Model Name:SUPER HAWK III CB400D
Manufacturer:HONDA
Model Year:1980
While its competitors, like Kawasaki FX, had switched over to the 4-cylinder, Honda held on to the 2-cylinder OHC 3-valve. They confronted its rivals by upgrading its suspension parts, such as its multi-hole triple disc or the semi air suspension.
Specifications:
[Basic spec]
| Manufacturer | HONDA | Engine Type | Air-Cooled 4 Stroke OHC 3-Valve Parallel 2 Cylinder |
|---|---|---|---|
| Model Name | SUPER HAWK III CB400D | Starter | – |
| Grade | – | Maximum Output (ps) | 40ps(29kw)/9500rpm |
| Drive Train | – | Maximum Torque (kgf/m) | 3.2kg-m(31.4N-m)/8000rpm |
| Model Type | NC04 | Curb Weight | 187 |
| Displacement | 395 | Dry Weight | 187 |
| Sales Launch Year | 1980/0 | Fuel Efficiency by Catalog | – |
| Height/Width/Length | 1090/-/2115 | Fuel Tank Capacity | – |
| Seat Height | – | Distance to Empty | – |
| Front Tire Indication | 3.60-19 4PR TL | Fuel Supply | Carburetor |
| Rear Tire Indication | 4.10-18 S 4PR TL |
[Service data]
| Standard Plug | D8EA | Chain Size | 530 |
|---|---|---|---|
| Number of Used Plugs | 2 | Chain Link Number | 110 |
| Engine Oil Amount | – | Battery Code | FB12A-A |
| Engine Oil (Refill) | 2.0L | Headlight | – |
| Engine Oil (Element Replacement) | – | Headlight Type | – |
| Front Blinker Rating | – | Headlight Remarks | – |
| Drive Sprocket Teeth Number | – | Tail Light Rating | – |
| Driven Sprocket Teeth Number | – | Rear Blinker Rating | – |
[Machine detail]
| Motor Model Code | CB400NE | Caster Angle | – |
|---|---|---|---|
| Bore (mm) | – | Trail (mm) | – |
| Storke (mm) | – | Minimum Ground Clearance | – |
| Compression Ratio | – | Distance Between Axes | – |
| Ignition Method | – | Streering Angle (Right) | – |
| Engine Lubrication Type | – | Turning Angle (Left) | – |
| Frame Type | – | Mirror Screw Hole Diameter | 10mm |
| Minimum Rotaion Radius | – | Fuel Tank Reserve Capacity | – |
[Underbody detail]
| Front Brake Type | Double Disc | Suspension Type (Rear) | – |
|---|---|---|---|
| Front Brake Remarks | – | Number of Rear Shock Absorbers | – |
| Rear Brake Type | Disc | Rear Suspension Stroke | – |
| Rear Brake Remarks | – | Rear Wheel Travel | – |
| Suspension Type (Front) | – | ABS | – |
| Front Fork Type | – | Drive Train | Chain |
| Front Suspension Stroke | – | Differential Oil Amount | – |
| Front Fork Diameter | – | Chain Remarks | – |
[Equipment]
| Seat Lowering Allowance | – | Theft Prevention Device | – |
|---|---|---|---|
| Mirror Screw Hole Diameter | 10mm | Tail Light Bulb Type | – |
| Mirror Remarks | Use screw type mirror or reverse screw adapter. | Tail Light Base Shape | – |
| Electronic Device Remarks | – | Tail Light Base Shape 2 | – |
| Fuel Gauge | – | Tail Light Remarks | – |
| Clock | – | Front Blinker Bulb Type | – |
| Hazard | – | Front Blinker Base Shape | – |
[Engine detail]
| Clutch Type | – | Tappet Clearance (mm) EX | – |
|---|---|---|---|
| Transmission | – | Idling Initial Value (rpm) | – |
| Number of Gears | – | Needle Steps (Clip Location) | – |
| Gear Ratio | – | Float Level (mm) | – |
| Primary Reduction Ratio | – | Air Screw Return | – |
| Secondary Reduction Ratio | – | Main Jet Type | KEIHIN Round Large (E) |
| Variable Speed Vehicle Gear Ratio | – | Main Jet Number | #78 |
| Tappet Clearance (mm) IN | – |
[Other spec]
| Clutch Cable Length | – | Rear Brake Cable Length | 640 |
|---|---|---|---|
| Choke Cable Length | – | Other Cables | From Master to Joint: 450/Direct (R)980/(L)1030 |
| Meter Cable Length | – | Engine Number (Production Launch) | – |
| Throttle Cable Length | 560/570 | Engine Number (Production End) | – |
| Front Brake Cable Length | From Master to Joint: 450/Direct (R)980/(L)1030 |
[See Moto Index of HONDA]
[See Accessories for HONDA CB400 SUPERHAWKIII]