Kembali ke atas

【KIJIMA】Power Filter Air Drum

    • Penilaian:

Also in the power filter with a cover, the individual design was pleasing and purchased.
Attachment suffers troubles considerably.
Although attached to a pure intake pipe, the portion of opening of an intake pipe interferes and it does not enter w

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-04-27 18:50:06
Also in the power filter with a cover, the individual design was pleasing and purchased.
Attachment suffers troubles considerably.
Although attached to a pure intake pipe, the portion of opening of an intake pipe interferes and it does not enter well.
Then, although it cut off and equipped with the interference part, it was difficult to fix firmly shortly.
Moreover, the management of a tube which circulates blowby gas is difficult, and the tube has jutted out of a car body.
Although it was written to the description that a main jet attached No. 100 [ 95 to ] at the time of No. 90 and external muffler wearing, the place which is in practice at the external muffler wearing time, and was called No. 85 [ 82 to ] was the most in good condition.

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

It is attachment to a ZOOMER. If a Breather-hose push-in Pipe is turned as

description right above, a Drum main part will become downward strangely. Since he wanted to attach horizontally, he makes the hole for Breathers in the position which is not conspicuous, and did the difference of the resin Cheese of repair attachment directly. Since the Stay for the
Normal fenders is not pleasing, either, it is making on one's own.

Easy in it being unexpected, when it does, although it was first MJ exchange. Does it say? It is not difficult work but troublesome work.
Although it can be running ordinarily for the time being by No. 85, since it is late delicately from exhaust air Drum attachment before in my case, it is a Setting required.
> sound becomes large. since he is not young any longer -- the crossing in front of a station -- it is slightly shameful. However, if even full admission is not used by a slow start, it seldom changes that it is pure. Although it is the thing purchased to the sake although he wanted to attach a

external Rear suspension, appearance is very well pleasing.

since the drive-line and the exhaust steam system were changed -- this opportunity -- it considered and purchased.
attachment -- being such -- being alike -- it is not difficult.
However, since it cannot equip unless it processes a pure intake pipe, it is thrilling at the point.
Although equipped and run, it does not change visibly to there.
To the extent that a suction noise becomes large was felt.
When leaning even the day of worried rain downward somewhat, the day, it has run.

after exchanging mufflers -- an intake-air system -- it came out custom and purchased here.
The price was also handy, and since the form of the exhaust air drum was also pleasing, although appearance was good, unless it processed it into the injection pipe a little too on the occasion of attachment, an exhaust air drum was not able to equip with it well.
In addition, in the case of, the filter of the smaller one could sometimes be taken after attachment several times.
Although the exhaust air drum of a design is also good, the place where a crack tends to attach it is a difficulty.
The attachment description was intelligible.
Since it felt, it is satisfied with external muffler + intake-air KASUTAMU of the engine performance.

this is an awesome modification and makes a massive difference in performance over stock air cleaner setups. it looks good and makes good induction noises

looks good weighs nothing compared to stock air filter setup adds induction noise and is easy to service a must if you are looking to upgrade