- Beranda
- Ulasan Produk
- Sparepart Motor
- Bodywork
- Jok & Aksesoris
- Cover Jok
- Sensasi sekali, warnai sesukamu!... (GRONDEMENT: JAPAN Seat Cover Re-covering Type)
【GRONDEMENT】JAPAN Seat Cover Re-covering Type Review
One-off sensation, color it to your liking!
I reupholstered the Seat of the last model FI LITTLE CUB.
The Rubber Type is easy to work with and requires no tools, but if you want to make your own chain
I want to reupholster it well, so I chose this one.
Because LITTLE CUB of our house is all penned to Yellow color & Black, it is in the meaning of Coordinates.
Yellow Color Piping & Color:I decided to go with Emboss in Gray.
I was prepared for the delivery time as it was a special made-to-order item, but it arrived in about two weeks.
The instruction manual is written in the package and there is also a video guide.
The guidance was very detailed and reassuring.
1. Remove the Seat from the car body (NutQuantity of 10mm):2pc. (Set)
2. Remove the conventional Kaw (with Slotted screwdriver and Pliers)
3.The fixing of the reupholstering Seat is back and forth→Quantity:Pair (for Left and Right) and stop it with Tucker while pulling on the diagonal.
(You can also use HandTucker, but I used Air Tucker, 10mm wide and 6mm long.
The difficulty of reupholstering Seat in CUB is low.
It's hard to make a mistake the first time if you make a firm decision not to rush into a Wrinkle.
Also, when you remove the leather from the Normal seat, there is a Vinyl sheet sandwiched between the surface of the Sponge
Do not throw this away, use it as is. If the Vinyl is deteriorated or torn, you can use the Vinyl bag as
It would be better to cut or otherwise tuck it in.
Having Vinyl underneath will prevent rainwater from seeping into the Sponge through the seams when it gets wet, or seeping out through the seams when you sit on it.
The work took about 20 minutes to complete.
About color
I thought that BlackEmboss is not white, and I dared to use full EmbossColor!:I went with the Gray color, which I kind of regret.
The actual product is brighter than the Image in the product photo, so it looks a bit dirty.
I should have made a safe Black & Yellow color Piping...
There are some cheap SeatAssy available in Asia, but the Urethane foam is hard.
If you are OK with the STD Shape, you may want to reupholster it because the seating comfort will be different from the OEM.
Sensasi sekali, warnai sesukamu!
Saya melapisi jok model terakhir FI LITTLE CUB.
Jenis Karet mudah digunakan dan tidak memerlukan alat, tetapi jika Anda ingin membuat rantai sendiri
Saya ingin melapisinya kembali dengan baik, jadi saya memilih yang ini.
Karena LITTLE CUB dari rumah kami semuanya di warnai Kuning & Hitam, maka ini berarti Koordinat.
Perpipaan & Warna Warna Kuning: Saya memutuskan untuk menggunakan Emboss in Grey.
Saya siap untuk waktu pengiriman karena itu adalah barang pesanan khusus, tetapi barang itu tiba dalam waktu sekitar dua minggu.
Instruksi manual tertulis dalam paket dan ada juga panduan video.
Bimbingannya sangat rinci dan meyakinkan.
1. Lepaskan Kursi dari badan mobil (Kuantitas Kacang 10mm):2pc. (Mengatur)
2. Lepaskan Kaw konvensional (dengan obeng dan Tang Berlubang)
3 Pemasangan reupholstering Seat bolak-balik→ Quantity: Pair (untuk Kiri dan Kanan) dan hentikan dengan Tucker sambil menarik diagonal.
(Anda juga dapat menggunakan HandTucker, tetapi saya menggunakan Air Tucker, lebar 10mm dan panjang 6mm.
Tingkat kesulitan reupholstering Seat di CUB tergolong rendah.
Sulit untuk membuat kesalahan pertama kali jika Anda membuat keputusan tegas untuk tidak terburu-buru ke dalam Kerut.
Juga, saat Anda melepas kulit dari kursi Normal, ada lembaran Vinyl yang diapit di antara permukaan Spons
Jangan dibuang, pakai apa adanya. Jika Vinyl rusak atau sobek, Anda dapat menggunakan tas Vinyl sebagai:
Akan lebih baik untuk memotong atau memasukkannya ke dalam.
Memiliki Vinyl di bawahnya akan mencegah air hujan merembes ke dalam Spons melalui jahitannya saat basah, atau merembes keluar melalui jahitannya saat Anda duduk di atasnya.
Pekerjaan itu memakan waktu sekitar 20 menit untuk diselesaikan.
Tentang warna
Saya pikir BlackEmboss tidak putih, dan saya berani menggunakan EmbossColor penuh!:Saya memilih warna Abu-abu, yang agak saya sesali.
Produk asli lebih terang dari Gambar di foto produk, jadi terlihat agak kotor.
Saya seharusnya membuat Piping warna Hitam & Kuning yang aman ...
Ada beberapa SeatAssy murah yang tersedia di Asia, tetapi busa Uretannya keras.
Jika Anda setuju dengan Bentuk STD, Anda mungkin ingin melapisinya kembali karena kenyamanan tempat duduknya akan berbeda dari OEM.