Kembali ke atas

【ROUGH&ROAD】PWK Flat Valve Carburetor

    • Penilaian:

For an exclusive design, if it is a direction which can remove a pure carburetor, I think that exchange is easy.
However, he has been puzzled at the time of exchange of an axel wire.
Once, it is necessary to remove a normal wire thoroughly from an

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-07-13 18:33:49
For an exclusive design, if it is a direction which can remove a pure carburetor, I think that exchange is easy.
However, he has been puzzled at the time of exchange of an axel wire.
Once, it is necessary to remove a normal wire thoroughly from an axel holder.
Although it is setting, since MJ/SJ is attached supposing the normal chamber, a chamber exchange vehicle is useless as it is.
It is very well to investigate by oneself, since the description is written very simply.
The used touch was the touch which the response improved too and carried out all-over-the-districts torque up a little.
Although based also on how to ride, it hardly changed! It is recommended!!

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

J

PWK Flat Valve Carburetor

5 oleh Japan User(translated)

Pabrikan: ROUGH&ROAD

For an exclusive design, if it is a direction which can remove a pure carburetor, I think that exchange is easy.
However, he...

For an exclusive design, if it is a direction which can remove a pure carburetor, I think that exchange is easy.
However, he has been puzzled at the time of exchange of an axel wire.
Once, it is necessary to remove a normal wire thoroughly from an axel holder.
Although it is setting, since MJ/SJ is attached supposing the normal chamber, a chamber exchange vehicle is useless as it is.
It is very well to investigate by oneself, since the description is written very simply.
The used touch was the touch which the response improved too and carried out all-over-the-districts torque up a little.
Although based also on how to ride, it hardly changed! It is recommended!!

J

PWK Flat Valve Carburetor

5 oleh Japan User(translated)

Pabrikan: ROUGH&ROAD

It is a tune which can aim at power up most certainly.
CRM250Rr is equipped.
In addition, only the jet relation which us...

It is a tune which can aim at power up most certainly.
CRM250Rr is equipped.
In addition, only the jet relation which uses required parts for setting.
Torque up of after wearing is carried out all over the districts, and it pulls out the original engine performance of CRM.
It could be called the tune whose degree of satisfaction is quite high.

J

PWK Flat Valve Carburetor

3 oleh Japan User(translated)

Pabrikan: ROUGH&ROAD

In FMF chamber wearing, when not tampering with an intake system, it purchased by !.
Although the contents of goods were 1 s...

In FMF chamber wearing, when not tampering with an intake system, it purchased by !.
Although the contents of goods were 1 set for exchange and the axel wire of MJ and SJ, MJ at the time of chamber exchange and SJ were standard, and setting did not come out of them by the count with which the carburetor is equipped.
MJ changed #148 of a normal cab, and SJ into the jet for exchange.
In the normal state, the count right [ that ] and low which is setting at the time of a normal chamber was set.
Carburetor removal also needs power very well.
Moreover, if it does not attach to a manifold firmly at the time of attachment, since it becomes a secondary air suction -> rotation bad condition, cautions are required.
Moreover, since it is [ also fastening a manifold set screw too much ] useless, special attention is required.
Moreover, since it could not attach if not once removed from an axel root part, the axel wire had to be performed carefully.
Although it was a feeling, rotation could have been blown lightly.
Is a feeling of torque the grade which went up a little?
As mentioned above, I thought whether attachment would be severe when there is none of a certain amount of knowledge.
Since the effect was delicate considering the price, it is made it in three stars!

J

PWK Flat Valve Carburetor

5 oleh Japan User(translated)

Pabrikan: ROUGH&ROAD

It is a tune which can aim at power up most certainly.
CRM250Rr is equipped.
In addition, only the jet relation which uses required parts for setting.
Torque up of after wearing is carried out all over the districts, and it pulls out the origi

It is a tune which can aim at power up most certainly.
CRM250Rr is equipped.
In addition, only the jet relation which uses required parts for setting.
Torque up of after wearing is carried out all over the districts, and it pulls out the original engine performance of CRM.
It could be called the tune whose degree of satisfaction is quite high.

J

PWK Flat Valve Carburetor

3 oleh Japan User(translated)

Pabrikan: ROUGH&ROAD

In FMF chamber wearing, when not tampering with an intake system, it purchased by !.
Although the contents of goods were 1 set for exchange and the axel wire of MJ and SJ, MJ at the time of chamber exchange and SJ were standard, and setting did not co

In FMF chamber wearing, when not tampering with an intake system, it purchased by !.
Although the contents of goods were 1 set for exchange and the axel wire of MJ and SJ, MJ at the time of chamber exchange and SJ were standard, and setting did not come out of them by the count with which the carburetor is equipped.
MJ changed #148 of a normal cab, and SJ into the jet for exchange.
In the normal state, the count right [ that ] and low which is setting at the time of a normal chamber was set.
Carburetor removal also needs power very well.
Moreover, if it does not attach to a manifold firmly at the time of attachment, since it becomes a secondary air suction -> rotation bad condition, cautions are required.
Moreover, since it is [ also fastening a manifold set screw too much ] useless, special attention is required.
Moreover, since it could not attach if not once removed from an axel root part, the axel wire had to be performed carefully.
Although it was a feeling, rotation could have been blown lightly.
Is a feeling of torque the grade which went up a little?
As mentioned above, I thought whether attachment would be severe when there is none of a certain amount of knowledge.
Since the effect was delicate considering the price, it is made it in three stars!