Kembali ke atas

【KIJIMA】MX Grip

    • Penilaian:

Although the red grip was attached before, since it had come to have looked shabbily blackly than expected in the twinkling of a...

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-04-20 17:48:11
Although the red grip was attached before, since it had come to have looked shabbily blackly than expected in the twinkling of an eye, the black grip was chosen safely.
Although it is a peculiar grip, it did not necessarily take time until it got used to be easy to grasp.
Breathability is also O.
However, it was not felt that vibration decreased.
A custom grip is grasped empty-handed, and although there are some which are sticky if you sweat, there is this [ no ].
Since the rubber for a grip is not attached, he needs to buy it separately.
Although what is necessary is just attached to goods by 1 time just for a moment Smile

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

J

MX Grip

3 oleh Japan User(translated)

Pabrikan: KIJIMA

a picture -- a top -- a kijima and the bottom -- a yamaha -- it is pure.
By fall, since a crack enters, the handle grip of t...

a picture -- a top -- a kijima and the bottom -- a yamaha -- it is pure.
By fall, since a crack enters, the handle grip of the serow 225 purchases to exchange.
By the off-road system grip of a kijima, although it was the cheapest, when delivered goods are seen, it is structure of a price.
Especially a salivary portion is thin, and when compared from an authentic positive one, he is uncertain by the thickness of approximately a half.
However, probably, it will be satisfactory practically, since the grip feeling after carrying out a glove does not necessarily have great difference.
Compared with an authentic positive one with a feeling of a flat, the grip feeling in an empty hand has slightly much unevenness, and is stake touch sliding.
Although pure durability is wonderful, it can be estimated that the durability of this product is not used for a while.
Since the rubber commodity of a kijima is high quality, I would like to expect to also give this for a long time with.

J

MX Grip

3 oleh Japan User(translated)

Pabrikan: KIJIMA

If it is use of those other than a Race although this Clip had been used several times until now, it is a Grip which can complet...

If it is use of those other than a Race although this Clip had been used several times until now, it is a Grip which can completely be used ordinarily satisfactorily. I think that they are good goods since a price is also cheap, it is durable so so and there is also different colors.
There is touch that power is also in a little getting tired even if it grabs the Handle to the adhesion side of a Grip and a Glove too since there is little resistance if it merely becomes a Race, and opening an Axel from usual. If it is an ordinary practice run, town riding, and a path-through-a-wood grade, I think that this Grip is enough. I think that it is easy to ask since the
price is also about 1/3 price of a good Grip.

J

MX Grip

4 oleh Japan User(translated)

Pabrikan: KIJIMA

There was an impression of cheesy, but it is not so.

The thing is solid.. There was a cheapest impression, so I thought how it was, but I was firm. It is good. I think that it is excellent in Cost performance. I recommend..

J

MX Grip

5 oleh Japan User(translated)

Pabrikan: KIJIMA

KIJIMAKIJIMA: 201-481 MX Grip

【What made you decide the purchase?】
I wanted to try the quality of the product against the price of this KIJIMAKIJIMAMX Grip, Size (Length) Although it was slightly different, I bought it.

【How was it actually used?】
Although the price is cheap, it is a Grip that is familiar to the hand easily grasping the appearance as well as the appearance is not cheap at all.

It's a good idea to get tired of being a Grip of Simple Design in Orthodox.

In the Grip end part, FOREST ROAD (Forest road) And I'm glad that Name comes with a convex. Is it for forest road use? (Lol)

【Mounting was difficult?】
It was Non-PenetratingGrip, except for Grip end and customized to Pierced Type (Drill holes) I installed it, but the installation was not particularly difficult either.

【Please tell me the installation point and hang】
As mentioned above, this KIJIMAKI JIMAMX Grip is Non-Penetrating Grip end so if you need a Pierced Type Grip please open the hole with yourself before installing.
I put it on the Handlebar to which this Grip is attached, then push it further to the guigui and to the back, put the board at the Grip end, clamp the Grip end, crush the Grip end and push it a little at a time while rotating it to cut it Customize to Pierced Type.

If you want Grip of Closed End, please use it as it is product.

Because it has a groove that keeps Wire for winding prevention stopper rotation stop, it is very handy when using wire for stopping.

[Is there anything I was disappointed about?]
It is a pity that this KIJIMAKIJIMAMX Grip color is classic black, only one color.

【Hope for Manufacturer - Please let me know if you have any improvement points]
There is no Closed End if you do Penetrating by yourself, you can do it, but you can not do any staining of Grip.
As opposed to saying that, if you stain yourself, Cost takes too much.
By all means, I appreciate it if you can also get Color other than Black.

【Have you compared items?】
Pro grip's same etc. I compared it with the product Grip class.
This KIJIMAKIJIMAMX Grip is much cheaper and the surface Rubber quality is slightly stiff touch.

.

J

MX Grip

5 oleh Japan User(translated)

Pabrikan: KIJIMA

KIJIMAKIJIMA MX Grip

【What made you decide the purchase?】
As the grip part of the Red color made by another company grips Black, it is about time to exchange the Grip.
I was looking for something that was not good, and the price of this KIJIMAKIJIMA MX Grip was extremely cheap so I got it.
As a result of considering, I tried to buy it for trying to use it.

【How was it actually used?】
The Grip that was attached until just before was a red color grip made by another company that is 1 mm shorter than this KIJIMAKIJIMA MX Grip.

Since the color of Grip changed from red color to black color, we realized that we exchanged Grip with visual change and memory, but we have forgotten even Grip exchange with just grasping but the grip condition is almost unchanged Same etc. (Totally together) It can say.

【Mounting was difficult?】
Since I am mounting the HONDA CRF 250L on ArmorGuard, I can not exchange Grip unless I remove it, but Grip exchange is not difficult at all.

【Please tell me the installation point and hang】
If existing Grip can easily be removed to Beauty, installing a new Grip can also work easily and conveniently.

I have exchanged Grip over and over so I am trying to apply Grip adhesive to the smallest limit with the smallest requirement so that I do not get rid of existing grip removal at the future re-Grip exchange.

[Is there anything I was disappointed about?]
There was only a color that could be selected Black.
Occasionally, Black color Grip is also good and has been fitted with Black color Grip since OEMGrip.

【Hope for Manufacturer - Please let me know if you have any improvement points]
Same etc. Please sell colors other than Black color at the price of.

【Have you compared items?】
I compared it with various Grips of other companies.
Especially, compared with Progrip products compared with rubbing.

This KIJIMAKIJIMA MX Grip was cheap for the price so it was a Black color grip but tried purchasing.

[Others]
Although this KIJIMAKIJIMA MX Grip is a Grip which is easy to wear without difficulty in terms of performance and easy to grasp even with long distance driving, I think that it will be made by another company unfortunately because it will be the next time except for Black color.

.

J

MX Grip

5 oleh Japan User(translated)

Pabrikan: KIJIMA

KIJIMAKIJIMA MX Grip Closed End

This KIJIMA MX Grip is a closed end grip so if you want a Pierced Type you will either give up or make it Penetrating yourself.
I chose the latter.

Insert the Left SideGrip of this KIJIMA MX Grip into a thin Steel pipe with outer diameter Φ22 mm and make a GUID end for the Grip end.
Insert this KIJIMA MX Grip 's Right SideGrip into a thin Steel pipe with an outer diameter of 24 mm and make a Grip end..

Both of them slowly take time to carefully push them by hand or press them on a magazine and they are doing it, then the Grip end of this KIJIMA MX Grip Closed End changes to Pierced Type.

The Red Grip of another company that was previously attached was also Closed End's Grip, so I remembered what I was doing to Pierced Type like this KIJIMA MX Grip Closed End.

Even if you find a Grip that you want or like, I do not know if that GripLength matches or not.
Even if the Grip dimension matches, it is natural that the Grip end was Non-Penetrating.

For such a time, I have a thin Steel pipe Φ22 mm and Φ 24 mm as a Grip customization tool.
Thanks to its Grip customization tool, this KIJIMA MX Grip is also easy to attach to the Handlebar Grip equipped with ArmorGuard.

Because I do not encounter the Grip I like very much, as a result of trial and error, I have raised the probability of encountering with my favorite Grip considering the technique of easily making it Pierced Type.

I exchange Grip once a year, once a year every two years.
If it is a mileage, every 12000 km - 20000 km will be calculated with Grip exchange.

This KIJIMA MX Grip is a tightly grasped state with a solid Rubber quality for the price.
Although it may be a little hardened, even a little Grip is hard even if you have a solid and good quality Gloves palm will never get numb so Large is durable.

Although I am concerned about Grip, I am also concerned with Gloves, so we decide the ease of use of the grip part by Total balance.
Rotation is early because I am dividing Grip and Gloves as consumables.

.

J

MX Grip

5 oleh Japan User(translated)

Pabrikan: KIJIMA

KIJIMAKIJIMA MX Grip

Although this KIJIMA MX Grip has only Black, it is cheap Grip which is unprecedented to anything else, but I bought it because it was even cheaper at Sale.

This KIJIMA MX Grip is a very cheap Grip but very easy to grasp it is an excellent grip that is not slippery.

Rubber quality and surface irregularities such as other Manufacturer's expensive same etc etc. Compared to Grip this KIJIMA MX Grip is a Grip that is in no way inferior.

This is the only KIJIMA MX Grip color, but the cheapest thing is the charm of the biggest Large.
For those who do not care about coloring even with Size, I think that it is a perfect grip.

This KIJIMA MX Grip is soft because Rubber quality is so soft that it is not only slippery but also good touch, but is it hard to transmit? Even if it holds for a long time the palm is not numb.

This KIJIMA MX Grip 's Grip' s Pattern pattern has grooves so that it can be fixed by Wire, so Off - road raceetc. It is a full-fledged Offfor VehicleGrip which can also be used for.

By all means, it is Recommendation Grip to Grip of Off car, but there is only color Black and Grip size is Φ22. 2mm - Length 116 mm, and Grip end is Non-Penetrating, so for those who meet that condition, it is a Grip that will rejoice with both deliberations.

Regarding Non-Penetrating of Grip end of this KIJIMA MX Grip, you can easily make Penetrating the Grip end yourself, so flexibility will be beneficial.

This KIJIMA MX Grip is a very inexpensive grip, but it is made with a material that is inferior to the price, and it is felt that it is a product that is easy to use and has a relatively high durability.

This KIJIMA MX Grip is a Grip that can be recommended for off cars or maintenance beginners or for quite a few people.

Especially for maintenance beginners, I think that it is easy to price Challenge for cheap price, so I think that you can TRY to exchange Grip by all means without fear of failure.

Since this KIJIMA MX Grip has only one color Black, even if you exchange the Grip, it is lonely because it does not change visually.
If it's nothing special, if there are other colors, you can change the color every time you exchange, so it can be Repeat but unfortunately it's so cheap that it is so cheap but it will be "Limited Mr.".

.

J

MX Grip

5 oleh Japan User(translated)

Pabrikan: KIJIMA

KIJIMAKIJIMA MX Grip

Although this KIJIMA MX Grip has only Black, it is cheap Grip which is unprecedented to anything else, but I bought it because it was even cheaper at Sale.

This KIJIMA MX Grip is a very cheap Grip but very easy to grasp it is an excellent grip that is not slippery.

Rubber quality and surface irregularities such as other Manufacturer's expensive same etc etc. Compared to Grip this KIJIMA MX Grip is a Grip that is in no way inferior.

This is the only KIJIMA MX Grip color, but the cheapest thing is the charm of the biggest Large.
For those who do not care about coloring even with Size, I think that it is a perfect grip.

This KIJIMA MX Grip is soft because Rubber quality is so soft that it is not only slippery but also good touch, but is it hard to transmit? Even if it holds for a long time the palm is not numb.

This KIJIMA MX Grip 's Grip' s Pattern pattern has grooves so that it can be fixed by Wire, so Off - road raceetc. It is a full-fledged Offfor VehicleGrip which can also be used for.

By all means, it is Recommendation Grip to Grip of Off car, but there is only color Black and Grip size is Φ22. 2mm - Length 116 mm, and Grip end is Non-Penetrating, so for those who meet that condition, it is a Grip that will rejoice with both deliberations.

Regarding Non-Penetrating of Grip end of this KIJIMA MX Grip, you can easily make Penetrating the Grip end yourself, so flexibility will be beneficial.

This KIJIMA MX Grip is a very inexpensive grip, but it is made with a material that is inferior to the price, and it is felt that it is a product that is easy to use and has a relatively high durability.

This KIJIMA MX Grip is a Grip that can be recommended for off cars or maintenance beginners or for quite a few people.

Especially for maintenance beginners, I think that it is easy to price Challenge for cheap price, so I think that you can TRY to exchange Grip by all means without fear of failure.

Since this KIJIMA MX Grip has only one color Black, even if you exchange the Grip, it is lonely because it does not change visually.
If it's nothing special, if there are other colors, you can change the color every time you exchange, so it can be Repeat but unfortunately it's so cheap that it is so cheap but it will be "Limited Mr.".

.

J

MX Grip

5 oleh Japan User(translated)

Pabrikan: KIJIMA

KIJIMAKIJIMA MX Grip Closed End

This KIJIMA MX Grip is a closed end grip so if you want a Pierced Type you will either give up or make it Penetrating yourself.
I chose the latter.

Insert the Left SideGrip of this KIJIMA MX Grip into a thin Steel pipe with outer diameter Φ22 mm and make a GUID end for the Grip end.
Insert this KIJIMA MX Grip 's Right SideGrip into a thin Steel pipe with an outer diameter of 24 mm and make a Grip end..

Both of them slowly take time to carefully push them by hand or press them on a magazine and they are doing it, then the Grip end of this KIJIMA MX Grip Closed End changes to Pierced Type.

The Red Grip of another company that was previously attached was also Closed End's Grip, so I remembered what I was doing to Pierced Type like this KIJIMA MX Grip Closed End.

Even if you find a Grip that you want or like, I do not know if that GripLength matches or not.
Even if the Grip dimension matches, it is natural that the Grip end was Non-Penetrating.

For such a time, I have a thin Steel pipe Φ22 mm and Φ 24 mm as a Grip customization tool.
Thanks to its Grip customization tool, this KIJIMA MX Grip is also easy to attach to the Handlebar Grip equipped with ArmorGuard.

Because I do not encounter the Grip I like very much, as a result of trial and error, I have raised the probability of encountering with my favorite Grip considering the technique of easily making it Pierced Type.

I exchange Grip once a year, once a year every two years.
If it is a mileage, every 12000 km - 20000 km will be calculated with Grip exchange.

This KIJIMA MX Grip is a tightly grasped state with a solid Rubber quality for the price.
Although it may be a little hardened, even a little Grip is hard even if you have a solid and good quality Gloves palm will never get numb so Large is durable.

Although I am concerned about Grip, I am also concerned with Gloves, so we decide the ease of use of the grip part by Total balance.
Rotation is early because I am dividing Grip and Gloves as consumables.

.

J

MX Grip

5 oleh Japan User(translated)

Pabrikan: KIJIMA

KIJIMAKIJIMA MX Grip

【What made you decide the purchase?】
As the grip part of the Red color made by another company grips Black, it is about time to exchange the Grip.
I was looking for something that was not good, and the price of this KIJIMAKIJIMA MX Grip was extremely cheap so I got it.
As a result of considering, I tried to buy it for trying to use it.

【How was it actually used?】
The Grip that was attached until just before was a red color grip made by another company that is 1 mm shorter than this KIJIMAKIJIMA MX Grip.

Since the color of Grip changed from red color to black color, we realized that we exchanged Grip with visual change and memory, but we have forgotten even Grip exchange with just grasping but the grip condition is almost unchanged Same etc. (Totally together) It can say.

【Mounting was difficult?】
Since I am mounting the HONDA CRF 250L on ArmorGuard, I can not exchange Grip unless I remove it, but Grip exchange is not difficult at all.

【Please tell me the installation point and hang】
If existing Grip can easily be removed to Beauty, installing a new Grip can also work easily and conveniently.

I have exchanged Grip over and over so I am trying to apply Grip adhesive to the smallest limit with the smallest requirement so that I do not get rid of existing grip removal at the future re-Grip exchange.

[Is there anything I was disappointed about?]
There was only a color that could be selected Black.
Occasionally, Black color Grip is also good and has been fitted with Black color Grip since OEMGrip.

【Hope for Manufacturer - Please let me know if you have any improvement points]
Same etc. Please sell colors other than Black color at the price of.

【Have you compared items?】
I compared it with various Grips of other companies.
Especially, compared with Progrip products compared with rubbing.

This KIJIMAKIJIMA MX Grip was cheap for the price so it was a Black color grip but tried purchasing.

[Others]
Although this KIJIMAKIJIMA MX Grip is a Grip which is easy to wear without difficulty in terms of performance and easy to grasp even with long distance driving, I think that it will be made by another company unfortunately because it will be the next time except for Black color.

.

J

MX Grip

5 oleh Japan User(translated)

Pabrikan: KIJIMA

KIJIMAKIJIMA: 201-481 MX Grip

【What made you decide the purchase?】
I wanted to try the quality of the product against the price of this KIJIMAKIJIMAMX Grip, Size (Length) Although it was slightly different, I bought it.

【How was it actually used?】
Although the price is cheap, it is a Grip that is familiar to the hand easily grasping the appearance as well as the appearance is not cheap at all.

It's a good idea to get tired of being a Grip of Simple Design in Orthodox.

In the Grip end part, FOREST ROAD (Forest road) And I'm glad that Name comes with a convex. Is it for forest road use? (Lol)

【Mounting was difficult?】
It was Non-PenetratingGrip, except for Grip end and customized to Pierced Type (Drill holes) I installed it, but the installation was not particularly difficult either.

【Please tell me the installation point and hang】
As mentioned above, this KIJIMAKI JIMAMX Grip is Non-Penetrating Grip end so if you need a Pierced Type Grip please open the hole with yourself before installing.
I put it on the Handlebar to which this Grip is attached, then push it further to the guigui and to the back, put the board at the Grip end, clamp the Grip end, crush the Grip end and push it a little at a time while rotating it to cut it Customize to Pierced Type.

If you want Grip of Closed End, please use it as it is product.

Because it has a groove that keeps Wire for winding prevention stopper rotation stop, it is very handy when using wire for stopping.

[Is there anything I was disappointed about?]
It is a pity that this KIJIMAKIJIMAMX Grip color is classic black, only one color.

【Hope for Manufacturer - Please let me know if you have any improvement points]
There is no Closed End if you do Penetrating by yourself, you can do it, but you can not do any staining of Grip.
As opposed to saying that, if you stain yourself, Cost takes too much.
By all means, I appreciate it if you can also get Color other than Black.

【Have you compared items?】
Pro grip's same etc. I compared it with the product Grip class.
This KIJIMAKIJIMAMX Grip is much cheaper and the surface Rubber quality is slightly stiff touch.

.

J

MX Grip

4 oleh Japan User(translated)

Pabrikan: KIJIMA

There was an impression of cheesy, but it is not so.

The thing is solid.. There was a cheapest impression, so I thought how it was, but I was firm. It is good. I think that it is excellent in Cost performance. I recommend..

J

MX Grip

3 oleh Japan User(translated)

Pabrikan: KIJIMA

If it is use of those other than a Race although this Clip had been used several times until now, it is a Grip which can completely be used ordinarily satisfactorily. I think that they are good goods since a price is also cheap, it is durable so so and t

If it is use of those other than a Race although this Clip had been used several times until now, it is a Grip which can completely be used ordinarily satisfactorily. I think that they are good goods since a price is also cheap, it is durable so so and there is also different colors.
There is touch that power is also in a little getting tired even if it grabs the Handle to the adhesion side of a Grip and a Glove too since there is little resistance if it merely becomes a Race, and opening an Axel from usual. If it is an ordinary practice run, town riding, and a path-through-a-wood grade, I think that this Grip is enough. I think that it is easy to ask since the
price is also about 1/3 price of a good Grip.

J

MX Grip

3 oleh Japan User(translated)

Pabrikan: KIJIMA

a picture -- a top -- a kijima and the bottom -- a yamaha -- it is pure.
By fall, since a crack enters, the handle grip of the serow 225 purchases to exchange.
By the off-road system grip of a kijima, although it was the cheapest, when delivered g

a picture -- a top -- a kijima and the bottom -- a yamaha -- it is pure.
By fall, since a crack enters, the handle grip of the serow 225 purchases to exchange.
By the off-road system grip of a kijima, although it was the cheapest, when delivered goods are seen, it is structure of a price.
Especially a salivary portion is thin, and when compared from an authentic positive one, he is uncertain by the thickness of approximately a half.
However, probably, it will be satisfactory practically, since the grip feeling after carrying out a glove does not necessarily have great difference.
Compared with an authentic positive one with a feeling of a flat, the grip feeling in an empty hand has slightly much unevenness, and is stake touch sliding.
Although pure durability is wonderful, it can be estimated that the durability of this product is not used for a while.
Since the rubber commodity of a kijima is high quality, I would like to expect to also give this for a long time with.

J

MX Grip

3 oleh Japan User(translated)

Pabrikan: KIJIMA

Although the red grip was attached before, since it had come to have looked shabbily blackly than expected in the twinkling of an eye, the black grip was chosen safely.
Although it is a peculiar grip, it did not necessarily take time until it got used

Although the red grip was attached before, since it had come to have looked shabbily blackly than expected in the twinkling of an eye, the black grip was chosen safely.
Although it is a peculiar grip, it did not necessarily take time until it got used to be easy to grasp.
Breathability is also O.
However, it was not felt that vibration decreased.
A custom grip is grasped empty-handed, and although there are some which are sticky if you sweat, there is this [ no ].
Since the rubber for a grip is not attached, he needs to buy it separately.
Although what is necessary is just attached to goods by 1 time just for a moment Smile