Kembali ke atas

【DAYTONA】Radiator Shroud

    • Penilaian:

Since the water thermometer does not stick, it does not understand as a numerical value, but I think that it is effective.
Especially, immediately after the time of high speed operation, if it was usually, smoke was raised with some heat, but the phen

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-06-01 17:44:34
Since the water thermometer does not stick, it does not understand as a numerical value, but I think that it is effective.
Especially, immediately after the time of high speed operation, if it was usually, smoke was raised with some heat, but the phenomenon was lost.
It seems that water temperature is lowered certainly.
If it is a normal boa, I think or enough now.

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

J

Radiator Shroud

4 oleh Japan User(translated)

Pabrikan: DAYTONA

Since the water thermometer does not stick, it does not understand as a numerical value, but I think that it is effective.
E...

Since the water thermometer does not stick, it does not understand as a numerical value, but I think that it is effective.
Especially, immediately after the time of high speed operation, if it was usually, smoke was raised with some heat, but the phenomenon was lost.
It seems that water temperature is lowered certainly.
If it is a normal boa, I think or enough now.

J

Radiator Shroud

5 oleh Japan User(translated)

Pabrikan: DAYTONA

Although this product was attached to NSR50 and water temperature became Minus 10 ℃, Since it attached simultaneously with the ...

Although this product was attached to NSR50 and water temperature became Minus 10 ℃, Since it attached simultaneously with the
Radiator cap, is the effect of a Shroud only Minus 5℃?!
? A clear effect is seen although there is that whose
> air temperature was also a little low.

However, I wanted you to have taken and to attach at least an opinion (the wearing method) ... Pains were taken to look for the
> mounting arrangement on an Internet. Also in
>, COSPAR is the highest!!

J

Radiator Shroud

5 oleh Japan User(translated)

Pabrikan: DAYTONA

The delivery date of also ending with an order placement is one month about a set for NSRmini of HRC of Radiators. It purchased...

The delivery date of also ending with an order placement is one month about a set for NSRmini of HRC of Radiators. It purchased like a makeshift in the meantime. I think that it can be easily judged how it fixes to a pure Radiator if the attachment itself is bent along a dotted line (mountain Oritani chip box). Although expectation was not carried out with delicate construction material, this cools down beyond anticipation! Water temperature fell during the run about 5~10 ℃ of this time, and it has saved 65~70 ℃ except the waiting for a signal. It is not a Level which interference with a Front fork also worries thanks to soft construction material. Isn't there any turn till the Radiator of NSRmini, and an intensely hot day!?

J

Radiator Shroud

3 oleh Japan User(translated)

Pabrikan: DAYTONA

Expecting cooling efficiency Up

Since the Radiator of NS-1 is obviously small as it is different from other models, I was worried about whether Large is durable like this, so I tried putting expectations on efficiency by Shroud
I have only tested on the premises so I think I will see the situation well again at a later date

J

Radiator Shroud

5 oleh Japan User(translated)

Pabrikan: DAYTONA

Radiator Shroud

The water temperature reached Minus 7 ° C when attached to the NSR 50.

I was a little worried about the installation method,

It was a very good shopping experience..

It is unknown whether to meet different things!

J

Radiator Shroud

3 oleh Japan User(translated)

Pabrikan: DAYTONA

Used in NS-1 OEM Radiator

I bought it for the time being for water temperature management when I bore up NS - 1.
I think that it is easy to buy it because the price is cheap.

I could not think that there was such a change that I could feel so much in urban area driving - - -. In an environment where the wind always hits like Circuit, it may show its performance.

I changed to TZr50R Radiator after all.

J

Radiator Shroud

3 oleh Japan User(translated)

Pabrikan: DAYTONA

Used in NS-1 OEM Radiator

I bought it for the time being for water temperature management when I bore up NS - 1.
I think that it is easy to buy it because the price is cheap.

I could not think that there was such a change that I could feel so much in urban area driving - - -. In an environment where the wind always hits like Circuit, it may show its performance.

I changed to TZr50R Radiator after all.

J

Radiator Shroud

5 oleh Japan User(translated)

Pabrikan: DAYTONA

Radiator Shroud

The water temperature reached Minus 7 ° C when attached to the NSR 50.

I was a little worried about the installation method,

It was a very good shopping experience..

It is unknown whether to meet different things!

J

Radiator Shroud

3 oleh Japan User(translated)

Pabrikan: DAYTONA

Expecting cooling efficiency Up

Since the Radiator of NS-1 is obviously small as it is different from other models, I was worried about whether Large is durable like this, so I tried putting expectations on efficiency by Shroud
I have only tested on the premises so I think I will see the situation well again at a later date

J

Radiator Shroud

5 oleh Japan User(translated)

Pabrikan: DAYTONA

The delivery date of also ending with an order placement is one month about a set for NSRmini of HRC of Radiators. It purchased like a makeshift in the meantime. I think that it can be easily judged how it fixes to a pure Radiator if the attachment itse

The delivery date of also ending with an order placement is one month about a set for NSRmini of HRC of Radiators. It purchased like a makeshift in the meantime. I think that it can be easily judged how it fixes to a pure Radiator if the attachment itself is bent along a dotted line (mountain Oritani chip box). Although expectation was not carried out with delicate construction material, this cools down beyond anticipation! Water temperature fell during the run about 5~10 ℃ of this time, and it has saved 65~70 ℃ except the waiting for a signal. It is not a Level which interference with a Front fork also worries thanks to soft construction material. Isn't there any turn till the Radiator of NSRmini, and an intensely hot day!?

J

Radiator Shroud

5 oleh Japan User(translated)

Pabrikan: DAYTONA

Although this product was attached to NSR50 and water temperature became Minus 10 ℃, Since it attached simultaneously with the
Radiator cap, is the effect of a Shroud only Minus 5℃?!
? A clear effect is seen although there is that whose
>

Although this product was attached to NSR50 and water temperature became Minus 10 ℃, Since it attached simultaneously with the
Radiator cap, is the effect of a Shroud only Minus 5℃?!
? A clear effect is seen although there is that whose
> air temperature was also a little low.

However, I wanted you to have taken and to attach at least an opinion (the wearing method) ... Pains were taken to look for the
> mounting arrangement on an Internet. Also in
>, COSPAR is the highest!!