HONDA CR125

  • 28/10/2016

  •  446 views

L 0101cr125r 200412 - HONDA CR125

Model Name:CR125

Manufacturer:HONDA

Model Year:2003

It was the motorcycle for race use that had been playing an active role in motocross championships all over the world. Its MY2005 model had its engine completely renewed. Its cylinder port shape, reed valve, the operation method of the exhaust device, the cooling system, shift system, or its exhaust chamber were revised. In addition, the output characteristics and its throttle response had been improved. A high rigid aluminum die-casting material was used for the rear wheel hub and an aluminum extruded material was used for the chain guide plate to reduce its unspringing weight. It improved its road surface follow-up property as well.

Specifications:

[Basic spec]

Manufacturer HONDA Engine Type Water-Cooled 2 Stroke Crankcase Reed Valve Single Cylinder
Model Name CR125 Starter Kick Starter
Grade – Maximum Output (ps) 41.5ps(30.5kw)/11500rpm
Drive Train – Maximum Torque (kgf/m) 2.85kg-m(27.9N-m)/11000rpm
Model Type JE01 Curb Weight 97 (Approximate Value)
Displacement 124 Dry Weight 87.5
Sales Launch Year 2003/10 Fuel Efficiency by Catalog –
Height/Width/Length 1280/-/2157 Fuel Tank Capacity 7.7
Seat Height 954 Distance to Empty –
Front Tire Indication 80/100-21 51M Fuel Supply Carburetor
Rear Tire Indication 100/90-19 57M

[Service data]

Standard Plug – Chain Size 520
Number of Used Plugs – Chain Link Number 116
Engine Oil Amount – Battery Code –
Engine Oil (Refill) – Headlight –
Engine Oil (Element Replacement) – Headlight Type –
Front Blinker Rating – Headlight Remarks –
Drive Sprocket Teeth Number 13 Tail Light Rating –
Driven Sprocket Teeth Number 52 Rear Blinker Rating –

[Machine detail]

Motor Model Code JE01E Caster Angle 25.7 Degrees
Bore (mm) 54 Trail (mm) 100
Storke (mm) 54.5 Minimum Ground Clearance –
Compression Ratio 9.1 Distance Between Axes –
Ignition Method C.D.I. Ignition Streering Angle (Right) –
Engine Lubrication Type – Turning Angle (Left) –
Frame Type Diamond/Backbone Frame/Twin Spar Mirror Screw Hole Diameter 10mm
Minimum Rotaion Radius – Fuel Tank Reserve Capacity –

[Underbody detail]

Front Brake Type Single Disc Suspension Type (Rear) Swing Arm (Pro-link) Axle Travel 325mm
Front Brake Remarks – Number of Rear Shock Absorbers –
Rear Brake Type Disc Rear Suspension Stroke –
Rear Brake Remarks – Rear Wheel Travel –
Suspension Type (Front) Telescopic (Inverted Suspension) Cushion Stroke 305mm ABS –
Front Fork Type – Drive Train Chain
Front Suspension Stroke – Differential Oil Amount –
Front Fork Diameter – Chain Remarks –

[Equipment]

Seat Lowering Allowance – Theft Prevention Device Available
Mirror Screw Hole Diameter 10mm Tail Light Bulb Type –
Mirror Remarks – Tail Light Base Shape –
Electronic Device Remarks – Tail Light Base Shape 2 –
Fuel Gauge Available Tail Light Remarks –
Clock – Front Blinker Bulb Type –
Hazard – Front Blinker Base Shape –

[Engine detail]

Clutch Type Wet Type Tappet Clearance (mm) EX –
Transmission Normal Shift Idling Initial Value (rpm) –
Number of Gears 5 Needle Steps (Clip Location) –
Gear Ratio 2.308 / 1.867 / 1.529 / 1.294 / 1.130 Float Level (mm) –
Primary Reduction Ratio 3.15 Air Screw Return –
Secondary Reduction Ratio 4 Main Jet Type –
Variable Speed Vehicle Gear Ratio – Main Jet Number –
Tappet Clearance (mm) IN –

[Other spec]

Clutch Cable Length – Rear Brake Cable Length –
Choke Cable Length – Other Cables –
Meter Cable Length – Engine Number (Production Launch) –
Throttle Cable Length – Engine Number (Production End) –
Front Brake Cable Length –

[See Moto Index of HONDA]
[See Accessories for HONDA CR125]

Related post

Return Top