Kembali ke atas

【MORIWAKI】Full Exhaust System MONSTER

    • Penilaian:

Since it exchanged after new car purchase and in the shake down, the efficient difference from a normal muffler is not understood, but sound turns into a good sound.
A heavy low sounds most [ rotations / about 4000 ] from near idling, and it will beco

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-10-10 00:54:08
Since it exchanged after new car purchase and in the shake down, the efficient difference from a normal muffler is not understood, but sound turns into a good sound.
A heavy low sounds most [ rotations / about 4000 ] from near idling, and it will become quiet if rotation is raised more.
although the comparison with a normal muffler cannot be performed -- this muffler -- about 7000 rotations -- from -- a breath -- surroundings measure.
The pipe of No. 3 and No. 4 interfered after clearing work, and it deleted the entrance-side [ of a No. 4 pipe ], and set side of a No. 3 pipe with sander.
It seemed that the sag of a pipe, the angle of the cutting plane of a pipe, etc. did not suit delicately.
the more general one is such although there is no telling whether this neighborhood is the individual specificity of vehicles and whether it is the individual specificity of a product -- I think that it is hard for processing it.
Although processing was troublesome, I think that monster Black suits a zephyr well, and I exchange and think that it was good.

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

J

Full Exhaust System MONSTER

4 oleh Japan User(translated)

Pabrikan: MORIWAKI

Since it exchanged after new car purchase and in the shake down, the efficient difference from a normal muffler is not understoo...

Since it exchanged after new car purchase and in the shake down, the efficient difference from a normal muffler is not understood, but sound turns into a good sound.
A heavy low sounds most [ rotations / about 4000 ] from near idling, and it will become quiet if rotation is raised more.
although the comparison with a normal muffler cannot be performed -- this muffler -- about 7000 rotations -- from -- a breath -- surroundings measure.
The pipe of No. 3 and No. 4 interfered after clearing work, and it deleted the entrance-side [ of a No. 4 pipe ], and set side of a No. 3 pipe with sander.
It seemed that the sag of a pipe, the angle of the cutting plane of a pipe, etc. did not suit delicately.
the more general one is such although there is no telling whether this neighborhood is the individual specificity of vehicles and whether it is the individual specificity of a product -- I think that it is hard for processing it.
Although processing was troublesome, I think that monster Black suits a zephyr well, and I exchange and think that it was good.

J

Full Exhaust System MONSTER

4 oleh Japan User(translated)

Pabrikan: MORIWAKI

Unlike titanium, there were worries about rust, but it thought that contrast of Black and silver was beautiful, and chose here. ...

Unlike titanium, there were worries about rust, but it thought that contrast of Black and silver was beautiful, and chose here.
When not riding over a long period of time, probably because it has applied Super CRC fully, for the moment, rust has not come out.
When a used article etc. are seen, the thing out of which rust tends to come seems to be the curvilinear circles side by the side of a set portion and an engine.
Probably, it is good to be careful around here and to carry out maintenance.
Carburetors are OK with normal.
There is no place which said that especially the bottom became thin (it seems that there is also no place which becomes thick conversely).
The first effect should become light.
Management is dramatically easy.
The point that 2 and the exhaust pipe straight-line part of No. 3 are long in design is slightly dissatisfied.
Moreover, since ground clearance becomes low, at the time of level difference passage, cautions are required.
The motorcycle lift (jack) of form which incidentally receives a frame by stay was able to be used without interfering just before.
Although oil element exchange is impossible with wearing, it is OK even if it will not remove a muffler, if it sets to an engine in order of an element, a washer, a spring, and a plate and finally lets a bulb pass, with the plate and bulb not assembled which store an element.
However, since it will equip with parts with a small washer etc. with a window shade, an understanding and practice of a configuration are required, and as a technique, it is a wrong way.

J

Full Exhaust System MONSTER

4 oleh Japan User(translated)

Pabrikan: MORIWAKI

Probably, it is a bean-jam-filled wafers (monaka) black steel pipe after all at a zephyr (although it is matter of taste ...)! I...

Probably, it is a bean-jam-filled wafers (monaka) black steel pipe after all at a zephyr (although it is matter of taste ...)! I think that it is simple and suits on a motorcycle well.
Attachment is alone possible enough.
It also becomes kana [ be / when removing the heavy muffler of normal, so that there may be no wound attachment in a frame, an engine, etc. / two persons ], and a remarkable weight saving.
Since sound is with a catalyzer, it is not loud.
When sound-volume kana to the extent that it is not necessary to care also about morning start up, and rotation are raised, it is a moriwaki too.
good -- sound is carried out.

J

Full Exhaust System MONSTER

4 oleh Japan User(translated)

Pabrikan: MORIWAKI

Probably, it is a bean-jam-filled wafers (monaka) black steel pipe after all at a zephyr (although it is matter of taste ...)! I think that it is simple and suits on a motorcycle well.
Attachment is alone possible enough.
It also becomes kana [ be

Probably, it is a bean-jam-filled wafers (monaka) black steel pipe after all at a zephyr (although it is matter of taste ...)! I think that it is simple and suits on a motorcycle well.
Attachment is alone possible enough.
It also becomes kana [ be / when removing the heavy muffler of normal, so that there may be no wound attachment in a frame, an engine, etc. / two persons ], and a remarkable weight saving.
Since sound is with a catalyzer, it is not loud.
When sound-volume kana to the extent that it is not necessary to care also about morning start up, and rotation are raised, it is a moriwaki too.
good -- sound is carried out.

J

Full Exhaust System MONSTER

4 oleh Japan User(translated)

Pabrikan: MORIWAKI

Unlike titanium, there were worries about rust, but it thought that contrast of Black and silver was beautiful, and chose here.
When not riding over a long period of time, probably because it has applied Super CRC fully, for the moment, rust has not c

Unlike titanium, there were worries about rust, but it thought that contrast of Black and silver was beautiful, and chose here.
When not riding over a long period of time, probably because it has applied Super CRC fully, for the moment, rust has not come out.
When a used article etc. are seen, the thing out of which rust tends to come seems to be the curvilinear circles side by the side of a set portion and an engine.
Probably, it is good to be careful around here and to carry out maintenance.
Carburetors are OK with normal.
There is no place which said that especially the bottom became thin (it seems that there is also no place which becomes thick conversely).
The first effect should become light.
Management is dramatically easy.
The point that 2 and the exhaust pipe straight-line part of No. 3 are long in design is slightly dissatisfied.
Moreover, since ground clearance becomes low, at the time of level difference passage, cautions are required.
The motorcycle lift (jack) of form which incidentally receives a frame by stay was able to be used without interfering just before.
Although oil element exchange is impossible with wearing, it is OK even if it will not remove a muffler, if it sets to an engine in order of an element, a washer, a spring, and a plate and finally lets a bulb pass, with the plate and bulb not assembled which store an element.
However, since it will equip with parts with a small washer etc. with a window shade, an understanding and practice of a configuration are required, and as a technique, it is a wrong way.