Kembali ke atas

【DAYTONA】Turbo Filter Sheet

    • Penilaian:

It cut according to the form of an original manufacturer's product.
Three more sheets are likely to be made.
Since it was thicker than the original manufacturer's product, it was a little anxious, but attachment was also satisfactory.
Although

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-08-03 17:09:33
It cut according to the form of an original manufacturer's product.
Three more sheets are likely to be made.
Since it was thicker than the original manufacturer's product, it was a little anxious, but attachment was also satisfactory.
Although I carry out [ mind / like good touch / whose way of an effect is also ], in exchange of consumable goods, it is reasonable above all.

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

J

Turbo Filter Sheet

4 oleh Japan User(translated)

Pabrikan: DAYTONA

Easy to use and washable Filter

Also using the same Filter in Address
Since it was easy to use, it is also adopted for CB 223S when replacing the Exhaust System.
Take off the paper part of OEMFilter
Cut the Turbo filter to the same Large size and fit it in
Prevent dropout with Stainless Steel's needle gold to prepare.
Even Size here, you can get two copies for CB 223 S or FTR
It will be for washing change.

J

Turbo Filter Sheet

4 oleh Japan User(translated)

Pabrikan: DAYTONA

Processed and used

Because OEM Filter of VTR 250 was a paper like filter instead of Sponge, I thought that Turbo filtering was impossible.
Then I found a blog of people who are installing with Net! It was pretty easy and unexpectedly a MAJOR Custom between VTRUser.

Just peel off the paper part of the OEM Filter, then just fit the Turbo filter to the frame of the Filter and cut it. I am temporarily stopping at Wiring.

Since my vehicle is Injection, it seems that it will not get much effect even if the amount of inspiration is increased, so I will set the settings of the sub computer later.

J

Turbo Filter Sheet

5 oleh Japan User(translated)

Pabrikan: DAYTONA

DAYTONADAYTONA Turbo filter sheet

As usual it was an exchange with OEM Product
This time it was Filter here.
somehow - - - but
There is no resistance than OEM, it will rise naturally
I feel it..
I tried it for the first time, but I think this is

J

Turbo Filter Sheet

5 oleh Japan User(translated)

Pabrikan: DAYTONA

Change Filter for MD50 to Element type which can be battlefield

Punching meshPlate was welded to the air element Housing of the OEM and the DAYTONATurbo filter was wrapped like a photograph. Fee Ring got dizzy on the whole. After Air screw back 30 degrees (Air flow rate was increased) The burning condition of Plag became good as well.
As the engine fails, the upper part of the MD 70 is damaged and returned to 50 cc, so we are going as a setup before replacing with KITACO 75 cc Kit.

J

Turbo Filter Sheet

5 oleh Japan User(translated)

Pabrikan: DAYTONA

With KSR 110, Quantity : 1 Set of 4pcs. It can be divided..

Just like Quantity at 250 x 200 mm : 1 Set of 4pcs. I was able to do it..
Although I had a hard time cutting it, I first made it with Cutter Large, cut it, cut it easily with scissors and made it easy.
As the Engine is still overhauling yet, we can not confirm the performance change, but it seems pleasing that the inflow of air surely increases, so I'm looking forward to it.

J

Turbo Filter Sheet

5 oleh Japan User(translated)

Pabrikan: DAYTONA

I got the results as expected

My Motorcycle (XL-DEGREE) Normal filter filter paper with Cutteretc. Remove it with Turbo filter Cut it to a good Size and put it in, it is complete.

I tried running, but for the time being, acceleration is faster than ever. Is not the highest speed also going up?.
Once you taste it, you can not return it to NORMAL anymore. (^^)
It seems that starting has improved slightly.
I feel like running, I do not feel particularly bad.
I should have bought sooner.

By the way, Carburetor setting has not been modified, and Exhaust System is also NORMAL.

The inspiratory sound seems to be noisy depending on the Motorcycle, but I did not care much about myself.
It depends on the shape of Air Cleaner BOX.

Due to the fact that my Motorcycle was originally clueless, I installed this filter and it was just fine
It sounds like it got it.
Durability and life etc.. I do not know yet,
My Motorcycle can be taken three times with 1 Seat so it's quite profitable like Cost.
Also, even if NORMALFilter becomes out of stock in the future, that concern no longer exists.

Because of the characteristics of the product, basically it can only substitute for a plate-shaped Filter. I wanted to attach it to SUPER CUB, but I can not affix it to a cylindrical Air filter.

J

Turbo Filter Sheet

5 oleh Japan User(translated)

Pabrikan: DAYTONA

Since adjustment of the carburetor was required when it was a Power filter, it was made this Filter that does not require time and effort. If it becomes dirty since it is
dry type, washing in cold water is also likely to be possible.

Since adjustment of the carburetor was required when it was a Power filter, it was made this Filter that does not require time and effort. If it becomes dirty since it is
dry type, washing in cold water is also likely to be possible.

J

Turbo Filter Sheet

4 oleh Japan User(translated)

Pabrikan: DAYTONA

[Webike Monitor] Since there was no object for

RGV250, general-purpose Colet was used.
Since it compared that it is pure and was thick, it became a little forcibly at the time of loading. If there is this [ no ] although it is
>, is

[Webike Monitor] Since there was no object for

RGV250, general-purpose Colet was used.
Since it compared that it is pure and was thick, it became a little forcibly at the time of loading. If there is this [ no ] although it is
>, is wet pure carried out and is it saved in that suiting? Since it is
> dry type, if it washes and dries with neutral detergent, it is wonderful that it can use immediately.

, of course, since inhalation resistance decreases, it is perfect also as a Custom parts.

J

Turbo Filter Sheet

3 oleh Japan User(translated)

Pabrikan: DAYTONA

It purchased in order to exchange the Filter of an ELIMINATOR 125.
Although the old Filter was put on the top, and it trimmed with the Magic and being cut off with scissors, the Filter of two sheets was able to be created with this product. One she

It purchased in order to exchange the Filter of an ELIMINATOR 125.
Although the old Filter was put on the top, and it trimmed with the Magic and being cut off with scissors, the Filter of two sheets was able to be created with this product. One sheet is kept as a reserve. The honest difference was not understood although it was the comment which rode after
exchange. It seems that however, the suction quantity of exhaust air increased clearly since idling engine speed went up.

J

Turbo Filter Sheet

3 oleh Japan User(translated)

Pabrikan: DAYTONA

It exchanged for the turbo filter instead of the pure filter.
If it is KSR110, I can photograph by four sheets in S size, and will think that it is cheap in cost.
(It is another whether no less than four sheets are required) However, since thickne

It exchanged for the turbo filter instead of the pure filter.
If it is KSR110, I can photograph by four sheets in S size, and will think that it is cheap in cost.
(It is another whether no less than four sheets are required) However, since thickness does not suit, the portion equivalent to which the presser foot of a filter is needs processing which attaches a dent.
I think that the granularity of Sakka of a filter is two layers, a thickness of about 2 mm and the ruder one fall in about 3-time granularity also with fine pure Ho, and inhalation resistance falls clearly in the state of SUKASUKA mostly.
Since the flow velocity of intake air would go up and many gasolines would be sucked out if it actually equips, AS became adjustment in the direction to extract.
It was a grade of the kana which can blow it on a smooth a little in the pure state since a carburetor/muffler is only filter replacement.
Those who exchange the filter which became old, and those who do adjustment of a final suction amount think if it is used once and sees.

J

Turbo Filter Sheet

3 oleh Japan User(translated)

Pabrikan: DAYTONA

According to situations, there is not nothing and it used for pure return from the direct carburetor.
It was inhaling from normal and, also in the top, the dandruff became good.

According to situations, there is not nothing and it used for pure return from the direct carburetor.
It was inhaling from normal and, also in the top, the dandruff became good.

J

Turbo Filter Sheet

4 oleh Japan User(translated)

Pabrikan: DAYTONA

Since it is [ liking ] processible, vehicles without a lineup can also realize a turbo filter.
I am pleasant for the suction noise to have become large and for sound to which the turbo was attached completely to have ridden.

Since it is [ liking ] processible, vehicles without a lineup can also realize a turbo filter.
I am pleasant for the suction noise to have become large and for sound to which the turbo was attached completely to have ridden.

J

Turbo Filter Sheet

3 oleh Japan User(translated)

Pabrikan: DAYTONA

since it was alike together at the time of the exchange which it was [ exchange ] worrisome and purchased that the filter pure at the time of the maintenance used for RG125gamma (NF13A) is dirty and processing of the air cleaner BOX was also carried out.

since it was alike together at the time of the exchange which it was [ exchange ] worrisome and purchased that the filter pure at the time of the maintenance used for RG125gamma (NF13A) is dirty and processing of the air cleaner BOX was also carried out.
It seems that the suction noise will be large and it would be effective although it did not understand whether it was the favor of a filter.

J

Turbo Filter Sheet

4 oleh Japan User(translated)

Pabrikan: DAYTONA

It unites with full exhaust conversion and purchases for the purpose of the increase in a suction amount.
It was used for bandit250 (GJ77A).
The pure filter no longer using was disassembled, and the original turbo filter was manufactured using the

It unites with full exhaust conversion and purchases for the purpose of the increase in a suction amount.
It was used for bandit250 (GJ77A).
The pure filter no longer using was disassembled, and the original turbo filter was manufactured using the component.
Although it is the comment with which it equipped, while the error of setting spreads (it was thin from the first.), it is only by attaching truly.
However, when fine setting of adjustment of a pilot screw, etc. was carried out, that it can blow going up in an unprecedented response and low rotation region was able to be obtained! This is the first time that the plug was burned in light brown! And the suction noise did not become large in particular.
It has inhaled to good touch.
If it says that it is satisfactory, that is right, but may not it be cheap to a slight degree ...

J

Turbo Filter Sheet

3 oleh Japan User(translated)

Pabrikan: DAYTONA

It was used for RG125gamma (NF13A).
Since it only cuts with scissors according to the size of pure filter sponge (it goes out comparatively simply.), in a minor vehicle without setting out of external parts, I am secure (^^) Compared with a pure filte

It was used for RG125gamma (NF13A).
Since it only cuts with scissors according to the size of pure filter sponge (it goes out comparatively simply.), in a minor vehicle without setting out of external parts, I am secure (^^) Compared with a pure filter, the eye of a sponge portion is coarse,
Since the suction noise is also large, I think whether there are some effects.
(I feel that that it can blow going up of rotation became good -- Although it is a grade which mind carries out w) Since it is dry type, maintenance is quite easy.
However, the original manufacturer's product of a price is quite cheaper, and it adds that it is [ which inhales garbage etc. ] also fear of insecurity, and that it is also few.

J

Turbo Filter Sheet

3 oleh Japan User(translated)

Pabrikan: DAYTONA

It decided not to be found, although it was disagreeable to have carried out the ska tune of FTR223 time-tested product and it was looking for the air cleaner suitable for normal EAKURI BOX, but to buy this product.
Wearing cuts off the contents of th

It decided not to be found, although it was disagreeable to have carried out the ska tune of FTR223 time-tested product and it was looking for the air cleaner suitable for normal EAKURI BOX, but to buy this product.
Wearing cuts off the contents of the normal air cleaner, and only cuts and (what is used is a half and ended) attaches a turbo filter according to a frame.
Since the muffler was exchanged with, carburetor setting was required.
(Kana ? which is not needed if it is muffler normal) It will become such evaluation if it is four * if it is goods which can carry out bolt-on without processing at this price, but time and effort is also considered.

J

Turbo Filter Sheet

3 oleh Japan User(translated)

Pabrikan: DAYTONA

Although it is bolt-on fundamentally, he exchanges main jets and issues setting.
In order to pull out the further Power -- on a turbo filter, a pure air cleaner is carried, and by magic, a form is drawn and inserted, and it comes out, and cuts the mar

Although it is bolt-on fundamentally, he exchanges main jets and issues setting.
In order to pull out the further Power -- on a turbo filter, a pure air cleaner is carried, and by magic, a form is drawn and inserted, and it comes out, and cuts the marks of magic.
It is better to cut greatly outside the marks of magic at this time.
Although it is itself's original way, please refer to it.

J

Turbo Filter Sheet

5 oleh Japan User(translated)

Pabrikan: DAYTONA

It adopted as an intake-air tune made cheaply.
Since it was processed freely, it cut off according to the pure size.
Since it is directive, at the time of processing and attachment, cautions are required.

It adopted as an intake-air tune made cheaply.
Since it was processed freely, it cut off according to the pure size.
Since it is directive, at the time of processing and attachment, cautions are required.