- Beranda
- Ulasan Produk
- Sparepart Motor
- Rantai / Gear
- Set Kopling
- Centrifuge yang ditingkatkan akan menjadi ini... (SP Takegawa: Reinforced Centrifugal Clutch Kit)
【SP Takegawa】Reinforced Centrifugal Clutch Kit Review
Sesuai: HONDA SUPER CUB 50, HONDA DAX, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA XR50R (for competition), HONDA SUPER CUB 50, HONDA solo, HONDA GIORCUB, HONDA CRF50F, HONDA Z50R
The enhanced centrifuge will end up being this
This is the fourth one I've used.
If you're bore up to 110cc or so, the 90Clutch won't hold it, so you'll need this reinforced centrifuge.
You will have to put it in. It's the strongest of the centrifuges, light on tread and easy to handle.
The 32-piece Weight contributes to Plate's crimping power, and normally 32 pieces of Weight would be
The meet point becomes low, but that's where ClutchFreeSpring and other
It's properly adjusted in Setting so you can use it without any discomfort.
Plate loss is as low as OEM even when used on Hard in conditions with a lot of half-clusters.
This is the fourth regular replacement, and Plate is still in use for 10,000km in conditions where there are many two-seater vehicles.
It's not much less. It's quite amazing.
In addition, there is a difference between the previous and current products in general, and in the current product, Lifter Plate is mainly
It was changed and it became hard to crack. The old one was easy to get cracks in the screw part of the plate.
(But it worked fine).
Also, the accuracy of the parts has been improved, and it is possible to incorporate the parts without removing the BALI.
It is designed to perform. The previous ones can be taken BALI or still haGap
Individuals may need to run 100km or so to get the MeatPoint to work properly.
However, the current system does not do that.
Even though the overall feel has changed, the feel itself is the same. Crimping power, MeatPoint, etc. are also the same.
Almost the same.
If you are interested in centrifuging your CUB with Bore up, you should definitely buy these Items.
Centrifuge yang ditingkatkan akan menjadi ini
Ini adalah yang keempat yang saya gunakan.
Jika Anda memiliki kapasitas hingga 110cc atau lebih, 90Clutch tidak akan menahannya, jadi Anda memerlukan centrifuge yang diperkuat ini.
Anda harus memasukkannya. Ini sentrifugal terkuat, ringan di tapak, dan mudah ditangani.
Berat 32 buah berkontribusi pada kekuatan crimping Plate, dan biasanya 32 buah Berat adalah
Titik temu menjadi rendah, tetapi di situlah ClutchFreeSpring dan lainnya
Ini disesuaikan dengan benar di Pengaturan sehingga Anda dapat menggunakannya tanpa ketidaknyamanan.
Kehilangan pelat serendah OEM bahkan ketika digunakan pada Hard dalam kondisi dengan banyak half-cluster.
Ini adalah penggantian reguler keempat, dan Plat masih digunakan untuk 10.000 km dalam kondisi di mana ada banyak kendaraan dua tempat duduk.
Ini tidak jauh lebih sedikit. Ini sangat menakjubkan.
Selain itu, ada perbedaan antara produk sebelumnya dan saat ini secara umum, dan pada produk saat ini, Plat Pengangkat terutama
Itu berubah dan menjadi sulit untuk dipecahkan. Yang lama mudah retak di bagian sekrup pelat.
(Tapi itu bekerja dengan baik).
Selain itu, akurasi suku cadang telah ditingkatkan, dan dimungkinkan untuk menggabungkan suku cadang tanpa melepas BALI.
Hal ini dirancang untuk melakukan. Yang sebelumnya bisa ambil BALI atau masih haGap
Individu mungkin perlu berlari sejauh 100km atau lebih agar MeatPoint berfungsi dengan baik.
Namun, sistem saat ini tidak melakukan itu.
Meski secara keseluruhan rasa telah berubah, rasa itu sendiri tetap sama. Crimping power, MeatPoint, dll juga sama.
Hampir sama.
Jika Anda tertarik untuk mensentrifugasi CUB Anda dengan Bore up, Anda harus membeli Item ini.