YAMAHA GT50desktop_pages_mt_index.motor_name_h1

YAMAHA GT50

It was the last model of the GT series that was called by its nickname "Mini Tre". It adopted a square type swing arm monocross suspension from its MY80 model. The 80cc version could be ridden double.

Kapasitas Mesin 49cc
Horsepower Maksimum 5ps(4.0 kw)/8000rpm
Torsi Maksimum 0.47kg・m(4.6N・m)/7000rpm
Berat Total - kg
Kapasitas Tangki - Liter

125 Produk

Produk Rekomendasi

Ulasan Produk

I bought it with Mirror exchange of the 2017 year Grom, but ...
I installed Style fun and cool.
The installation of the car body was installed snugly.
It is only the ground that you can adjust the angle of Mirror.
The angular width is small to turn it upwards, and I do not add it at all.
For two days I worried about various good ideas but abandoned it.
It will not be a shame.

Feeling of use
As expected, it is sweeter than Bolt stoppage to Carrier, so if it is a box with a horizontal width, it will become more severe for the unbalance of luggage etc.
However, it is fixed more firmly than expected, and there is little wobble.
I am wearing a box named B 47 of GIVI, but I think that the box width up to about 30 L is about 40 cm, so I feel that the feeling of use does not change from the one fixed to the carrier.

About mounting
As this product is once taken BALI, I think that Seat will not be scratched immediately, but if it fixes, the Gold genus part will be strongly pressed against Seat, so long term use and heavy luggage etc If you post it probably Seat will be torn.
Also, since the width of the item is narrow, Belt for fixing also goes to Cowl
To be strongly pressed, Belt's rubbing measures are also necessary.

For the wounds of Seat I will fold the micro fiber toowel for washing for Vehicle for the time being.
We have not taken countermeasures concerning Belt's rubbing, but we plan to paste a scratch prevention Seat on the Cowl side.

Attached to Yamahabolt.
I was impressed to install.
In addition to the wide visible range, the car's light is not dazzling! \ \ (°∀°) / /
I do not know if it's because it's heavy, but the fact that Mirror is blurred and vibration can not be checked backward has diminished.
This was the best shopping in me.

The LeftMirror's angle adjuster was staggering when I left the box.
At that time, I was wondering if it was not tightened but it was soft and strange in the lightly tightened place, but when I tried to remove it, the Screw mountain was completely crushed.
It was annoying that the result of being kept waiting for about half a month was listening to about one week

OEMMirror of Z1000 is mirror surface (Frame immovable) Exchange only because it can not move. Since the 180 degree mirror surface rotates without using a tool as in the description of item, it is convenient to narrow the car width when putting in a garage.
Blue lens also reduces the light reflection and is very easy to see, but the visibility which is likely to be in Mirror which emphasizes Style is somewhat inferior.
Material is Aluminum and its surface is finished with Black Anodized so it is difficult to aged deteriorate and I think that it can be used for a long time.
I chose Exclusive this time but Stainless of MirrorCenter part glows and Parenthesis is nice.

I knew the numerical Large, but Small.
Back Mirror is important for backward validation.
I doubt the Concept that I made good with this Large Kimono.
And high price.
Right as Original, Left as the product and comparing actual runs.
I was looking for a square one because it is hard to see the PCX 150's Hen Lever shape.
If this is Large, Original is better..
There is no Cover in the mounting part, Bolt - Nut will become raindrops.

Those that arrived at hand are bad quality defective products only.
Joint part of Bracket and Mirror immediately became a graffa as shown in Photo 1.
When attached to the Motorcycle and adjusting the angle, suddenly falling down, afterwards, it is still lying downwards with a grazing.
Mirror of the combination of Mirror's Ball joint part is rude and hard and it does not move as shown in Photo 2 and a combination of what is loose and turns down quickly arrived.
In this state backward visibility etc etc are alive.

For Webike we also recommend removing from the product lineup from the point of trust issues.

As a matter of fact I guess I will purchase a bit of Parts in the future, but with the feeling now, high-priced products are a bit... I feel like.

Please pay attention to mt 07 Owner's person. Even if you adjust the Right Side, it only shows the ground. I also tried the adjustment with the root Bracket itself, but the master cylinder corresponds to Handlebar.
The upper and lower adjustment range is narrow.
Manufacturer's website MODEL vehicle was 07 so I trusted it.
Sorry it is a non-refundable item.