the contrary it did not disturb the Meter at all and it felt refreshing.

However, existing Bolt of Fuel Tank lacks Length to tighten Holder together. Bolt enclosed is also not suitable for Large, so you need a longer thing with Bolt diameter of Fuel Tank.

I think that no matter how big Manufacturer you choose there is no big difference in capability. I sold it under the name of webike, so I judged it would not be strange things.

Motorcycle is for Mission and Engine to share Oil. In this time Shift feeling is lightly raised and lowered, Magnet effect is out. It is always the second time in 3000 km, Filter exchange at the same time, scheduled for the third time and 900 km afterwards.
It is a product that feels good even that much. Although it was a Honda OEM school, I will try this product from now on.

'