Kembali ke atas

【ACERBIS】LED Tail Light

    • Penilaian:

The whole stay was removed with the pure mudguard of XR250, and fixed attachment was directly carried out on three attached screws at the fender.
Appearance is very good, is felt refreshed and also becomes a weight saving.
The visibility of a tail

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-09-19 20:12:18
The whole stay was removed with the pure mudguard of XR250, and fixed attachment was directly carried out on three attached screws at the fender.
Appearance is very good, is felt refreshed and also becomes a weight saving.
The visibility of a tail lamp merely gets extremely bad.
Moreover, it will not be attached to a main part if the fitting hole of a number is also a regular location.
I used the hole on the right-hand side of a number as it was, and it punctured left-hand side to the number itself.
Although attached in the state where it offset on the left, since the right has a silencer, it is comfortable, and I think that it is good.

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

J

LED Tail Light

5 oleh Japan User(translated)

Pabrikan: ACERBIS

Although not attached yet, it has a small light weight as expected!
fixing position check was carried out. b

which is a best match at the lightweight Slim body of
TRIAL vehicle -- a Number mounting hole and a Blinker mounting hole need to

Although not attached yet, it has a small light weight as expected!
fixing position check was carried out. b

which is a best match at the lightweight Slim body of
TRIAL vehicle -- a Number mounting hole and a Blinker mounting hole need to be processed in case of the purpose of use like me. (When you want to attach to a Tail)

J

LED Tail Light

4 oleh Japan User(translated)

Pabrikan: ACERBIS

[Webike Monitor] It is used in order to make
CRF 100F into public road specification.
Very satisfactory, since a Rear fender is well suited as ordered.
attachment Screw is for [ which is fundamentally made somehow in gauging although it is at

[Webike Monitor] It is used in order to make
CRF 100F into public road specification.
Very satisfactory, since a Rear fender is well suited as ordered.
attachment Screw is for [ which is fundamentally made somehow in gauging although it is attached once ] persons.

J

LED Tail Light

5 oleh Japan User(translated)

Pabrikan: ACERBIS

It is light! It is thin! It contributes to the small size ! and a weight saving.
It seems that there is no problem also in reinforcement although the hole was made in this side and the blinker is attached directly.

It is light! It is thin! It contributes to the small size ! and a weight saving.
It seems that there is no problem also in reinforcement although the hole was made in this side and the blinker is attached directly.

J

LED Tail Light

4 oleh Japan User(translated)

Pabrikan: ACERBIS

It is a lightweight compact anyway.
although it is made to hit here and there violently fairly, there is no sign of breaking -- ! -- however ... since it is too compact, it being able to equip, if the number for mopeds does not carry out stay creation

It is a lightweight compact anyway.
although it is made to hit here and there violently fairly, there is no sign of breaking -- ! -- however ... since it is too compact, it being able to equip, if the number for mopeds does not carry out stay creation, either, and standard wiring are too thin, and somewhat uneasy.