Kembali ke atas

HELLO I'M SATISFIED OF THIS PRODUCT. SO I NOTICED AROUND 5000 RPM ,THE ENGINE SEEMS LIKE TO HAVE BLOWS. AS IS AN RACING PLUG YOU HAVE TO MAINTAIN A CERTAIN POWER FOR AVOIDING BLOWS.UP 5000 RPM YOU HAVE GOOD SENSATIONS.

Z125 PRO with Endurance Rear carrier, 30? Top Case (K-MAX) I'm attaching.
It was Exactly with this Size Cover.
Both Front and Rear have a hole through which Chain lock passes, which is useful..
Belt for flapping prevention comes with 1 pc.
I think that it is good to purchase additional Belt when it is worrisome to look at the situation.

Delivery was quick as expected. the build quality of the mirrors are excellent with premium grade aluminium. it is easy to set with lock washers for the radial stem. no vibrations during the ride and excellent vision when set properly.

It got lighter and the position of Brake lever was 3. Since it can be adjusted between 5 mm, you can bring the Brake lever to the desired position.

Also color is colorful and there are lots of luxurious colors, so it is a personal recommendation.

I bought it with Mirror exchange of the 2017 year Grom, but ...
I installed Style fun and cool.
The installation of the car body was installed snugly.
It is only the ground that you can adjust the angle of Mirror.
The angular width is small to turn it upwards, and I do not add it at all.
For two days I worried about various good ideas but abandoned it.
It will not be a shame.

Three months after installation, near the Grip end of Throttle was torn. To be sorry. Since it is not Pierced Type, I wonder if twist could not be absorbed..

The attached state is good, but Chatter is too much and I can not see anything Mirror if I try to drive. Unfortunately I gave it. It is a recommendation for those who place importance on the appearance.

На мой скутер подошёл идеально плюс работает блокировка заднего колеса. Доставка до московской области 10 дней.

I used SBS's For StreetPad for 1 year. Initial braking is loose for SBS made
I felt it worked just as much as I grasped, this was good with this, but I wanted some early braking
I was looking for a Pad of a different Manufacturer, I found a Pad made by PROJECT μ !!
4 wheels (AE86) At the pass and Circuit at running, "Project JECT μ HC" Although I was using it,
I liked the fee Ring and the cost performance at that time and I bought it.
Pad at the time of brand new is about 4 millimeters from the time of brand new for SBS made For Street used for about 1 year
It is about 1 mm thick.
Since it is currently being handbrapped, I feel that braking performance works just as much as I grasp, but compared with SBS made
Initial braking is already good. I think that there is a change in Fee Ring if Atari comes with it.
Also, in the case of two wheels, I can hardly see it, but the color of Pad Za Gold part is the same as 4 wheels "Emerald green"
I prefer. Braking performance - As for COSPA, it is expected from now.

very bad quality... the product seem like a china second hand mirror ... i will not install it on my bike...cant accept it

Заказывал вместе с ремнем ради интереса , что бы сравнить с тем , что продают у нас . Все один в один и штрих коды и упаковка. Ordered with a belt for the sake of interest, what would be compared to what they sell from us. All one-to-one and barcode codes and packaging. (Translated by Google translation)

To TW 225, although you purchased it, Brake fluid leaks many times. Any countermeasures. The paint of Master tank has come off The floor of the garage has become dirty.

Хорошо и плотненько наделись, рукой прикасаться приятно, выглядят стильно (для тех кто не любит пестрости а больше склоняется к строгим класическим цветам) Вообщем покупкой доволен, рекомендую! Google translate: Well and densely put on, hand to touch nice, look stylish (for those who do not like variegated and more inclined to strict classical colors) In general, the purchase is satisfied, I recommend!

the build quality of this NCY plug cap is awesome i can say of different league than other cap i owned like hcraft silicon, rcb and ktc indonesia plug caps.however its only drawback,and a major drawback actually, is i can't plug it in because its clearance is too much smaller than the spark plug thread side,you can see from the photo i attached that those plugs' thread are worn out/damage. then i manually thinkered with the inside to size up a bit. my effort worked out now i can use it perfectly.

Plus side : Price is cheap, around (grip) Soft, I think that it is good not to get stiff even in cold weather, individuals with many vibrations.

Minus surface : Grip becomes thick (About Grip heater included) So, for those who are Small in hands, depending on the angle of Handlebar, the thickness increases, Lever and Handlebar (Core of) There is a possibility that the thing may feel distant and it may be difficult to walk around so I think that the evaluation will break up.

Because my FUSION can not adjust the angle for Normal handle, I felt it slightly upward more than to Upright (Feeling holding down from above) became.
Because it is a Scooter which does not hold down even Positionally, the difference of several millimeters is sensuously pretty much Large.
Recommended for those who can adjust Handle position based on the thickness of Grip.

On the other hand, Direct feeling of Handlebar becomes thin, so I feel dull when I turn around.

'