- Beranda
- Motor
- HONDA 51 - 125cc
- MSX125 (GROM)
- Sparepart Motor
- Suspensi / Rearset / Velg / Swingarm
- Set Swingarm
- G-Craft
- G-Craft: Plat Multifungsi GROM
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Bahan: A2017 (duralumin)
Warna: Black anodized finish
Spesifikasi: 6mm lubang x 4 titik
Material: A2017 material (duralumin)
Color: Black anodized finish
Specifications: 6mm hole x 4 places
[Deskripsi]
Itu dilas dengan "pipa persegi tiga" yang telah ditekuk oleh pengrajin terampil.
Peredam hub dilengkapi sebagai STD.
Dengan mengadopsi mekanisme yang sama dengan big bike, sangat mengurangi beban misi dan sebagainya.
Bagian sproket menggunakan bantalan berdiameter besar yang lebih rigid dibanding untuk MONKEY dengan menggunakan NSR.
Bagian penarik rantai mengadopsi tipe eksentrik, dan penyetelan rantai dimungkinkan dengan satu kunci pas.
Ukuran roda belakang adalah 4,0 J. (ukuran ban yang disarankan 130-70-12) untuk menghasilkan lingkar belakang yang kuat.
Spacer roda dirancang khusus untuk pemotongan tiga dimensi dari bahan aluminium padat.
Mur pengunci roda adalah tipe kunci tengah (Termasuk mur kunci eksklusif).
Bagian yang pas dengan poros adalah pemrosesan spline gerigi yang sangat kaku.
Ini adalah mekanisme andal yang telah diadopsi di lengan pro OEM.
Dengan mengadopsi mekanisme yang sama seperti motor besar, peredam hub sangat mengurangi beban misi.
Dilengkapi dengan bantalan bagian poros, peredam hub STD. Triple square pipes are hand-bent and welded together by skilled craftsmen.
Hub dampers are standard equipment.
By using the same mechanism as the big bikes, the load on the transmission is greatly reduced.
The sprocket part is for NSR, and the large diameter bearing which is more rigid than the one for Monkey is used.
The chain puller is an eccentric type, and the chain can be adjusted with a single wrench.
The rear wheel size is 4.0J (recommended tire size 130-70-12) to produce a powerful rear area.
The wheel spacers are specially designed by three-dimensional machining from solid aluminum material.
The lock nut of the wheel is a center lock type (special lock nut is included).
The mating part with the shaft is made of highly rigid serration spline.
This is a highly reliable mechanism which is also used on the stock Pro Arm.
The hub damper uses the same mechanism as on big bikes to greatly reduce the load on the transmission and other components.
Pivot bearing, hub damper as standard equipment.
Catatan
G-Craft Aluminum Swingarm for GROM (both sides) is HERE
Peringatan
*Foto produk hanya untuk referensi. Foto mungkin memuat warna dan tipe lainnya. *Installation image is for reference only.
*Image 5 is an image of the caliper (Crab Brembo) that can be installed.
*image 6 is an image of the rear axle area.
*The wheels are specially designed for this product (12-4.0J)
*Rear shocks for GROM can be used.
*Swingarm length is equivalent to +6cm long
*Disc rotors are Φ190.(For NS-1 rear)
*Rear sprocket is for 29-32.(Otherwise it will interfere with the main unit)
*Nitron rear suspension mini shocks cannot be used with the MINI R3 series because the dials interfere with the sway bars.
*Yoshimura exhausts cannot be installed due to interference with the stubby.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/