Kembali ke atas

【POSH】Machining Net Ankor

    • Penilaian:

Since a seat bag was fixed, he bought it.
It has attached to the rear suspension upper of a zephyr 1100.
If there is even a tool, attachment will not take 5 minutes.
But it is very convenient.
Although he bought the seat bag of the rough a

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-09-03 21:51:45
Since a seat bag was fixed, he bought it.
It has attached to the rear suspension upper of a zephyr 1100.
If there is even a tool, attachment will not take 5 minutes.
But it is very convenient.
Although he bought the seat bag of the rough and road simultaneously, it is simply and certainly fixable.
^^. If a rear suspension portion is used again, since the rubber of a bag comes to the distant location, there are also no worries about a wound from a car body.
^^. Highest! Does it worry, when the muffler of the up type is used and muffler stay is attached to the rear suspension upper, although it is what?
^^;. The one who is using the KERKER pipe is - which is a five stars perfectly ^^

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

J

Machining Net Ankor

4 oleh Japan User(translated)

Pabrikan: POSH

Buy without loss

I bought it in preparation for Hokkaido Touring.
It is used as Loading Hook in the License Plate to raise the loading capacity.

With this, it is now possible to tie baggage to the extent that Tail lamp is not hidden on Rear Fender.
I also feel like playing a part in Dress-up style.

However, I think whether it is a little expensive personally.
It is not something to make tens of thousands of yen ^ ^;

J

Machining Net Ankor

4 oleh Japan User(translated)

Pabrikan: POSH

It is convenient to have it

I bought DOrange, but because there was some red color and the color tone did not match, I used it painted in Orange color.
Easy to install, easy to use.

J

Machining Net Ankor

5 oleh Japan User(translated)

Pabrikan: POSH

Klx, dTRACKER 125

The Rear Fender of klx, dTRACKER 125 has rigidity because it contains iron Frame, and if you replace the installation Bolt of License Plate with this Hook, baggage will be loaded even without Carrier. It is recommended not to be heavy.

J

Machining Net Ankor

3 oleh Japan User(translated)

Pabrikan: POSH

To hook on Hook!

Ideal for hook hooking. Since there are several colors, it is GOOD that you can choose your own car and color of your choice!
However, because the attached Bolt was not necessary, it is cheap Spec. I thought that there was. Depending on the installation location, it was disappointing that Bolt was long or short, and Bolt's purchase increased separately.

J

Machining Net Ankor

5 oleh Japan User(translated)

Pabrikan: POSH

Texture is good!

Because of resin Tank with a lot of curved surface, Tank Bag is hard to use, I use it for Loading Hook of MONSTER S2796.
I liked the design of Tandem Sheet Cover and I did not want to remove it, but this one is attachable without removing Cover, and it is useful as an emergency use when the package has increased at the destination.

I do not feel uncomfortable in appearance, I think that I will not mind even if I leave it on.

If you put the baggage in the same way, it is safe to use a non-slip Seat so that it will not slip off and slip off.

J

Machining Net Ankor

5 oleh Japan User(translated)

Pabrikan: POSH

Since the Hook which fixes a Touring net etc. is insufficient on the outskirts of rear ones of Ninja250R, it purchases. Since
> mounting instruction is only exchanged for the Bolt which is fixing the Number plate, it is very easy. Although
g

Since the Hook which fixes a Touring net etc. is insufficient on the outskirts of rear ones of Ninja250R, it purchases. Since
> mounting instruction is only exchanged for the Bolt which is fixing the Number plate, it is very easy. Although
goods purchased red, a color is becoming thin by degradation now when it uses in several years.

As a result of attaching this product, it came to be able to perform fixation of a Tandem-step portion, a pure rear Hook Number-plate portion, and a total of six Touring nets. Since the
load is stabilized and can be fixed, it is large satisfaction!

J

Machining Net Ankor

4 oleh Japan User(translated)

Pabrikan: POSH

It replaced with the top captive screw of the Rear shock of CB1300 SC40, and attached. Although it will use as a loading hook originally [
], a built-in Hook is just before a Rear shock, and since that one is larger and easy-to-use, it is not functio

It replaced with the top captive screw of the Rear shock of CB1300 SC40, and attached. Although it will use as a loading hook originally [
], a built-in Hook is just before a Rear shock, and since that one is larger and easy-to-use, it is not functioning as a loading hook. I think that the
thing of the texture of an Anodized itself is also good, and it is a good thing.
-- in short, it uses how -- or .

J

Machining Net Ankor

4 oleh Japan User(translated)

Pabrikan: POSH

The tandem belt was removed, attached and carried out.
Although it may not be so practical in location, I think that he is smart as a one point.
Also when riding, it did not become obstructive in particular.
I think that I will look for the ne

The tandem belt was removed, attached and carried out.
Although it may not be so practical in location, I think that he is smart as a one point.
Also when riding, it did not become obstructive in particular.
I think that I will look for the net or rope which can be used in this location.

J

Machining Net Ankor

4 oleh Japan User(translated)

Pabrikan: POSH

It is truly helpful when fastening a load to a rear seat.
It attached to the bolt portion of the upper part of rear suspension.
Attachment is also only possible in between.
It has attached with the zephyr x, without also exchanging the die len

It is truly helpful when fastening a load to a rear seat.
It attached to the bolt portion of the upper part of rear suspension.
Attachment is also only possible in between.
It has attached with the zephyr x, without also exchanging the die length of an attached cap bolt well exactly.
Appearance also becomes good and is recommended.

J

Machining Net Ankor

4 oleh Japan User(translated)

Pabrikan: POSH

From the first, although a kawasaki has many substantial motorcycles, such as a loading hook, it is slightly uncertain by pure hook at the time of touring with many loads.
Then, in order to make fixation of a seat bag into a positive thing, it equippe

From the first, although a kawasaki has many substantial motorcycles, such as a loading hook, it is slightly uncertain by pure hook at the time of touring with many loads.
Then, in order to make fixation of a seat bag into a positive thing, it equipped with this article.
Attachment is very easy.
The securing bolt of a rear shock is only exchanged for this article.
After wearing, the hold nature of a seat bag improves, and it is fixed firmly, and can run now in comfort.
rather than equipping with a carrier -- appearance -- shapely .
It is a recommend at the motorcycle of 2 shocks.
However, the direction of chain wallet use should be careful to be unable to scratch.

J

Machining Net Ankor

3 oleh Japan User(translated)

Pabrikan: POSH

The places of a loading hook increase in number by attaching this.
Attachment only attaches this to a change of the bolt which has stopped sheathing.
If even a screw hole suits, it is attached anywhere.
I think that they are ideas goods which

The places of a loading hook increase in number by attaching this.
Attachment only attaches this to a change of the bolt which has stopped sheathing.
If even a screw hole suits, it is attached anywhere.
I think that they are ideas goods which are not.