Kembali ke atas

【SP Takegawa: SP Takegawa】Reinforced Centrifugal Clutch Kit (32-Weight)

    • Penilaian:

Since the normal clutch had been slippery, it exchanged, but in the direction where a plate is set to incorporated ASSY, and it is exchanged by itself since it is this price, it is a recommend.
There is no fault to the extent that, as for the touch wh

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-10-10 01:00:46
Since the normal clutch had been slippery, it exchanged, but in the direction where a plate is set to incorporated ASSY, and it is exchanged by itself since it is this price, it is a recommend.
There is no fault to the extent that, as for the touch which rode after exchange, the pedal became heavy a little at the time of a shift change.
However, since the description of Mukawa also has few photographs at black and white, beginners consider it securer for there to be reference books, such as a service manual.
The holder of a clutch lock nut and a baffle is needed for exchange.

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

J

Reinforced Centrifugal Clutch Kit (32-Weight)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

Expected as expected.

I made a Bore up and made the reduction ratio Large, so Clutch seemed to be slipping during the cruise, so I exchanged it for this. It was as intended and it was very easy to run.

Spec. Is it very good if it is there.

J

Reinforced Centrifugal Clutch Kit (32-Weight)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

Is good

I upgraded CUB 90 to 1XXCC and made it to Taiwan Reinforced Clutch, but I got a sense of slipping and changed it to Makekawa.. There is sense that power is transmitted to Direct, it is good without slipping.

J

Reinforced Centrifugal Clutch Kit (32-Weight)

2 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

Mounting on FILITTLE CUB

FILITTLE CUB (88cc) I tried to move forward even while the Meat Point was too low and stopped.
Also, FI Controller made by Takegawa does not leave the launch because it gets shaky at low speed.
(Various SensorReset, Clutch adjusted)
I immediately returned to NORMAL. The good point is the simplicity of installation and politeness of the Instruction Manual.

J

Reinforced Centrifugal Clutch Kit (32-Weight)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

Cospa Height

LITTLE CUB (Carburetor) I installed it at the same time as 88? Bore up.
Because it seems to slide if it is Normal clutch.
In other Impression etc. well "Clutch got harder"
Although it is written, it is somewhat, I do not mind at all.
The sense of security that it is strengthened more than that is higher.
For desorption, Clutch lock nut wrench is required.
If there is an electric Impact, I will Rose it comfortably.
Embedding uses Torque wrench to manage Torque
I think that it is better to do it.

J

Reinforced Centrifugal Clutch Kit (32-Weight)

3 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

I did not need to strengthen

I installed it in CUB 90. It is an exchange as I was feeling something wrong with Clutch. Engine Displacement Volume is still NORMAL, but it is Engine which is upgrading, balancing and balancing, port processing etc. and power up. I thought that it would be better to strengthen and I chose this. Result NORMAL seems to be better. I guess it's gonna be funny after all.. We reduced the number of sheets. I am not familiar yet but I think I will take a ride for a while. After all there is a limit in Centrifuge Clutch.

J

Reinforced Centrifugal Clutch Kit (32-Weight)

4 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

The meat point is too low and it gets shaky

CUB (Made into 107 cc) Purchased when returning to manual centrifugation with manual clutch.
I am still using it while doing Modify below.

The thing itself is beautiful and solid, but the centrifuge Filter cover is stopping the dish of Screw
The appearance of the head differs completely. After thinking about what to do, if you search well, Large land Copy goods
It seems like M base changed to Takekawa. Conviction.
Of course there is no problem with the function, but I just worried about Screw.
I do not know whether it is an individual difference, but if it is my CUB Clutch adjustment Screw will adjust the range
I have exceeded. Although it can be used for once, it is a mystery because normal things are impossible.
Even though there is no mismatch..

I was slipping with KICK at the beginning of the installation, but if I get on 100 km or so, I am familiar with it
I did not slip. There is no slip even during normal driving.
Pedal is lighter than CUB 90 (Clutch's lightness is light) It is very good to use.
Vibration during high rotation is also less.

I was at a loss for the short time of Meat Point. It's fine when you start, but it's terrible at the time of Shift
I am excited.. I wonder if Bamboo centrifuge is told in the streets.
I am worrying about what to do, eventually reducing the Weight to 28 same as CUB 90 and using it.
Because it becomes quite Smooth, I recommend it to those who are troubled with a feeling of gyroscope.
Rather 2 Quantity : 1 Set of 4pcs. It may be reduced to.
Washer is put in the gap which reduced Weight.

The shape of the internal Parts differs considerably from CUB's Clutch, but regarding the Clutch board
HondaOEM's Clutch board can be used.

Large Land Base is not bad, though accuracy is cheap, Base is Base and cheap, Weight
I think that Merit to introduce is Large Yu Clutch because it can increase and decrease and set it to liking.

J

Reinforced Centrifugal Clutch Kit (32-Weight)

4 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

SP Takekawa Reinforced Centrifugal Clutch Kit (32-Weight)

We exchanged with 88cc Bore up. If I have Special Tools and Impact wrench, Driver to remove Clutch I think that work is easy. Clutch lever, ClutchCamPlate, CamPlateSpring Attention should be paid attention to installation. You can feel that you are surely transmitting power.

J

Reinforced Centrifugal Clutch Kit (32-Weight)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

Cospa high!

Since I began to feel slippery at Normal clutch of C50 88 CCCUB, I bought Takekawa by comparing several.
Initially, I felt the operation feeling was pretty hard, but I felt familiar with 300 km or so, I felt something wrong with my own accident.
In a connection "Snap" I feel a sense of Reinforced Clutch self-assertion.
The feel during Shift seems to be on a different Motorcycle.
There is a sense of confidence in the sense that it is attached firmly even in full-open driving.
At this price this performance is very satisfying.

J

Reinforced Centrifugal Clutch Kit (32-Weight)

4 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

Because NORMAL started out

Brew Up Kit and Clutch was NORMAL, so I started swimming when I changed to 3rd gear, so I exchanged it.
Because I wanted to know how durable it is with NORMAL, maybe the exchange Timing was also good?
I felt it became heavy as an individual opinion.
I have not yet understood how good it is because I've just replaced it, but I'd like to get used to it..
If you are a member of the Bore Up Kit, after considering the labor and labor, it is recommended that you purchase it together and build it up.

J

Reinforced Centrifugal Clutch Kit (32-Weight)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

with Gasket

We also have parts that need to be exchanged, such as Gasket and Lock washer, so if you purchase Special Tools and this set you can exchange Clutch.
I installed it in a 75cc CUB, but the point that changed,
Even at low rotation Clutch became connected and progressed,
Pedal 's stepping on Gear changing became hard,
Even when Gear changing at high rotation, it became connected stably,
is not it.

J

Reinforced Centrifugal Clutch Kit (32-Weight)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

After all it is safe Takegawa made it!

I upgraded to 88cc so I replaced it for Reinforced Clutch

It is saved because Gasket etc is also attached

Although it is a brand new, I built it with Rose all in mind just to be sure, but I think that making it is not bad

Naturally, because it is Reinforced Clutch, just after the exchange "Hard!" Although it becomes heavier, it will not feel like Zensen because it will become familiar soon

There is no problem in operability, Clutch's connection is also very Smooth

It is Recommendation because I think that we can cope well even if Engine Displacement Volume is made a little bigger

J

Reinforced Centrifugal Clutch Kit (32-Weight)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

no problem

I bought it at the same time as KITACO's Bore Up Kit, and I asked the Motorcycle shop to go for the installation.
Frictionally connected with 75 cc rich Torque never slips.
Shift Pedal will be somewhat harder, but it is not to say that you suffer from operations.
It is delicious how delicious the Crankcase gasket comes with.

J

Reinforced Centrifugal Clutch Kit (32-Weight)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

With Gasket is good

With Gasket, it is good to be able to purchase at this price.
I am using it on a vehicle that Bore up to 88 cc, but I can run without problems.
However, compared with OEM, the pedal depression during gear shifting becomes a bit harder. You will soon get used to it.

J

Reinforced Centrifugal Clutch Kit (32-Weight)

4 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

85-cc bore up of the cub 50 was carried out, the big carburetor and the high cam were put in, and since it was almost the time of clutch exchange, the strengthening clutch was released in passing.
Probably, this will be unavoidable since it is a stren

85-cc bore up of the cub 50 was carried out, the big carburetor and the high cam were put in, and since it was almost the time of clutch exchange, the strengthening clutch was released in passing.
Probably, this will be unavoidable since it is a strengthening spring, although the pedal of comment is somewhat hard at the time of a shift.
When a gear was put in from a neutral beginning to use, idling r.p.m. had become falling and stopping unusually.
since -- although it was hard to treat at first, as got used, it became easy-to-use now.
Since there is more weight than normal, after the grade speed which is a flat ground comes out, it is the touch which loosens a throttle and in which a speed can fall and go on a cruise also in feeling.

J

Reinforced Centrifugal Clutch Kit (32-Weight)

4 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

It used for 125-cc centrifugality-ization and does not slide.
Although there are various strengthening centrifugal clutch kits, I think that there is only this in making the strongest centrifugal clutch since 32 weight is original with Mukawa while th

It used for 125-cc centrifugality-ization and does not slide.
Although there are various strengthening centrifugal clutch kits, I think that there is only this in making the strongest centrifugal clutch since 32 weight is original with Mukawa while the other company is 28 weight.
Although the strengthening spring of JUN is one of still stronger, quite hard things as for an attached clutch spring, a difference is not felt to there.
Since a price is also cheap, if it is strengthening of a centrifugal clutch, the recommend of this is carried out.

J

Reinforced Centrifugal Clutch Kit (32-Weight)

1 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

the worst -- Although the case was taken into pieces once again, the clutch body was also taken into pieces and it saw, since it did not go out .... the accuracy of the case in which a clutch plate did not come out -- it will be bad -- it is in a perfect

the worst -- Although the case was taken into pieces once again, the clutch body was also taken into pieces and it saw, since it did not go out .... the accuracy of the case in which a clutch plate did not come out -- it will be bad -- it is in a perfect adhesion state! Is the product check carried out before shipment??? He does not buy the product of 2 times and Coco.