Kembali ke atas

【DAYTONA】Oil Stone

    • Penilaian:

It used for uniting at the time of the engine OH and accustoming a field.
Even if there was a stud bolt, it was easy-to-use.
I think that five stars were used when cheap to a slight degree.

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-08-03 17:20:58
It used for uniting at the time of the engine OH and accustoming a field.
Even if there was a stud bolt, it was easy-to-use.
I think that five stars were used when cheap to a slight degree.

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

J

Oil Stone

4 oleh Japan User(translated)

Pabrikan: DAYTONA

A size is also moderate and quite easy-to-use.
The oiler was purchased with two #220, and after polishing by #220, it is fin...

A size is also moderate and quite easy-to-use.
The oiler was purchased with two #220, and after polishing by #220, it is finished by #400.

J

Oil Stone

4 oleh Japan User(translated)

Pabrikan: DAYTONA

It used for uniting at the time of the engine OH and accustoming a field.
Even if there was a stud bolt, it was easy-to-use....

It used for uniting at the time of the engine OH and accustoming a field.
Even if there was a stud bolt, it was easy-to-use.
I think that five stars were used when cheap to a slight degree.

J

Oil Stone

4 oleh Japan User(translated)

Pabrikan: DAYTONA

[Monitor] It is used for the face-out display of the
Crankcase etc.
As it is distorted and the face-out display was co...

[Monitor] It is used for the face-out display of the
Crankcase etc.
As it is distorted and the face-out display was completed finely [ there is nothing and ], there is no
oil leakage the place which is Kon. if it is the face-out display at the time of the Engine decomposition about
Mini bike --
-- I think that this product is enough.

J

Oil Stone

4 oleh Japan User(translated)

Pabrikan: DAYTONA

They are necessaries at the Maintenance at the time of engine disassembly.Since what was still being used had decreased, it newl...

They are necessaries at the Maintenance at the time of engine disassembly.Since what was still being used had decreased, it newly purchased this time.In the face-out display of a field, and the face-out display of a Cylinder or a Cylinder-head side, it is found useful ruined with the removal and the Scraper of an old Gasket sticking to the Crankcase which it cannot finish taking with the
Scraper.

J

Oil Stone

4 oleh Japan User(translated)

Pabrikan: DAYTONA

Easy to use

I opened Clutch, so I used it for face-finishing later. I can not compare because I have never compared with others, but it was easier to use as it was easier to own as Size. Is the price a little expensive?
Oil stone thinks that it is essential item for those who intend to do the engine by oneself.

J

Oil Stone

4 oleh Japan User(translated)

Pabrikan: DAYTONA

DAYTONADAYTONA Oil stone

When NSR 250 EngineOH, Crankcase and Cylinderetc. Used for mating surfaces. At first I thought that Small was good, but I tried using it and it was easy to use with my own Large size.

J

Oil Stone

3 oleh Japan User(translated)

Pabrikan: DAYTONA

no problem

I bought it for face lapping of Clutch cover.
If the condition is not bad Motorcycle, number 400 is recommended.
If it is a daily Maintenance cycle Cycle, I think that if you purchase it once, you will not need to purchase twice as long as it will last long.
When storing, I think that if you keep it clean with Parts cleaner, the performance will last at the next work.

J

Oil Stone

5 oleh Japan User(translated)

Pabrikan: DAYTONA

Used when exchanging Clutch

I used it to arrange the Gasket side of the replacement of Clutch.
Smaller than I thought it was surprising, but for individuals this is enough.
Oil There are no leaks, etc., it can be used without problems.

J

Oil Stone

4 oleh Japan User(translated)

Pabrikan: DAYTONA

Case cylinder etc.


I bought the Oil stone of DAYTONA. It will be useful during maintenance such as taking BALI etc.. Large is exactly right. Crankcase etc. Before painting Seal agent I will lose irregularities and burrs etc. If you do not clean it will cause leaks later I think that it is convenient to arrange good tools

J

Oil Stone

5 oleh Japan User(translated)

Pabrikan: DAYTONA

For Bore up incorporation

I bought it myself even though my friend had the same item and I borrowed it over and over but indeed it w

Because I got the Engine burning GRAND AXIS, I thought that I will try to Bore up while repairing it

Although I was using it even at work, I can use it for quite a while if I buy it once, and 1 pc. There is no loss

Besides Engine, if it is a Scooter, you can use it even when Crankcase Cover's Gasket remains halfway
If you have full Pull Jet oiler together, put Oil in there and it is easy to use

J

Oil Stone

5 oleh Japan User(translated)

Pabrikan: DAYTONA

Items essential for Motorcycle tampering

Crankcase, Clutch cover, Cylinder, etc. There are lots of sides around the Engine that are sealed by Liquid Gasket. When maintaining such a part, Gasket does not work effectively unless you finish the mating face smoothly, it is the source of unexpected Trouble such as Oil leakage.
So, it is essential item for those who do Motioncycle messing with DIY. If it is for personal use, I think that it is unlikely that wear out and run out, and the price is reasonable so 1 pc. We Recommendation to have.

J

Oil Stone

4 oleh Japan User(translated)

Pabrikan: DAYTONA

I used it for the first time.

After installing Bore Up Kit on GORILLA, Gasket's processing leaked well Oil so I bought it. There is nothing special because it seems to use only Oil and rub it lightly. The surface became beautiful and it seemed not to leak because I saw it.

Although durability is used only once, it is essential observation, but if you use about personal impressions after about 5 times you will be able to step and it will not be usable.

I will buy it again when it becomes useless because this price. Do not do this Oil leaked and buy Gasket again and work again Because time and Gold will be in vain...

It was a good learning experience..

J

Oil Stone

4 oleh Japan User(translated)

Pabrikan: DAYTONA

Motorcycle Necessities of messing?

It is often said that it is necessity of Motorcycle tampering, but since I started riding Motorcycle 16 years ago, except for under the Engine waist, I messed around one thing, but I never used it.
I used this time, I understood the meaning of necessities.
I knew that turning on Wound rather than turning Oil well, it was a good learning experience.
There was also someone's impression, but certainly "For the whole lifetime" Maybe there is ... (Lol)

J

Oil Stone

5 oleh Japan User(translated)

Pabrikan: DAYTONA

It is a reliable Manufacturer

I bought it to take the Gasket attached when disassembling the Engine. I decided on this product because it is a reliable Manufacturer. The price is reasonable so I'm very satisfied..

J

Oil Stone

4 oleh Japan User(translated)

Pabrikan: DAYTONA

Gasket exchange etc etc. To

Oil from Head cover It is easy to see leakage
I use it to a degree that it gently scratches the replacement.
Motorcycle I think that one is a thing to be more sustainable. Point cover exchange, Genie Cover exchange etc etc etc. Even though it will be Gasket peeling off.
I think that the use feeling is not good or not bad
It is an ordinary Oil stone (Lol)

J

Oil Stone

4 oleh Japan User(translated)

Pabrikan: DAYTONA

Is ease of use dependent on usage?

My primary use is after milling with Milling Machine in our house (Using End mill) I bought it for the finishing of.
There was nothing to mill yet, so I took Maniblo (ManifoldBlock) Relations that work for Manufacturer, Manibro's Valve built inside the company (parts) I tried using it for the hand finishing of the mounting surface.
It is impossible to flatten rough surface roughness or deep scratches, but it can be used with a good feeling for the final finishing of the surface once finished.
Just for my use and Cylinder, Cylinder head etc of Engine Displacement Volume which is slightly Large, it seems easy to use Large people who are about two years old. It is a little Small so I will keep it four.

J

Oil Stone

5 oleh Japan User(translated)

Pabrikan: DAYTONA

For maintaining adhesion

In addition to Crankcase of Engine and others, I bought it to remove the old Gasket that adhered and stuck at the time of brand-new exchange of Gaskets due to desorption. Initially, we scraped the member surface roughly and used this finishing product. I am satisfied that it can cleanly remove the parts without hurting. If you do not do this process badly, the adhesion of the new Gasket will be worse, leakage, oil leak etc. I thought it would be the cause.

J

Oil Stone

5 oleh Japan User(translated)

Pabrikan: DAYTONA

Necessary items for engine decomposition

I bought it for Head Gasketfor Replacement etc.. I had an Oil stone that I use when disassembling the engine of a car, but the size is Large for single cylinder Engine. This product was just right Size so I purchase it and use it.



Metal head gasket requires a clean surface unlike paper Gasket. Compression leak if you do not do it well - - So I have to apply Oil to Oil stone and carefully clean up the surface and assemble it.



1 pc for face finish. , 1 pc for taking BALI. Quantity of : 2pc. I own the Set. When you brush the corner of Gold genus for taking BALI, the planes of Stone will soon become useless, so I use them properly.