- Beranda
- Ulasan Produk
- Sparepart Motor
- Bodywork
- Bracket Box
- Saya ingin sedikit lebih banyak daya dukung beba... (G-Craft: Rear Rack)
【G-Craft】Rear Rack Review
I wanted a little more load bearing capacity.
As for installation, it is easy to understand if you look closely at the Illustration.
If you remove the Plastic Blind on the side of the Seat, you will see the M8 Female Screw on the Seat rail, and simply fasten it with Bolt through the attached collars in 4 places.
The carriers are narrowed backward from the width of the rear edge of the Seat and extended at the same height as the Seat, so that a small type Seat bag can be installed without any problem, and a slightly large type bag can be fixed depending on your ingenuity.
However, the load capacity is limited to 3 kg, so care may be required when placing very heavy objects on it.
The Carrier and Bracket are made of iron and painted black, but I think it is probably a baked-on paint with strength.
The collar between the Bracket and the Seat rail is Material:The M8 Bolt that holds the Bracket is Stainless Steel, but the Bolt that holds the Washer, Bracket and CarrierBody is Plating.
I prepared Stainless Steel Black painted Bolts to match the Black Carrier.
The silhouette is not a typical "carrier" silhouette, but rather a natural, backward design that extends smoothly and naturally.
In detail, on the top surface of the Carrier Gcraft" The product had a Laser engraving of "L", and I liked the fact that they did not cut corners.
Saya ingin sedikit lebih banyak daya dukung beban.
Untuk pemasangan, mudah dipahami jika Anda melihat dari dekat Ilustrasi.
Jika Anda melepas Tirai Plastik di sisi Kursi, Anda akan melihat Sekrup Wanita M8 pada rel Kursi, dan cukup kencangkan dengan Baut melalui kerah yang terpasang di 4 tempat.
Pengangkut dipersempit ke belakang dari lebar tepi belakang Kursi dan diperpanjang pada ketinggian yang sama dengan Kursi, sehingga tas Kursi tipe kecil dapat dipasang tanpa masalah, dan tas tipe yang sedikit besar dapat diperbaiki tergantung pada kecerdikan Anda.
Namun, kapasitas beban dibatasi hingga 3 kg, jadi mungkin diperlukan kehati-hatian saat meletakkan benda yang sangat berat di atasnya.
Carrier dan Bracket terbuat dari besi dan dicat hitam, tapi saya pikir itu mungkin cat yang dipanggang dengan kekuatan.
Kerah antara Braket dan rel Kursi adalah Bahan: Baut M8 yang menahan Braket adalah Stainless Steel, tetapi Baut yang menahan Washer, Braket, dan CarrierBody adalah Plating.
Saya menyiapkan Baut Cat Hitam Stainless Steel agar sesuai dengan Pengangkut Hitam.
Siluetnya bukanlah siluet "carrier" yang khas, melainkan desain belakang yang natural yang memanjang dengan mulus dan alami.
Secara rinci, di permukaan atas Carrier Gcraft" Produk memiliki ukiran Laser "L", dan saya menyukai fakta bahwa mereka tidak memotong sudut.