Model Name:NSR250R
Manufacturer:HONDA
Model Year:1986
It was developed at the same time as the commercially sold racer model, RS250. The NS cylinders that were placed in V-shape at 90 degrees had RC valves. It was so popular that the mountain roads used to be full of this NSR.
Specifications:
[Basic spec]
Manufacturer | HONDA | Engine Type | Water-Cooled 2 Cycle Crankcase Reed Valve 90-degrees V-Shaped 2 Cylinder |
---|---|---|---|
Model Name | NSR250R | Starter | Kick Starter |
Grade | – | Maximum Output (ps) | 45ps(33kw)/9500rpm |
Drive Train | – | Maximum Torque (kgf/m) | 3.6kg-m(35.3N-m)/8500rpm |
Model Type | MC16 | Curb Weight | 141 |
Displacement | 249 | Dry Weight | 125 |
Sales Launch Year | 1986/0 | Fuel Efficiency by Catalog | 41.0km/L (at 50km/h) |
Height/Width/Length | 1105/135/2035 | Fuel Tank Capacity | 16 |
Seat Height | 750 | Distance to Empty | – |
Front Tire Indication | 100/80-17 52H TL | Fuel Supply | Carburetor |
Rear Tire Indication | 130/70-18 63H TL |
[Service data]
Standard Plug | B9ECS | Chain Size | 520 |
---|---|---|---|
Number of Used Plugs | 2 | Chain Link Number | 108 |
Engine Oil Amount | – | Battery Code | FT4L-BS |
Engine Oil (Refill) | 0.7L | Headlight | 12V 60w/55w |
Engine Oil (Element Replacement) | – | Headlight Type | H4 |
Front Blinker Rating | 12V 15w | Headlight Remarks | – |
Drive Sprocket Teeth Number | 15 | Tail Light Rating | 12V 18w/5w |
Driven Sprocket Teeth Number | 42 | Rear Blinker Rating | 12V 15w |
[Machine detail]
Motor Model Code | MC16E | Caster Angle | – |
---|---|---|---|
Bore (mm) | 54 | Trail (mm) | – |
Storke (mm) | 54.5 | Minimum Ground Clearance | 135 |
Compression Ratio | 6.2 | Distance Between Axes | 1360 |
Ignition Method | – | Streering Angle (Right) | – |
Engine Lubrication Type | Separate Lubrication Type (with Splash and Force-Feed) | Turning Angle (Left) | – |
Frame Type | Diamond (Aluminum Twin Tube) | Mirror Screw Hole Diameter | – |
Minimum Rotaion Radius | – | Fuel Tank Reserve Capacity | – |
[Underbody detail]
Front Brake Type | Hydraulic Double Disc | Suspension Type (Rear) | Swing Arm (Pro-link) |
---|---|---|---|
Front Brake Remarks | – | Number of Rear Shock Absorbers | 1 |
Rear Brake Type | Hydraulic Disc | Rear Suspension Stroke | – |
Rear Brake Remarks | – | Rear Wheel Travel | – |
Suspension Type (Front) | Telescopic | ABS | – |
Front Fork Type | Upright Fork | Drive Train | Chain |
Front Suspension Stroke | – | Differential Oil Amount | – |
Front Fork Diameter | – | Chain Remarks | – |
[Equipment]
Seat Lowering Allowance | – | Theft Prevention Device | – |
---|---|---|---|
Mirror Screw Hole Diameter | – | Tail Light Bulb Type | S25 |
Mirror Remarks | Cowl Mirror | Tail Light Base Shape | BAY15D |
Electronic Device Remarks | – | Tail Light Base Shape 2 | – |
Fuel Gauge | Available | Tail Light Remarks | Glass Shape G18 Also Installable |
Clock | Available | Front Blinker Bulb Type | G18 |
Hazard | – | Front Blinker Base Shape | BA15S/BA15S |
[Engine detail]
Clutch Type | Wet Multiple Plate Coil Spring | Tappet Clearance (mm) EX | – |
---|---|---|---|
Transmission | Permanently Engaged 6-Stage Normal Shift | Idling Initial Value (rpm) | – |
Number of Gears | 6 | Needle Steps (Clip Location) | – |
Gear Ratio | – | Float Level (mm) | – |
Primary Reduction Ratio | – | Air Screw Return | – |
Secondary Reduction Ratio | 2.8 | Main Jet Type | KEIHIN Round Large (E) |
Variable Speed Vehicle Gear Ratio | – | Main Jet Number | #110+#115 |
Tappet Clearance (mm) IN | – |
[Other spec]
Clutch Cable Length | – | Rear Brake Cable Length | – |
---|---|---|---|
Choke Cable Length | – | Other Cables | – |
Meter Cable Length | – | Engine Number (Production Launch) | – |
Throttle Cable Length | – | Engine Number (Production End) | – |
Front Brake Cable Length | – |
[See Moto Index of HONDA]
[See Accessories for HONDA NSR250R]
Modifikasi Monkey 125 Inilah Honda Monkey custom oleh user komunitas Webike bernama Kohanbito. Knalpotnya memakai…
Kerja keras tanpa kenal lelah membuat KM99 makin bersemangat jelang ronda balap FIM Endurance World…
Honda CBR650R ini dimodifikasi menggunakan knalpot full system TERMIGNONI dengan silencer titanium yang biasa digunakan…
Jadwal untuk 8 Hours of Spa Motos, ronde FIM Endurance World Championship di Belgia, telah…
Eliminator Custom di Booth Daytona Daytona membuka booth di Osaka Motorcycle Show dan menampilkan Kawasaki…
Berikut ini adalah posisi klasemen sementara usai balapan pembuka FIM Endurance World Championship 2024 yang…