Kembali ke atas

【DAYTONA】Short Side Stand

    • Penilaian:

Die length did not suit a motard spring set.
Moreover, paint application is also poor and has separated immediately.

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-08-10 16:35:41
Die length did not suit a motard spring set.
Moreover, paint application is also poor and has separated immediately.

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

J

Short Side Stand

5 oleh Japan User(translated)

Pabrikan: DAYTONA

Required for Lowdown cars

Although I used the O Terrain as a D tiger low down for a while for a while, the car body was too standing and I decided to introduce Short Stand because it was hard to use with something.

It was 35 mm shorter than OEMSTAND, and it was exactly the right length for a car body low down 50 mm. However, although the inclination of the car body is just fine, the angle of the ground plane of the STAND does not coincide with the ground, and about half of the ground plane is not grounded and floating.

The color changed from OEM Silver to Black, but Frame was also exactly the same as Black.

J

Short Side Stand

5 oleh Japan User(translated)

Pabrikan: DAYTONA

It may be necessary for lowdown cars

D tiger was low down for about 50 mm, then it was used for a while as OEMSTAND, but because it was hard to use with something, I decided to introduce Short Stand.

It was 35 mm shorter than OEMSTAND, and it was exactly the right length for a car body low down 50 mm.

The color changed from OEM Silver to Black, but Frame was also exactly the same as Black.

J

Short Side Stand

3 oleh Japan User(translated)

Pabrikan: DAYTONA

Installation complete!

D-TRACKER250 (2004) Was purchased in second hand, DAYTONA 's 30 mm LowdownKit was attached, but STAND was still NORMAL and it was so dangerous that I decided to purchase it.
OEMSTAND is Silver, but BlackSilver was not found in this product, so I bought black.

* I wonder if it was true or not Silver would also be good as Items.

After purchasing, Silver got paint so it became high shopping. (T_T)

I think that I would appreciate it if it is a little cheaper because it is a necessary item if you buy a Lowdown Kit with Other Company Product.

Photo Left is Normal stand, Right is after Short Stand installation.

J

Short Side Stand

3 oleh Japan User(translated)

Pabrikan: DAYTONA

It has combined with the posh lowdown link (3 cm).
It projects and a front fork is 1.5 cm.
Since the motorcycle became vertical when it was a normal stand, it attached.
It is good touch.

It has combined with the posh lowdown link (3 cm).
It projects and a front fork is 1.5 cm.
Since the motorcycle became vertical when it was a normal stand, it attached.
It is good touch.