Kembali ke atas

【DAYTONA】Fitting Kit for Universal Rear Shock

    • Penilaian:

When it is going to equip with SG325 of KYB as rear suspension of the address V125, it is the kit which was indebted.
SG325 ...

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-05-11 17:31:57
When it is going to equip with SG325 of KYB as rear suspension of the address V125, it is the kit which was indebted.
SG325 is 8 mm although the prepared hole of normal suspension is 10 mm.
Since the receptacle by the side of an engine naturally also serves as a 10-mm hole, a device is needed here.
Since the 8-mm bolt, the washer, and the color with an outside diameter of 10 mm are a set at this fitting kit, this mismatching is cancelable by one shot.
It is five-star [ of gratitude in Mr. Daytona who is doing the lineup of such considerate parts exactly ].
(^-^)v

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

The things of a photograph are all.
I think that it is dependent on the person whether it takes or it will take if cheap if high.
However, since there was this, SG325 of KYB was able to be constructed to the address V125.

The things of a photograph are all.
I think that it is dependent on the person whether it takes or it will take if cheap if high.
However, since there was this, SG325 of KYB was able to be constructed to the address V125.

When it is going to equip with SG325 of KYB as rear suspension of the address V125, it is the kit which was indebted.
SG325 is 8 mm although the prepared hole of normal suspension is 10 mm.
Since the receptacle by the side of an engine naturally also serves as a 10-mm hole, a device is needed here.
Since the 8-mm bolt, the washer, and the color with an outside diameter of 10 mm are a set at this fitting kit, this mismatching is cancelable by one shot.
It is five-star [ of gratitude in Mr. Daytona who is doing the lineup of such considerate parts exactly ].
(^-^)v