Kembali ke atas

【DAYTONA】Vintage Headlight

    • Penilaian:

Shape is my favorite

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2016-10-11 22:35:42
Wiring got puzzled as Small hole in the mounting part became Small. I am glad that I did not have to process such as increasing holes or expanding. I like the making very much!

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

It has equipped combining the oakland type stay of a peyton place, and the color of 10 mm.
Since all the couplers of the electric system also including a meter and the object for blinkers are stuffed into the body, the hole currently vacated first is not used but it is wiring from the hole which I had made in a higher location by Schopp.
The lens projected to the convex shape just for a moment is pleasing in the quite classic image.
Although the irradiation range is not so wide, since a front road surface is illuminated firmly, dissatisfaction is not felt.
However, it seems to be better to use a high beam positively on a mountain path.
About evaluation, since a body was not luster luster like the paintwork of a motorcycle, it took -1.
However, since Wright of a black case does not reflect the sun compared with a plating case, he is recommended individually.

It considered and purchased in the Cafe-style of W800.Since the
Case was iron, it was able to be firmly attached only with two Bolts of a Light stay.

However, although he was using the Light stay of WM, he was not able to attach firmly with an attached Spacer.(accessories 10 millimeters in width)
It was able to attach firmly by manufacturing a 15-millimeter-wide Spacer individually.About

quality, I think that it is good.
pure lay could also lower the position of the light and has satisfied it very much.

It looks good, but the paint is somewhat rough.
Easy to install and made a pon attachment.
However, although there are three fixed Pin of Headlight itself, it is not fixed properly. Headlight rounds round and round while driving.
Without Headlight's round and round, the rating is 4.

It looks good, but the paint is somewhat rough.
Easy to install and made a pon attachment.
However, although there are three fixed Pin of Headlight itself, it is not fixed properly. Headlight rounds round and round while driving.
Without Headlight's round and round, the rating is 4.

Wiring got puzzled as Small hole in the mounting part became Small. I am glad that I did not have to process such as increasing holes or expanding. I like the making very much!

It considered and purchased in the Cafe-style of W800.Since the
Case was iron, it was able to be firmly attached only with two Bolts of a Light stay.

However, although he was using the Light stay of WM, he was not able to attach firmly with an attached Spacer.(accessories 10 millimeters in width)
It was able to attach firmly by manufacturing a 15-millimeter-wide Spacer individually.About

quality, I think that it is good.
pure lay could also lower the position of the light and has satisfied it very much.

It has equipped combining the oakland type stay of a peyton place, and the color of 10 mm.
Since all the couplers of the electric system also including a meter and the object for blinkers are stuffed into the body, the hole currently vacated first is not used but it is wiring from the hole which I had made in a higher location by Schopp.
The lens projected to the convex shape just for a moment is pleasing in the quite classic image.
Although the irradiation range is not so wide, since a front road surface is illuminated firmly, dissatisfaction is not felt.
However, it seems to be better to use a high beam positively on a mountain path.
About evaluation, since a body was not luster luster like the paintwork of a motorcycle, it took -1.
However, since Wright of a black case does not reflect the sun compared with a plating case, he is recommended individually.