Kembali ke atas

【COERCE】Rear Fender

    • Penilaian:

It has attached to the hornet 600.
When processing had any equipment shaved although it is required, it was not serious.
The cheapness of normal is erased as a good point and it becomes smart about appearance.
Clearance with a tire is also sec

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-08-27 19:56:46
It has attached to the hornet 600.
When processing had any equipment shaved although it is required, it was not serious.
The cheapness of normal is erased as a good point and it becomes smart about appearance.
Clearance with a tire is also secured enough.
Since it is expensive, it is *-1, but they are recommended goods.

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

J

Rear Fender

4 oleh Japan User(translated)

Pabrikan: COERCE

It is a cool item.

Easy to install Just fit.

Refreshing downward when installed.

I bought Carbon, but I wish it was a bit cheaper - - -

J

Rear Fender

4 oleh Japan User(translated)

Pabrikan: COERCE

The preventable contamination of the circumference of rear one and a Dress-up up can also be performed, and attachment is easy. since it does not interfere in a Tire although the Center was shifted a little [
] -- OK .

The preventable contamination of the circumference of rear one and a Dress-up up can also be performed, and attachment is easy. since it does not interfere in a Tire although the Center was shifted a little [
] -- OK .

J

Rear Fender

4 oleh Japan User(translated)

Pabrikan: COERCE

It is if after attachment prevents the grip force fall by the cold of a Rear tire as well as splashes-of-mud prevention in a satisfaction
function surface with the hidden Dress-up goods up which understand the person of a Motorcycle lover immediately

It is if after attachment prevents the grip force fall by the cold of a Rear tire as well as splashes-of-mud prevention in a satisfaction
function surface with the hidden Dress-up goods up which understand the person of a Motorcycle lover immediately although it is not conspicuous. the long-distance Touring which changes
road surface temperature -- sense of security -- it is .

J

Rear Fender

4 oleh Japan User(translated)

Pabrikan: COERCE

With glancing, the circumference of rear one becomes tight, and unclear custom-made one serves as an intrepid atmosphere, and is pleasing. I think that it needs to use a Maintenance stands on the occasion of
attachment since a HORNET does not have a

With glancing, the circumference of rear one becomes tight, and unclear custom-made one serves as an intrepid atmosphere, and is pleasing. I think that it needs to use a Maintenance stands on the occasion of
attachment since a HORNET does not have a Center stand. There is the prevention effect exactly in after [
] Dollo, the Suspension neighborhood becomes difficult to become dirty, and it is satisfactory.

J

Rear Fender

4 oleh Japan User(translated)

Pabrikan: COERCE

The purchase motive of the Rear fender was protection
of the winding-up prevention
O Rear suspension from a
O Style
O Rear tire.

The purchased Rear fender was a black Gel, the surface blew the Solid black and the rear face ble

The purchase motive of the Rear fender was protection
of the winding-up prevention
O Rear suspension from a
O Style
O Rear tire.

The purchased Rear fender was a black Gel, the surface blew the Solid black and the rear face blew the Undercoat.
When this is used with a Gel, it is a measure against a crack by prevention of a Gel deteriorating and the surface carrying out a white Japanese quince, and winding up of Hitoshi Oishi on the back.

, now the actually attached comment have cleared two of three points of a purchase motive perfectly.
It is protection of a Style and a Rear suspension.
True satisfaction is carried out about this. Sand accumulates in the origin of a Rear suspension too by が and winding up from a Rear tire.
Although this is freely conjectured whether it is a factor that the place of a Rear fender and a Rear suspension has a crevice between some, it is sorry about getting, more than the quantity of the
pebble or sand considered too. Any problem cannot be found if it passes quickly with
, however a Hose. At the
> last -- The Parenthesis of a Carbon will be good if you buy it too. --

J

Rear Fender

4 oleh Japan User(translated)

Pabrikan: COERCE

Hornet250 (98') was equipped. Although the dirt of the Rear suspension was severe, it has been improved considerably. Since the screw hole was merely shifted with accuracy not sufficient [ so ], it was processed by itself and attached.

Hornet250 (98') was equipped. Although the dirt of the Rear suspension was severe, it has been improved considerably. Since the screw hole was merely shifted with accuracy not sufficient [ so ], it was processed by itself and attached.

J

Rear Fender

5 oleh Japan User(translated)

Pabrikan: COERCE

It purchased for appearance and rear suspension protection.
It equips and is very pleasing.
It has played a role of a fender firmly.
However, since clearance on either side cannot be taken firmly, it is adjustment required.

It purchased for appearance and rear suspension protection.
It equips and is very pleasing.
It has played a role of a fender firmly.
However, since clearance on either side cannot be taken firmly, it is adjustment required.

J

Rear Fender

5 oleh Japan User(translated)

Pabrikan: COERCE

With carbon, appearance is also good and light.
Since it was accurate, attachment was also easy.
Rear suspension also becomes difficult to become dirty and it is dramatically pleasing.

With carbon, appearance is also good and light.
Since it was accurate, attachment was also easy.
Rear suspension also becomes difficult to become dirty and it is dramatically pleasing.

J

Rear Fender

5 oleh Japan User(translated)

Pabrikan: COERCE

Colet bought it hornet 250 and equipped the very first.
A fender equips for the purpose rather than rectification of air of the circumference of a rear wheel.
The appearance of a carbon raw material is also racy and it has said it to mind.
Str

Colet bought it hornet 250 and equipped the very first.
A fender equips for the purpose rather than rectification of air of the circumference of a rear wheel.
The appearance of a carbon raw material is also racy and it has said it to mind.
Structure is [ attachment ] also solid by bolt on.
However, since clearance with a tire is fairly last-minute, they are worries about a little whether it is interfering with the form of a tire at the time of a tire change.

J

Rear Fender

4 oleh Japan User(translated)

Pabrikan: COERCE

Although the rainy day did not ride fundamentally, also after riding on a rainy day, the circumference of rear one did not become dirty so much.
It also becomes an accent of appearance.

Although the rainy day did not ride fundamentally, also after riding on a rainy day, the circumference of rear one did not become dirty so much.
It also becomes an accent of appearance.

J

Rear Fender

5 oleh Japan User(translated)

Pabrikan: COERCE

prevention of water or mud HANE -- the attachment considered and purchased is very easy --
After removing the chain cover which removes a back step first and is attached now, there was an opportunity only attach the rear fender of WAKOSU on three scre

prevention of water or mud HANE -- the attachment considered and purchased is very easy --
After removing the chain cover which removes a back step first and is attached now, there was an opportunity only attach the rear fender of WAKOSU on three screws to actually run on a day after the rain, but.
Water does not hit a spring etc. directly and I feel that the easy impression of appearance also became somewhat good also for wiping.

J

Rear Fender

4 oleh Japan User(translated)

Pabrikan: COERCE

Since splashes of mud were severe, it is a coerce. NewRS rear fender It purchased.
being related with attachment -- it is -- although -- removing a left step by a hexagon wrench (work is possible even if it does not remove thoroughly) -- only changing

Since splashes of mud were severe, it is a coerce. NewRS rear fender It purchased.
being related with attachment -- it is -- although -- removing a left step by a hexagon wrench (work is possible even if it does not remove thoroughly) -- only changing for the chain cover of normal.
Right-hand side uses the bolt which is fixing the rear hose as it is.
It was the end of work in bolt on without excessive processing at about about 30 minutes.
Although the clearance with a tire was worrisome, there was a splendid margin with 5~8 mm.
Although it was the comment with which it equipped, Sas was beautiful even after the wet road surface run, and cleaning also became easy.
He has a feeling whose surroundings of the rear tire settled, and it is pleasing also in appearance.
However, it does not understand about lower two.
- Prevent involvement of the wind into a tail cowl and reduce turbulence of an air current.
- Prevent a grip force fall by the cold of a rear tire.
Since the pure chain guard was removed, the sticker of air pressure was purchased.
(It makes a selling point of brand-name parts) If an unfamiliar person sees, it will be satisfied with if visible like standard equipment.

J

Rear Fender

4 oleh Japan User(translated)

Pabrikan: COERCE

Although the stepping stone to rear suspension strayed with the product made from carbon been [ the product / it ] worrisome and purchased, FRP was used because a price is different near double.
Since I think that there is cost effectiveness which is

Although the stepping stone to rear suspension strayed with the product made from carbon been [ the product / it ] worrisome and purchased, FRP was used because a price is different near double.
Since I think that there is cost effectiveness which is not uncomfortable considerably even if the surface preparation of a gel coat is beautiful and it attaches it without paint application as it is than expected, it is recommended!

J

Rear Fender

4 oleh Japan User(translated)

Pabrikan: COERCE

It has been one year since it attached to HONERT.
Please give me attachment at the time of motorcycle purchase.
If it has not attached, I will think thoroughly that a car wash will be troublesome.
Those who regard their own car as it riding fo

It has been one year since it attached to HONERT.
Please give me attachment at the time of motorcycle purchase.
If it has not attached, I will think thoroughly that a car wash will be troublesome.
Those who regard their own car as it riding for a long time recommend you to attach some prices, even if it bears.
Moreover, HORNET is recommended also in the direction which thinks that the circumference of rear one is somewhat lonely by Kami of appearance.
In fact, it was the cause which was regarded as my attaching by appearance serious consideration from a practical use side.

J

Rear Fender

5 oleh Japan User(translated)

Pabrikan: COERCE

Since the splashes of mud of RIYA of the hornet 250 were frightful, it purchased and equipped with the coerce rear fender.
Wearing is very easy.
A left step is removed (work is possible even if it does not remove thoroughly), and as it changes for

Since the splashes of mud of RIYA of the hornet 250 were frightful, it purchased and equipped with the coerce rear fender.
Wearing is very easy.
A left step is removed (work is possible even if it does not remove thoroughly), and as it changes for a normal chain cover,
It was OK in bolt on without entire processing.
Sas is beautiful even after the wet road surface run, cleaning also becomes easy, and this is a rare object of art!

J

Rear Fender

3 oleh Japan User(translated)

Pabrikan: COERCE

It does not take time, although a step is obstructive at the time of removal with troublesome removing at the time of the maintenance of a chain and it is hard to pay a tool.
Since mud does not go to the Sas side, it is good.
Furthermore, the lone

It does not take time, although a step is obstructive at the time of removal with troublesome removing at the time of the maintenance of a chain and it is hard to pay a tool.
Since mud does not go to the Sas side, it is good.
Furthermore, the lonesomeness of the swing arm circumference is lost.
In the function surface, I thought that there was no bad place.