- Beranda
- Ulasan Produk
- Sparepart Motor
- Sparepart Mesin
- Sparepart Pengapian
- Ignition Coil / Igniter
- Perbaikan Suku Cadang... (ADVANCEPro: Address V125 Reinforced Ignition Coil Ignition System Grounding Set)
【ADVANCEPro】Address V125 Reinforced Ignition Coil Ignition System Grounding Set Review
Sesuai: SUZUKI address V125
Repair Parts
The mileage is almost 30,000km, so I replaced it to prevent Trouble.
(OEMCoil is still available.)
Bolt1 pc of CoilBody to Inner cowl when removing and installing.
Because of the interference, four Floor Bolts and
Remove the bottom of the Helmet in so that you can access it from the top and side.
I worked on it.
The Grounding Wire attached to the CoilBody is
I tightened the bolt that connects the throttle body to the engine.
(The part where the ↑Indicator is sandwiched)
The Plug cap has a diameter that matches the diameter of the Plug hole.
The Plug hole can be closed properly because the Cap is attached.
When attaching to the Plug, the Cap can be firmly inserted to the back.
If you don't push it in, you'll get a half-hearted fit.
I think it's better to be careful.
(When OEM Product is installed) "Snap" (Because there is almost no feeling of
After the installation, the torque in the low speed range was increased.
Smooth acceleration feeling was obtained.
It is an effective product with better starting performance.
I'm worried because I don't know how durable it will be.
Recommendation for price and performance.
Perbaikan Suku Cadang
Jarak tempuhnya hampir 30.000km, jadi saya menggantinya untuk mencegah Masalah.
(OEMCoil masih tersedia.)
Baut 1 buah CoilBody ke penutup bagian dalam saat melepas dan memasang.
Karena gangguan, empat Baut Lantai dan
Lepaskan bagian bawah Helm sehingga Anda dapat mengaksesnya dari atas dan samping.
Saya mengerjakannya.
Kabel Grounding yang terpasang pada CoilBody adalah
Saya mengencangkan baut yang menghubungkan throttle body ke mesin.
(Bagian di mana Indikator diapit)
Tutup Plug memiliki diameter yang sesuai dengan diameter lubang Plug.
Lubang Plug dapat ditutup dengan baik karena Cap sudah terpasang.
Saat memasang ke Steker, Tutup dapat dimasukkan dengan kuat ke belakang.
Jika Anda tidak mendorongnya, Anda akan mendapatkan fit setengah hati.
Saya pikir lebih baik berhati-hati.
(Ketika Produk OEM diinstal) "Snap" (Karena hampir tidak ada perasaan
Setelah pemasangan, torsi dalam rentang kecepatan rendah ditingkatkan.
Perasaan akselerasi halus diperoleh.
Ini adalah produk yang efektif dengan kinerja awal yang lebih baik.
Saya khawatir karena saya tidak tahu seberapa tahan lama itu.
Rekomendasi untuk harga dan kinerja.