Kembali ke atas

【J Trip】Cantilever Roller Stand (Main Body Only)

    • Penilaian:

In order to carry out maintenance of RVF, the stand was looked for, but there are no other things with a roller by cantilever swing arm correspondence, and they purchased the stand of J trip.
If it actually uses, even when an assembly (a roller and a

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-06-08 18:51:40
In order to carry out maintenance of RVF, the stand was looked for, but there are no other things with a roller by cantilever swing arm correspondence, and they purchased the stand of J trip.
If it actually uses, even when an assembly (a roller and a shaft) is also simple and has no description, it can do simply.
Moreover, since it says with a roller, one person can also use a stand.
Since the shaft also serves as an option, when a motorcycle is changed, he does not need to rebuy a stand and I regard it as cost performance being quite high (only in case of cantilever arm adoption vehicle).

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

J

Cantilever Roller Stand (Main Body Only)

5 oleh Japan User(translated)

Pabrikan: J Trip

In order to carry out maintenance of RVF, the stand was looked for, but there are no other things with a roller by cantilever sw...

In order to carry out maintenance of RVF, the stand was looked for, but there are no other things with a roller by cantilever swing arm correspondence, and they purchased the stand of J trip.
If it actually uses, even when an assembly (a roller and a shaft) is also simple and has no description, it can do simply.
Moreover, since it says with a roller, one person can also use a stand.
Since the shaft also serves as an option, when a motorcycle is changed, he does not need to rebuy a stand and I regard it as cost performance being quite high (only in case of cantilever arm adoption vehicle).

J

Cantilever Roller Stand (Main Body Only)

5 oleh Japan User(translated)

Pabrikan: J Trip

It purchased to DUCATI 1098.
Using this, attachment (JT-135C) and a shaft (JT-135A) are needed for others.
At a little t...

It purchased to DUCATI 1098.
Using this, attachment (JT-135C) and a shaft (JT-135A) are needed for others.
At a little time of lift up, although power is needed, it can do in one person.
Of course, there is no totter and it is stable.
Since the J trip is a top maker of stand products, structure is also solid.
It is recommended.

J

Cantilever Roller Stand (Main Body Only)

5 oleh Japan User(translated)

Pabrikan: J Trip

the maintenance stands which he wanted from beforehand -- he bought it and it was a correct answer! it seems that it works by tw...

the maintenance stands which he wanted from beforehand -- he bought it and it was a correct answer! it seems that it works by two persons fundamentally -- although written, also when raising to the extent that one must be careful for a while, when taking down a motorcycle and taking down, it can do easily alone.
Since the price (smile) to which chain cleaning, adjustment, etc. which were troublesome until now became pleasant by the favor of this stand is not so high, they are a direction to work firmly and a direction recommend which wants to shorten working hours!

J

Cantilever Roller Stand (Main Body Only)

4 oleh Japan User(translated)

Pabrikan: J Trip

It purchased to DUCATI 1098.
Since the stand was required in order to have fixed the motorcycle, this manufacturer was purch...

It purchased to DUCATI 1098.
Since the stand was required in order to have fixed the motorcycle, this manufacturer was purchased.
Since structure is solid, the lift of the motorcycle can be carried out in comfort.
It is very good simply as a homepage to be able to carry out a lift, without feeling the heaviness of a motorcycle.

J

Cantilever Roller Stand (Main Body Only)

5 oleh Japan User(translated)

Pabrikan: J Trip

Since favorite horse was a cantilever, as a result of examining a price etc. variously, it decided! Compared with a cheap stand,...

Since favorite horse was a cantilever, as a result of examining a price etc. variously, it decided! Compared with a cheap stand, it is completely solid, and it is not twisted at the time of lift up, or does not carry out at all! It is super-recommendation!

J

Cantilever Roller Stand (Main Body Only)

4 oleh Japan User(translated)

Pabrikan: J Trip

A vehicle type is the ducati monster S4R.
The attachment for ducatis does not have GATA in a rear wheel shaft by exactly, ei...

A vehicle type is the ducati monster S4R.
The attachment for ducatis does not have GATA in a rear wheel shaft by exactly, either.
Lift up and a down were able to leave it alone simply (a motorcycle is toppled at first and it meets if it gets used although it came out and was uneasy easy YO)! Red also does cool and maintenance becomes pleasant.

J

Cantilever Roller Stand (Main Body Only)

5 oleh Japan User(translated)

Pabrikan: J Trip

It purchased to DUCATI 1098S.
As it is also in Mr. J-TRIP's HP to like to be careful, 1098 is the point that there are a fir...

It purchased to DUCATI 1098S.
As it is also in Mr. J-TRIP's HP to like to be careful, 1098 is the point that there are a first half type and a second-half type, and the shaft purchased, respectively also becomes another product.
Since I was not dealing with the shaft for second-half types by Mr. Webike when it purchased, it prepared independently.
Although it is the used comment, it is satisfactory, even if rigidity and reinforcement are solid and it straddles vehicles into lift up.
The red color matches the vehicles of Ducati and is a very (they are us and black.) satisfying product.
This is a recommend if it is cantilever maintenance stands.

J

Cantilever Roller Stand (Main Body Only)

4 oleh Japan User(translated)

Pabrikan: J Trip

There is no problem and it can use it.
Structure of each part is polite, and considering a price, it is inexpensive.
How...

There is no problem and it can use it.
Structure of each part is polite, and considering a price, it is inexpensive.
However, unlike the stand of FG, etc., it is just going to have only a short type in a lineup to feel that I want one point for there to be like this.
Although a short type is convenient for the case where it is used by a transporter, and use in narrow space, if it is a long type back long to a slight degree, it is stabilized and lift up is possible by light power.
When raising a motorcycle with a guide peg, in a situation which helpers raise also with this die length only by hand in a circuit etc. although it is satisfactory, it is a ruling at the user-friendliness of FG.
Since it may be expensive to a slight degree, I also regard a long type as my wanting you to add to a lineup.

J

Cantilever Roller Stand (Main Body Only)

4 oleh Japan User(translated)

Pabrikan: J Trip

They are necessaries at the maintenance of a motorcycle only with side stands.
A weight balance when it has a handle, the st...

They are necessaries at the maintenance of a motorcycle only with side stands.
A weight balance when it has a handle, the state of finishing, etc. are perfect.

J

Cantilever Roller Stand (Main Body Only)

5 oleh Japan User(translated)

Pabrikan: J Trip

It is the structure in which the price became brave comparatively.
It does not become obstructive also when using it by a tr...

It is the structure in which the price became brave comparatively.
It does not become obstructive also when using it by a transporter, since it is short.
raising -- one person is also easy if the rear tire has been pulled.
They are recommended goods.

J

Cantilever Roller Stand (Main Body Only)

5 oleh Japan User(translated)

Pabrikan: J Trip

In order to use it for S2R of DUCATI, cantilever stand shaft JT-135B of the company was purchased simultaneously.
In a user ...

In order to use it for S2R of DUCATI, cantilever stand shaft JT-135B of the company was purchased simultaneously.
In a user friendly manner [ it is very lightweight and ], since it was compact, it was able to install without what also at the narrow place.
A motion of a bearing is also very smooth and maintenance of a tire wheel chain, etc. are very much apt to carry out it.
A price is also reasonable and very satisfactory.

J

Cantilever Roller Stand (Main Body Only)

3 oleh Japan User(translated)

Pabrikan: J Trip

It purchased after triumph purchase for chain maintenance.
This was impossible although the usual hook type was able to carr...

It purchased after triumph purchase for chain maintenance.
This was impossible although the usual hook type was able to carry out the lift alone.
Since it is a level which will be made if a front is raised previously since it also has the front stand, it is not a problem, but it is common.
Since the bearing of the shaft part turned those with a rigid feeling, and a wheel lightly, the purpose has been achieved.

J

Cantilever Roller Stand (Main Body Only)

4 oleh Japan User(translated)

Pabrikan: J Trip

It is facility without a complaint.
Once it uses for maintenance or a car wash, it becomes impossible to already part with i...

It is facility without a complaint.
Once it uses for maintenance or a car wash, it becomes impossible to already part with it.
If only one difficulty is raised, since a center shaft becomes an option the whole vehicle type although it is unavoidable, a feeling of a comparatively high price is Tokoro who comes out a little.
Although the point is deducted and it is four stars, it is a five stars if it is only user-friendliness.

J

Cantilever Roller Stand (Main Body Only)

4 oleh Japan User(translated)

Pabrikan: J Trip

It is M796.
Since it was simply stylish, it purchased.
if it is actually used -- for the first time -- also coming out -...

It is M796.
Since it was simply stylish, it purchased.
if it is actually used -- for the first time -- also coming out -- it was able to start ordinarily alone.
However, since weight is put, stepped on and taken down to a guide peg, it sounds [ splendid ] KATSUN at the time of contact with a ground surface (concrete).
(He got the jitters in the beginning) Since paint application has separated in the 1st KATSUN, contacting parts consider that it is better to recuperate oneself with masking tape etc.
In that, evaluation is *4.

J

Cantilever Roller Stand (Main Body Only)

5 oleh Japan User(translated)

Pabrikan: J Trip

Since the usual maintenance stands had, it was hesitating purchase, but since it was required for RVF, it purchased.
If ther...

Since the usual maintenance stands had, it was hesitating purchase, but since it was required for RVF, it purchased.
If there is nothing when it is after all, is it completely different?
Serviceability is completely different.
Moreover, since it is supportable firmly, it is satisfied.
It is so easy that a child can also do lift up.
Are they necessaries at Mr. Owner of a cantilever motorcycle?
Since a price is also cheap, it is recommended.

J

Cantilever Roller Stand (Main Body Only)

3 oleh Japan User(translated)

Pabrikan: J Trip

Since the price was also handy, it purchased to RVF400.
honest -- it was [ lift-up-] hard to make it very hard to use whethe...

Since the price was also handy, it purchased to RVF400.
honest -- it was [ lift-up-] hard to make it very hard to use whether it was the defective unit which I obtained. [ it ]
Since the same thing of the friend who was able to take as the portion of the resin inserted at the end used was used in a good mood, my thing would only be a defective unit, but since the cowl broke now, it is this evaluation.

J

Cantilever Roller Stand (Main Body Only)

4 oleh Japan User(translated)

Pabrikan: J Trip

Since Ducati748 and NSR (managing contractor28) were shared by exchange of the shaft, it was made Colet.
It uses at the time...

Since Ducati748 and NSR (managing contractor28) were shared by exchange of the shaft, it was made Colet.
It uses at the time of a car wash, brake chain maintenance, and a tire change.
Probably, it will be better for there to be snap ring pliers in it, since it is necessary to desorb an E ring for extraction and insertion of a shaft.
The price is only 1000 yen in a tool store.
There is structure as it is scrupulous by a special manufacturer truly, and welding and paint application are solid.
Although it raises with the product of the other company on a step pedal and the spot and there is also a thing like a system, it becomes expensive and Colet is enough for himself. [ of a sunday mechanic ]

J

Cantilever Roller Stand (Main Body Only)

4 oleh Japan User(translated)

Pabrikan: J Trip

"It is used for DUCATI Monster. Since it was cantilever, there was uneasiness but I was surprised at thw sense of stability. Alt...

"It is used for DUCATI Monster. Since it was cantilever, there was uneasiness but I was surprised at thw sense of stability. Although I was worried if I could do alone at first, when I do UP, DOWN no less than 5 times, I feel that I had a sense. It is a little regrettable that a setting face touches a ground surface and special red paint application is separating. It may be better to attach some cushion parts."

J

Cantilever Roller Stand (Main Body Only)

4 oleh Japan User(translated)

Pabrikan: J Trip

Since the SPEED TRIPLE was the first cantilever Swing-arm vehicle, it is tire replacement. It purchased to the Maintenance. <...

Since the SPEED TRIPLE was the first cantilever Swing-arm vehicle, it is tire replacement. It purchased to the Maintenance. < -- it br(ed) > arrived, and since the price of structure was also well handy when looked at, it was good.
The used touch has worked having felt easy also about user-friendliness well. It is considered that the object for
Fronts will also purchase J Trip company make.