Kembali ke atas

【MDF】Rim Stripe 6M

    • Penilaian:

It is a rim stripe of MDF that carries out a recommend this time.
The rim stripe of MDF can respond to 8~21 inches, and can also choose color from 12 colors.
Since line width also has setting out (4 mm and 6 mm), what suited its own motorcycle can

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-09-28 02:44:09
It is a rim stripe of MDF that carries out a recommend this time.
The rim stripe of MDF can respond to 8~21 inches, and can also choose color from 12 colors.
Since line width also has setting out (4 mm and 6 mm), what suited its own motorcycle can be chosen finely.
Moreover, since it is one side 4 division, attachment is [ that a wrinkle is hard to be made ] also easy.
In a normal wheel, it is one article of a recommend at an unsatisfactory person.

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

J

Rim Stripe 6M

4 oleh Japan User(translated)

Pabrikan: MDF

I was happy to buy it.

I bought it with a light feeling trying to stick it at the end of ChainMaintenance, but it feels nice,
It was easy to paste using exclusive pasting Gauge.
I have not gone to run yet so I do not know the durability but I will buy it again if it comes off.

J

Rim Stripe 6M

5 oleh Japan User(translated)

Pabrikan: MDF

It looks like a different model

I attached it to the Blue Wheel of MT-07.
Impression changed sharply, looks also tightened
It will be fun to ride.

J

Rim Stripe 6M

5 oleh Japan User(translated)

Pabrikan: MDF

It is better to change Image

This time CB 400 SF (Red / Navy), so I bought 6 mm Red.
I always have to buy a new Motorcycle.
I thought for a moment that I should stop as this time, but the impulse was not suppressed as expected.
This time Motorcycle attached Center Stand, but horrifyingly improved working efficiency.
After affixing, I also had my feet gone, I smiled alone by himself.
It is better to lighten Spring's lower weight, even 1 g, but we can not stop this anyway.

J

Rim Stripe 6M

5 oleh Japan User(translated)

Pabrikan: MDF

A shape that is easy to stick and expected durability, but white is white

【What made you decide the purchase?】
In order to hide the Oripe's Stripe painted on the OEMWheel of MT-09 we were looking for things that are black.
Perhaps it may be sending out other Manufacturers, but as far as I was looking, I purchased this because I could only find MDF's items.

【How was it actually used?】
In my case I bought to hide the Stripe painted with OEM to make it an absolutely black Wheel, so I set Guideetc. I pasted it with FreeHand without using it.
You are using a good Material, you can paste it with FreeHand and stick it obediently as you think. Of course, cleaning & degreasing is work on chitin before pasting.
There is no problem in durability, we have been car wash for about 3 times in 3 months from pasting, but there are no signs of peeling now.

【Mounting was difficult?】
Of course, let's do cleaning and degreasing with chitin before pasting. On my experience, this type of stickers are durable significantly unless washed and degreased. Whether waste a number of Sticker or Tank Pad by putting it appropriately in the era without Net (Crying)
When pasting with water, paste a few centimeters at a time, and when you drain as much water as possible with Squeegee every time it will be a beautiful finish. Trying to force it with your finger will not only result in incomplete removal of water but also make the finish dirty.
I am Quantity with it : I rearranged about 2 pc, but the reserve was just Quantity : It was saved because 2pc was there..

【Please tell me the installation point and hang】
In addition to the above construction method, as in the case of me, when sticking from the top of OEM's Stripe paint, warm it with Dryer after sticking and drop the sticker into the step of painting, it gets closer and has more beautiful finish and durability I think that you can get gender.

[Is there anything I was disappointed about?]
It is hard to understand from a distance, but in the case of Black color it is conspicuous in whiteness of the border and it is Minus that the sticker is Barebare when seen nearby.
There are no other dissatisfaction or improvement points.

【Hope for Manufacturer - Please let me know if you have any improvement points]
There are no complaints or improvement points other than White's border, but if it says to you for a moment, since the thing of Black color is not demanded, it is too rare and the places almost unavailable except Net mail order hurts.

【Have you compared items?】
None.
There is almost no Manufacturer issuing Black color Rim sticker.

[Others]
Although it takes some trouble, Small If you have an hour there is also a Large width Makeover of a car of your choice, so if you are thinking.
I will recommend it because the impression of a favorite car changes with a little with a little effort.

J

Rim Stripe 6M

4 oleh Japan User(translated)

Pabrikan: MDF

I was able to paste easily.

I used it for BMW R1200R.

I thought to make it 10 mm, but paste Gauge purchased at the same time

Because it is 4 mm and 6 mm, it was 6 mm.

Thanks to Gauge I could easily paste it.

As you all commented, I did not fail without water spray.

16 - For 17 in inches for 17in. It was Wheel, but about three were too much.

There were two kinds of Tape whose Length were different from the one at the time of purchase,

I did not understand the proper use. If it is a long Tape you can paste with three, but to paste 4 sides

Not enough number. If you paste with a short Tape you will find a shortage marginally.

16in. - 17in. I thought you could tell me what Tape to use.




J

Rim Stripe 6M

4 oleh Japan User(translated)

Pabrikan: MDF

Although it seems to be a little expensive just for Tape

Although it seems to be high only with Tape, I am sticking to the Motorcycle I got on so far and it is not deteriorated and peeled off at all, and since the durability is solid, I changed it to MDF this time as well. It is also good to have round edges and easy to lay back. Paste is also convenient as you can paste easily if you use Gauge paste separately sold.

J

Rim Stripe 6M

5 oleh Japan User(translated)

Pabrikan: MDF

It will be very cool.

Red on Black's Wheel (6?) Stripe pasted g, it looks very nice and it is not cool.
As for the width of Tape, I think that 6? Is appropriate because it is too thin to be poor, 10? Is too fat to highlight the feeling of too much.
We advise you to purchase at the same time because pasting can be easier and cleaner than using a dedicated Guide.
Before pasting, Wheel is degreased well and after pasting it can be pasted to the position where you think that it will not come off if you crimp it while pressing Seal with Dryer.

J

Rim Stripe 6M

5 oleh Japan User(translated)

Pabrikan: MDF

It looks UP!

Whether it's a little Dress-up or not, it looks better and it's Large.
I think the front wheel Left Side pasted last was the best at the end.
Cleaning ⇒ Degreasing ⇒ (Misting ⇒ Pasting ⇒ Press down with fingers to remove air * Repeat) ⇒ It is done by drying with dryer.
Work is recommended on a sunny, windy day.
Just looking at people you do not know, what are you doing at Dryer (Lol) I think.

J

Rim Stripe 6M

5 oleh Japan User(translated)

Pabrikan: MDF

Easy Makeover!

MDF Mdief Rim stripe Repeat.

Up to now, 4 mm was used for KSR-PRO.
This time, it is Imechen with 6 mm wide which is one size wide.
Color, of course, my favorite Lime green!

As Minimoto, 4 mm was enough, but I wanted to give a bit more Defferential Gear sense, I tried thickening my feet Line.

Although it is private, I am very happy with the finish of Image street!

Line is divided into 4, so anyone can easily stretch it without removing the wheel from the car body.
Also, reserve is Quantity : 2pc I can also work without worrying about failures, so I feel very comfortable!

Potential of the product, ultraviolet ray countermeasure UV processing and Thick 3 layer Seat (Adhesive surface, printed surface, protective surface) In the structure, Tough that does not impair the looks' makeover is on sale.

Makeover easily without hanging on Cost!
How about you, too?

J

Rim Stripe 6M

4 oleh Japan User(translated)

Pabrikan: MDF

MDF Moodie F Rim Stripe 6M

It was Race ish feeling. It's a handy Dress-up, but it will come off if you do not steadily degrease.
Very Parenthesis I got better !!
Please dry thoroughly when sticking. If it does not go well it will get wet and get rid of it.
You can stick it if it holds firmly inside the adhesive.

J

Rim Stripe 6M

4 oleh Japan User(translated)

Pabrikan: MDF

The atmosphere changes considerably

Since I was interested in Rim stripe for a long time, I bought this one with a lot of options with high evaluation.
There are no signs of peeling even after one year passed since the corner is rounded from the beginning and that we are using weatherable Material.
Washing - Performing degreasing firmly, if you use Gauge for exclusive use sold separately, even beginners can work easily.
I think that it is good to have been optimized for each Inch.

This time, I bought Red of 6 mm, but I think that 4 mm is more likely to be OEM style.

J

Rim Stripe 6M

5 oleh Japan User(translated)

Pabrikan: MDF

I am indebted to you every time..

Every time I change Motorcycle every time I am indebted.
I used to go with FreeHand until now, but I'm afraid that I run out of Spare - - -
This time, I will take care of the dedicated pasted Gauge and Spare is still there. I never peeled so far, so I'm sure this time I think Large is durable.
Working time was around 15 minutes.

J

Rim Stripe 6M

4 oleh Japan User(translated)

Pabrikan: MDF

Rim stripe6mm

I bought Rim stripe 6 mm and stuck it on a 12 inch foil. In the explanation movie, I kept wearing the foil, but this time it seemed to be stuck, so I pulled out with the foil removed
Of course, I also bought a dedicated Gauge and worked
It was easy to paste when there was a dedicated Gauge
Simultaneous purchase is recommended

J

Rim Stripe 6M

5 oleh Japan User(translated)

Pabrikan: MDF

I am satisfied.

Last time I bought MDF this time because I failed with cheap Rim sticker. Simultaneous purchase is recommended as it can be affixed to Beauty when using dedicated Gauge

J

Rim Stripe 6M

4 oleh Japan User(translated)

Pabrikan: MDF

MDF Rim stripe

I thought it was difficult to paste by myself, but it was surprisingly easy to do.
The details of how to paste it on You Tube came out so I tried it exactly and it made it beautiful myself.
The feeling I saw with only this thing is completely different.
I hope I pasted it sooner.

J

Rim Stripe 6M

3 oleh Japan User(translated)

Pabrikan: MDF

So so

When I actually stuck it, the width of the Tape was thin, it was not a finished image that I was imaging so much. However, since it will be your liking, that point ... I think that the product itself is a product with a price. I can easily do Imechen.

J

Rim Stripe 6M

5 oleh Japan User(translated)

Pabrikan: MDF

Pasting was easy

Pasting was very easy. It may be because I used Guide, but there was no mistake in spite of pasting for the first time, it was easy and the result was good. Very Race ish, luxurious feeling has increased.

J

Rim Stripe 6M

5 oleh Japan User(translated)

Pabrikan: MDF

Rim stripe

I tried sticking Rim stripe Gray 6 mm.
Very durable and easy to affix, affordable so feel free to imechen it is Large satisfied.
I am looking forward to what color we will make next time

J

Rim Stripe 6M

5 oleh Japan User(translated)

Pabrikan: MDF

To the decoration of ZX-6R

I bought it because it is easy to decorate.
My ZX - 6R was 14 years MODEL and the proportion of Green Light was small, so I decorated it slightly with this Items.
It is easy to install, and I am satisfied that the durability is quite good.

J

Rim Stripe 6M

5 oleh Japan User(translated)

Pabrikan: MDF

A little I guess it's expensive, but I feel fancy

It is a bonsai Parts which can be a little Happy by being a fashionable one's feet.
Because Rim is rattling, I am thinking that it is somehow a good Accent though it is paste with the meaning to cheat.
Although it was difficult to stretch using a special tool, it was not easy to be pretty, but I was lucky because I do not know even if it is slightly distorted as it is stopped. Satisfaction is a high product.