Kembali ke atas

【NHK】Steering Damper Kit

    • Penilaian:

Since it can stabilize and run at both rectilinear propagation and a corner if it equips with and runs these parts, it is very s...

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-05-11 17:29:04
Since it can stabilize and run at both rectilinear propagation and a corner if it equips with and runs these parts, it is very satisfied.
Since it is conspicuous whatever it may say [ it and ], UP also of the degree is carried out custom.
It seems that it is [ which a bad place seemingly has to rain and is easy to rust ] better for after the rainy weather run to have rusted and to consider a measure since like. [ weak ]

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

The stability of the hornet of the front was low, and also when bending, as there were characteristics that the handle is incised more than needed, since it was sometimes always plentifully strained when running the winding especially whose road surface was ruined, it opted for purchase.
Although it was attachment first, probably because it was doing maintenance-related work, there is no difficulty of attachment which comes from the difficult description with which many people are described, and it was able to attach easily.
When run by actually attaching, stability became good, and to be sure, the roughness of a little road surface is also satisfactory, and the handle's was stable.
A cut of a handle also with rapid winding is lost and becomes quite easy to do a self stir.
Therefore, I think that this can carry out a recommend considerably.
Probably, it will be better to apply a lock tite to the bolt used for attachment, if it mentions as notes at the time of one attachment.
It was loosening, when binding tight after a 2~3 times run and checking torque.

It attached to the hornet of 07 models.
Although the work itself finishes with about 10 minutes, it requires time for adjustment somewhat.
It is preeminent for an effect and the parts which can be felt like this are the first.
The selfish cut which comes from 16 inches of fronts peculiar to a hornet came to be suppressed very much.
we can very recommend you -- custom .

Although the front tire gathered WADACHI well, the handle blurred and the hornet 250 had felt somewhat fearful several times,
After equipping with the steering damper, even if it made it the lightest, that a handle is taken by WADACHI decreased, and about by the 2nd, it will not be taken mostly at WADACHI and can run now pleasantly.
Although it is high and being wavered, it is surprised when attaching! I think that there is value to incur.

It is 3 in the general road whose after-wearing constancy improves markedly to HORNET. If the high speed 3~4 is used and 6 is tried on a chair peak, it will not bend by a solidly.
It always has a hexagon head supposing having become hollow on the left.

It is 3 in the general road whose after-wearing constancy improves markedly to HORNET. If the high speed 3~4 is used and 6 is tried on a chair peak, it will not bend by a solidly.
It always has a hexagon head supposing having become hollow on the left.

Although the front tire gathered WADACHI well, the handle blurred and the hornet 250 had felt somewhat fearful several times,
After equipping with the steering damper, even if it made it the lightest, that a handle is taken by WADACHI decreased, and about by the 2nd, it will not be taken mostly at WADACHI and can run now pleasantly.
Although it is high and being wavered, it is surprised when attaching! I think that there is value to incur.

It attached to the hornet of 07 models.
Although the work itself finishes with about 10 minutes, it requires time for adjustment somewhat.
It is preeminent for an effect and the parts which can be felt like this are the first.
The selfish cut which comes from 16 inches of fronts peculiar to a hornet came to be suppressed very much.
we can very recommend you -- custom .

The stability of the hornet of the front was low, and also when bending, as there were characteristics that the handle is incised more than needed, since it was sometimes always plentifully strained when running the winding especially whose road surface was ruined, it opted for purchase.
Although it was attachment first, probably because it was doing maintenance-related work, there is no difficulty of attachment which comes from the difficult description with which many people are described, and it was able to attach easily.
When run by actually attaching, stability became good, and to be sure, the roughness of a little road surface is also satisfactory, and the handle's was stable.
A cut of a handle also with rapid winding is lost and becomes quite easy to do a self stir.
Therefore, I think that this can carry out a recommend considerably.
Probably, it will be better to apply a lock tite to the bolt used for attachment, if it mentions as notes at the time of one attachment.
It was loosening, when binding tight after a 2~3 times run and checking torque.

Since it can stabilize and run at both rectilinear propagation and a corner if it equips with and runs these parts, it is very satisfied.
Since it is conspicuous whatever it may say [ it and ], UP also of the degree is carried out custom.
It seems that it is [ which a bad place seemingly has to rain and is easy to rust ] better for after the rainy weather run to have rusted and to consider a measure since like. [ weak ]