Kembali ke atas

【KIJIMA】Soft LED Short Rubber

    • Penilaian:

It purchased simultaneously with a clear tail lens.
This is attached to the outside of a lens although he mistook at first with what is attached inside a lens.
I have that in mind and consider that it is better to cut a cord to some extent.
Si

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-04-27 18:49:28
It purchased simultaneously with a clear tail lens.
This is attached to the outside of a lens although he mistook at first with what is attached inside a lens.
I have that in mind and consider that it is better to cut a cord to some extent.
Since a cord is quite long.

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

Since it could be preeminent for * brightness which he wanted to use for the number LGT of yamaha YZF-R6 made into the fender-less by itself, and was purchased, wanted the moderate thing, but.
when delivered goods were attached, exactly good brightness has been secured! 笙ェ which it fits changing into the tail part of M character of R6 firmly as description of item, and is large satisfaction -- too thin wiring common to cheap LED goods -- not but,
Durable wiring is extended, and even after also attaching attachment, there is no uneasiness and it is using it.
It is this remarkable recommendation!!!

It purchased simultaneously with a clear tail lens.
This is attached to the outside of a lens although he mistook at first with what is attached inside a lens.
I have that in mind and consider that it is better to cut a cord to some extent.
Since a cord is quite long.

It uses for vehicle types it is fairly bright and smallish and various.
Since a price is also cheap, it is recommendation.

It purchased for rear-fender-less-izing of WR250X.
Sticking on a curved surface is also possible and brightness is also enough.
It is also special mention that it is water proof.
The size which is not conspicuous is the best.

It is the highest for using as a number LGT.
Since it is soft as the name of a rubber type, a curved surface is stuck.
It is likely to use and some Ho is likely to find many things useful.
Since it is thin and small, it is not conspicuous, and although it can attach, there is, so that it passes over brightness enough.
Since the circumference of a tail is felt refreshed This small thin LED was good exactly.

When the tail lens of the address V125G was clear-ized, it purchased simultaneously with the red bulb for tails.
It stuck so that a license plate might not be displayed red, but since the red of a stop-lamp wears, the sheet of aluminum has been stretched on the tail lens bottom.

It used in order to make Number lighting of ZEPHYR chi white. Since

and ZEPHYR chi are using the light of a Tail (Brake) Lamp as Number light If pure, it is an ordinary electric lamp color., The quantity of light will change by
- and Brake ON/OFF.

Since he did not so like the two above-mentioned points, a Tail ball was not set to LED but Number light was extended.
quantity of light is enough and a luminescence color is also white !!. In order that the point even with regrettable

may waterproof LED, a thing like a translucent Silicon is used on LED, but this grows yellow under the influence of ultraviolet rays or dirt. Even if it considers all fields, such as
, however a Cost performance, they are goods which we can recommend to you.

Before knowing, it had stopped lighting up, although purchased for Fender-less-izing of WR250R.

Although the same thing was attached again, it became impossible to also use it in one week. a life is too brief although it is

LED -- ! -- I hope that you do not use this product with 2 times.

It had to write to the Fender less by its original work, Number light had to be installed separately, and this product was used.
Since a main part had pliability dramatically first, it was able to stick satisfactorily also on the aspect of affairs.
luminescence was also bright and was a beautiful color. I think that the
Cost performance is also high. It is
recommendation.

Although a thing like exclusive use is written to explanation, it can use for it being general-purpose natural, carrying out.Although width is 63 mm, the portion of only the Rubber of an end is cut off with a grinding sound, and it is made to 60 mm or less.The Short fender was used by its original work, and, in my case, the Number light Stay was made on one's own, and also by such a case, since the main part itself is light, I think that flexibility is high.I think that brightness is not necessarily too so bright as it is unnecessary as Number light, either, and is moderate, and visibility is also good.Since the whole
is wrapped in the Rubber, he has no dissatisfaction also to waterproofness.Since the Connector of
attachment was not able to be used for a thinner line, that on hand was substituted.I think that he is kind well as it is attached.

[Webike Monitor] Although Z1000 Seat cowl for
KSR110 was due to be equipped, they were the goods as an Image.

Since it is compact, it attaches, a place is not chosen and it is not necessary to break down a Style, I think that it is good.

Although these goods were purchased by the Number light move, they were goods whose form and brightness are very satisfying.

I installed it for Fender Eliminator.
I checked the lights on the installation without any problem, I ran a little bit, I ran Engine on the next weekend, 2 lights out of 4 lights. I also discarded Package and Instruction Manual and processed Wiring, so I contacted Wye Big with original bugs and I got it replaced.
After that, what has been replaced has passed a few months or there is no problem.

Although I was satisfied with Fit to Curve at the time of installation, I felt satisfied with Curve, but after about two years from installation, the LED's Clear cover was out of UV degradation or white turbid.

It keeps the vehicle on the covered Terrace, but maybe it may be due to the day being hit around Rear.

Although it is not that the direct date has been hit, it is honest disappointment. I replaced it, but purchased a product that is not the same item.

It seems that deterioration is quick except besides it is a flexible resin.

Although I was satisfied with Fit to Curve at the time of installation, I felt satisfied with Curve, but after about two years from installation, the LED's Clear cover was out of UV degradation or white turbid.

It keeps the vehicle on the covered Terrace, but maybe it may be due to the day being hit around Rear.

Although it is not that the direct date has been hit, it is honest disappointment. I replaced it, but purchased a product that is not the same item.

It seems that deterioration is quick except besides it is a flexible resin.

I installed it for Fender Eliminator.
I checked the lights on the installation without any problem, I ran a little bit, I ran Engine on the next weekend, 2 lights out of 4 lights. I also discarded Package and Instruction Manual and processed Wiring, so I contacted Wye Big with original bugs and I got it replaced.
After that, what has been replaced has passed a few months or there is no problem.

Although these goods were purchased by the Number light move, they were goods whose form and brightness are very satisfying.

Since it is compact, it attaches, a place is not chosen and it is not necessary to break down a Style, I think that it is good.

[Webike Monitor] Although Z1000 Seat cowl for
KSR110 was due to be equipped, they were the goods as an Image.