Kembali ke atas

【PRO GRIP】Vintage Grip with Vibration-Proof Gel #842 (for Φ22.2 Handle)

    • Penilaian:

It stuck to CD125T of HONDA.
Appearance is also good and it becomes difficult to get tired.
It is good for a motorcycle with much vibration.

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-05-11 17:32:37
It stuck to CD125T of HONDA.
Appearance is also good and it becomes difficult to get tired.
It is good for a motorcycle with much vibration.

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

I think that vibration is reduced by a thicker grip.
It has merely worn out within half a year.
Although durability is anxious, probably, a grip is OK with consumable goods.

It stuck to CD125T of HONDA.
Appearance is also good and it becomes difficult to get tired.
It is good for a motorcycle with much vibration.

Since aged deterioration etc. have a grip of CD50 and it was becoming touch that it was hard and there was a vine vine [ the surface ], it exchanges.
Since especially handle change etc. were considered and it was not, in search of the thing of the type which the end has not penetrated, it became this product.
However, since it was regarded as the kana ? which should just move a switch box at first since the grip of CD50 was shorter than the usual thing, but it was not able to shift the inner by the side of an axel, it was cut and processed and equipped with it.
A using feeling does not have a thing [ a thing ] in particular it cannot compare since the front thing was severe, but it slides, either, and is very much good touch.

It attached to us W650.
Although the hand was lifted whenever the hand could be numbed and it stopped at the signal, when I had ridden for a long time, and it was able to rest, when it was this grip, it became quite easy about whether you suppress vibration considerably.
I am [ like a vintage ] glad to suit W650.
Merit that's right since it was likely to take immediately although the cover of the plastic was attached to the end part, direction it attached with the bond.
The price could also be handy.

It attached simultaneously on the occasion of handle exchange of SR400.
When the grip authentic positive in SR was hard and having been got on for a long time, the hand was numbed, but the numbness of the end was lost after changing into this grip.
It seems that it sticks to a hand, without sliding although the touch near a sponge grip carried out grasped touch.
A fault is a place where return of a wrist becoming large for gel built-in since the some grip's is thick, and the plastic plating made to look like bar end are cheap.
They are five stars even if it deducts it.

250TR is equipped.
A size is perfect for.
A using feeling is also good, and if it turns, TR out of which an appropriate vibration comes may be sufficient, and it will absorb.
However, although others are also written, the circular plastic plate of a grip end part is cheap, and since it can take immediately, we recommend you fixation with a bond.
Moreover, returning is fairly serious, once it is straightly ! twisted so that it may never twist when inserting in a handlebar --

Although an original manufacturer's product is durable and could meet, since it was a little thin in my hand, it purchased in it.
Although reuse of the original manufacturer's product was planned and removal was started, the adhesive bond is firmly used for the left hand side, and it cut with the cutter reluctantly.
This thickness is not grasping a grip by the power more than needed, and using, came to be Satoru Taisho and to be able to perform handle operation which extracted the power of the shoulder.
Can't fatigue at the time of long touring be reduced conjointly with earthquake-proof?
Since it is a soft raw material, it is businesslike with consumable goods and does not expect durability.
The plastic of grip end is merely lost unawares, and the thing currently attached to the bar tape for road motorcycles (bicycle) was processed and attached.

It exchanged from it being pure (waffle).
Although it is said that it is gel built-in, especially even if it touches for earthquake-proof, it does not understand the feel of a gel.
I think that surely vibration decreased for a while.
I think that it becomes a grip of eye Futoshi just for a moment.
I think that a feel is the comparatively softer one.
It seems to have been hard to carry out clearing work, because it was thick.
It is easy to have and pleasing by the design without a strange opinion.
Since what [ like / a thing / a coin ] of plating of bar end is in the state which is not pasted up from the beginning but can be easily taken with a finger, we recommend you adhesion.

It was used for the dragstar classic which had ridden before.
It purchased, as soon as it changed and cooked the grip.
Although the grip of an american type has metal things, the direction which suffers troubles coldly is also in winter, and the one poorer at such things recommends you the product made of a rubber.
A price is also markedly cheap (I think that the motorcycle of American one or a vintage system is also suited since a smile design is also simple.).
And since plating parts are embedded into the portion, it is an accent good also for appearance.
The high speed cruise etc. became comfortable also with sufficient connection in the palm as which important earthquake resistance was felt enough uniformly about the throttle.

I am using it for W650 of KAWASAKI.
looks and a feel -- it is perfect -- it is .
If only one dissatisfaction point is got, the cover with which the plastic of the silver currently attached to grip end was plated will be mentioned.
Although only inserted in the grip, shortly after this grasps near grip end with GYUTSU, this cover will separate from it.
Even if it removes a cover, looks are not good, if it uses removing since a cover is attached although penetration is not carried out and it has become depressed.
It is a dissatisfaction point although it is right.
I think that it will purchase immediately if this grip is put on the market by a version without this plating cover!!

Although he imagined and bought the grip which it is soft and is carrying out pull pull awfully by a gel earthquake-proof, it was a slightly softer grip.
The feel of a gel is hardly known.
It was slightly regrettable.
But when used and seen, it was good for except.
Since it was a slightly thicker grip, there was sense of security, and since it was comparatively soft, that a hand is attached by vibration also decreased.

It attached to GB250 of a friend.
Although we have also attached to GB250, I think that a feel is also good and vibration is also reduced to be sure.
Wear is only half a year even free ..
Since grips are consumable goods although durability may be ?? ...

It is exchange from the PIRO type of a pro taper. Since vibration was a little worrisome, I equipped. It was not changeful although it has an earthquake-proof gel. It was not suited for an off vehicle, although it is subjectivity... It is slightly thick and I have sense of incongruity for me. I think that it will be a grip to choose the machine to equip.

Since he had a thin and hard feeling, the NORMAL was changed! >

[Webike Monitor] Since vibration of a Handle is uncanny, if it operates, the hand of

SR will be palsied for a long time. Since the
> winter season was using the Hot grip of the DAYTONA, it was eased, but since
spring came and Handles were also exchanged, the Grip also used oscillating adjusted parts. The
> effect is immediate! The feel which the numbness of a hand does not have, either and was touched is also GOOD. A NORMAL may not penetrate the
> end, either.

I was satisfied though it was attached to sr400FI!
Although it is somewhat more than the OEM, the vibration has also been alleviated.
Although it is Gel, it is not too soft and I like it very much.
I think that end plating parts are also Accent and the whole looks tightened.
For the time being, Grip.

Especially because I did not ask for earthquake resistance, I liked Pro grip products
I made a choice..
There is no soft feeling of Gel. It is just fine to attach.
Pro grip itself is not bad because of Large, but it is hard to say that.

There is a story that Silver color part is off, but since I am using Penetrating
There is not it. (Naturally?)

Performance is also good, but the special mention is also high in Grip power and abrasion resistance.
It's an exquisite grip without slipping and sticking, and wear is also very few.
It's pretty good..
I have to be careful "Mold" is. There is no anti-Mold property etc. Shiitome
It is suitable for Motorcycle which leaves for a long time with Cover on No Maintenance
not.

Especially because I did not ask for earthquake resistance, I liked Pro grip products
I made a choice..
There is no soft feeling of Gel. It is just fine to attach.
Pro grip itself is not bad because of Large, but it is hard to say that.

There is a story that Silver color part is off, but since I am using Penetrating
There is not it. (Naturally?)

Performance is also good, but the special mention is also high in Grip power and abrasion resistance.
It's an exquisite grip without slipping and sticking, and wear is also very few.
It's pretty good..
I have to be careful "Mold" is. There is no anti-Mold property etc. Shiitome
It is suitable for Motorcycle which leaves for a long time with Cover on No Maintenance
not.

I was satisfied though it was attached to sr400FI!
Although it is somewhat more than the OEM, the vibration has also been alleviated.
Although it is Gel, it is not too soft and I like it very much.
I think that end plating parts are also Accent and the whole looks tightened.
For the time being, Grip.

Since he had a thin and hard feeling, the NORMAL was changed! >