Kembali ke atas

Although the bolt of normal was a plus screw, in adjusting a weight roller etc. frequently, the screw tended to be licked immediately.
After exchanging for this bolt set, the electric torque driver could be equipped with a long 5-mm hexagon, the case could be removed immediately, and setting also became very easy.
Moreover, plating is playing a role also in texture.
Those who make desorption of a pulley case frequent also think that they are the optimal goods also for the direction to dress up.
It is recommended!

The attached state is good, but Chatter is too much and I can not see anything Mirror if I try to drive. Unfortunately I gave it. It is a recommendation for those who place importance on the appearance.

Great for replacing the stock Phillips screws which tend to burr easily. Fits my cv50 jog perfectly. Easy to use and is a great replacement. Would highly recommend.

Хорошо и плотненько наделись, рукой прикасаться приятно, выглядят стильно (для тех кто не любит пестрости а больше склоняется к строгим класическим цветам) Вообщем покупкой доволен, рекомендую! Google translate: Well and densely put on, hand to touch nice, look stylish (for those who do not like variegated and more inclined to strict classical colors) In general, the purchase is satisfied, I recommend!

Very beautiful Blue light, suitable for car Precision measurement There is an oil screen. Speed ​​to 120 km / h Make it know the speed of the car.

VINO SA10Jfor Front
Despite ordering by looking at the conformance chart, Small one by one.
What is the conformance table for what ??

Still if you install it, Brake is not working at all with a skusca.
I returned to OEM with haste.
It is troublesome twice.

Image is Right Side is Master cylinderLever of Nisshin so it is 10 mm from 8 mm OEM.

The diameter of Mirror is also Large Tiny, Small is not too much Simple, I think that Pipe stay part is Black as well and I think that it is becoming KSR in a tight atmosphere.
Outer part and Inner (Mirror part) And I think that visibility is good because the adjustment range is wide because three parts of Bracket root, Mirror side root, Mirror and Outer part can move.. Outer and Inner (Silver Partial) There is no problem because the movable amount of Large is not so big, but other moves.
When running, there is a shake in my KSR. If we attach Weight on the inner side of the Bar End etc., the blurring may be solved a bit. It's not just feeling too cruel.

If you do not change Clutch or Brake lever, you need to change to 8 mm Type, change to 10 mm Type if you change.
↓10mm↓
https : / / www. webike. net / sd / 20365709 /

I think that the atmosphere can be confirmed because Right Side of the image is Mirror of Madmax and Left Side is OEM.
Both of the last one are from Madmax.
I am satisfied because Simple is cool and the price is cheap.

Awesome product by daytona. Makes things a lot easier when tuning your scooter's transmission! Higher note, the thread doesn't break up easily because its an allen hex. Not like the original philips head. Highly recommend!

The shape and the quality are wonderful.
The price is cheap, but the shipping fee is higher.
It is around 400, but the shipping fee is 610 yen.

It is considerable braking power. For everyday Drive Front's disc brake may not be needed Level.

It will be 1500 km from the installation soon, but recently it came to sing at the time of Brake. Whether to deal with Grease or not...

I used it for Bore up of Zr. I think that it is a part that anyone can exchange if I carefully read the Instruction Manual. What I can say is that it is better to run separating + mixing after break-in. Even if the burning color of Plug is best, it will burn out if the amount of Oil is not enough.

I bought 60272 of DAYTONA which was rated good this time because I used Brake to raise the price of a certain one but it is ineffective from the beginning.
Since it was not easy until now, it may not be comparable, but Touch is also very good and it works well.
It is very easy to handle and relieve with feeling like braking while preventing sticking while sticking rather than working with guts.
This product is also very nice and good COSPA.

I thought it was not enough power I thought.

If I experience this kit from 50cc NORMAL, I think that I felt a considerable sense of power, but in my case... NRMagic56. Since it is a recombination from 9cc Bore Up Kit, I felt a little Torque up even though it was 71 cc.
Naturally, the maximum speed is almost unchanged.
Again, I thought that this Bore Up Kit of DAYTONA is a Kit for public roads that emphasized durability.
Port etc. I think that durability is enough if we do not process. Normal cab - Because it is made according to Normal muffler.....

Approximately 5 months after installing on ADDRESS V 125 G. The Right Side's Grip is on the Throttle side, but there is no change in the surface. And, looking at Left Side, the influence being gripping firmly at Breaking, or fine tsububb of the surface of the Grip was worn out due to friction with Gloves, and it became slippery.
It was easy to buy, but on a price basis, I was surprised that only Right Side wears so quickly. It is easy for subtle opening and closing of Throttle, and this point is disappointing, so I change it to three stars. For Racing so it may be useless ....

I flew away while driving, so if I was looking for anything good Mirror I bought the price of 500 yen with decisive factor!

With prices of other companies thousands of yen, because it is an exceptional price, if not expected at all, OEM Product. It is making!
It is 70 km vibration and the rear can not be seen because the OEM does not change anywhere outside, so we will exclude points subject to penalty points!

Previously, wrongly Opposite Thread ScrewSpec. The same shape Mirror made by D Tonna who ordered and can not be used (24 yen higher) Compared to the comparison, the make and shape are almost unchanged, the difference is that D tonna only comes with Fixing ScrewCover!

'