Kembali ke atas

【PIAA】MB44 Extreme Force Bulb

    • Penilaian:

TDM850 98-year type It is a reverse vehicle.
Since Wright of normal was dark, it attached to run comfortably as much as poss...

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-06-15 20:09:01
TDM850 98-year type It is a reverse vehicle.
Since Wright of normal was dark, it attached to run comfortably as much as possible at night.
Although I thought that HID was the brightest, it decided to consider a price, the time and effort of attachment, etc. and to make it the easiest bulb replacement.
It is easy also in feeling to require only the replacement with normal.
In my model, H1 and H3 type are used and a mouthpiece is different by Hi/Low.
(It has written on the end of a lens) attachment is the same as other motorcycles, it is not special, and a special tool is unnecessary -- it was (the tool which removes a cowl was required).
If a side cowl is removed and a screen and a front cowl are removed, a hand will enter simply.
Although it may be necessary to remove a cowl to there, since it had to prevent from touching a glass portion, it removed and worked for the sense.
If compared with HID, it may be unsatisfactory, but tone compares with normal, or becomes and it feels it white.
Conspicuousness also improved considerably.
It is thought that especially night, an indicator, and a signboard became legible.
Although it seems that it is satisfactory at all although it is the thermal problem about which it cared for a while and is a resin lens, the trouble of becoming cloudy or melting etc. has not arisen.
There can be many runs at night or the price and work are [ but ] easy and there are a direction and the direction ... to change appearance into can recommend you.

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

J

MB44 Extreme Force Bulb

4 oleh Japan User(translated)

Pabrikan: PIAA

Since it was too dark if pure, he bought it with what can be changed comparatively cheaply and simply and conveniently.
Exch...

Since it was too dark if pure, he bought it with what can be changed comparatively cheaply and simply and conveniently.
Exchange is very easy.
(It is ... although pains was taken over attachment of the half cowl of a motorcycle) Although it ran the night journey after exchange, since it became bright compared with the original thing, it is satisfied.
If it can do, he wants HID, but a price is severe too.
since a way dark to there is not not much run -- this -- necessity -- enough!

J

MB44 Extreme Force Bulb

4 oleh Japan User(translated)

Pabrikan: PIAA

PIAA products are used for some time.
Although super plasma GT-X was used, the bulb has gone out.
Although the light app...

PIAA products are used for some time.
Although super plasma GT-X was used, the bulb has gone out.
Although the light appropriate for purple was pleasing, the extreme force of the white blue light which endures HID is purchased this time.
White blue light is satisfied brightly enough.
Although it is not the brightness of HID after all, it is enough for me who seldom run at night.

J

MB44 Extreme Force Bulb

5 oleh Japan User(translated)

Pabrikan: PIAA

Since it put into MT-01LoHB4HiH7Lo, it also treated Hi.
It illuminates brightly by Hi and the product and 笙ェ night journey w...

Since it put into MT-01LoHB4HiH7Lo, it also treated Hi.
It illuminates brightly by Hi and the product and 笙ェ night journey with it rubbed and carried out are 竓?222 (^omega^) 2竓?Boone. [ bright Hi or ] [ satisfying ]

J

MB44 Extreme Force Bulb

5 oleh Japan User(translated)

Pabrikan: PIAA

The LOW Beam is set to 6000K of HID. Although HI Beam was hardly used, either, since it also seldom ran in the
night Thes...

The LOW Beam is set to 6000K of HID. Although HI Beam was hardly used, either, since it also seldom ran in the
night These days comes, frequency goes up and it is because of too much of the darkness. It became exchange of the Valve. It is exchange from super white by the
said Manufacturer. Left-hand side is HI Beam with the
photograph. Grade hardly worried if it is from the transverse plane of a car body although the color was considerably different and it is reflected. good also in a actual run, since the direction of HI Beam illuminates a long distance white (harmonic of 1000RTL2 lights) -- it feels, and it comes out and is satisfactory. Visibility also becomes good and came to be able to perform a safer run.

J

MB44 Extreme Force Bulb

4 oleh Japan User(translated)

Pabrikan: PIAA

Since the Low beam is using HID of a SOLAM, when a High beam continues being a Normal valve and lights up to very bright one, I...

Since the Low beam is using HID of a SOLAM, when a High beam continues being a Normal valve and lights up to very bright one, In order to shine in thin yellow considerably, the duty of the High beam was not fully realized and purchased this product from appearance not having been good, either.
attachment is easy and it only changes it with a Normal valve. However, although time and effort costs arriving at the place of a Valve for a while, it is not becoming pain so much. (I think that it is various and that it is by a vehicle type)
After attaching, although HID was not matched, when it compared with the NORMAL, it shone very white, and appearance also becomes good and it could utilize it as a High beam. (The photograph reference light upper part is HID, and the bottom is a PIAA Valve) Although I think how much a life is, I think that a price should be just cheap to a slight degree.

J

MB44 Extreme Force Bulb

4 oleh Japan User(translated)

Pabrikan: PIAA

Since the Low beam is using HID of a SOLAM, when a High beam continues being a Normal valve and lights up to very bright one, In order to shine in thin yellow considerably, the duty of the High beam was not fully realized and purchased this product from

Since the Low beam is using HID of a SOLAM, when a High beam continues being a Normal valve and lights up to very bright one, In order to shine in thin yellow considerably, the duty of the High beam was not fully realized and purchased this product from appearance not having been good, either.
attachment is easy and it only changes it with a Normal valve. However, although time and effort costs arriving at the place of a Valve for a while, it is not becoming pain so much. (I think that it is various and that it is by a vehicle type)
After attaching, although HID was not matched, when it compared with the NORMAL, it shone very white, and appearance also becomes good and it could utilize it as a High beam. (The photograph reference light upper part is HID, and the bottom is a PIAA Valve) Although I think how much a life is, I think that a price should be just cheap to a slight degree.

J

MB44 Extreme Force Bulb

5 oleh Japan User(translated)

Pabrikan: PIAA

The LOW Beam is set to 6000K of HID. Although HI Beam was hardly used, either, since it also seldom ran in the
night These days comes, frequency goes up and it is because of too much of the darkness. It became exchange of the Valve. It is exchan

The LOW Beam is set to 6000K of HID. Although HI Beam was hardly used, either, since it also seldom ran in the
night These days comes, frequency goes up and it is because of too much of the darkness. It became exchange of the Valve. It is exchange from super white by the
said Manufacturer. Left-hand side is HI Beam with the
photograph. Grade hardly worried if it is from the transverse plane of a car body although the color was considerably different and it is reflected. good also in a actual run, since the direction of HI Beam illuminates a long distance white (harmonic of 1000RTL2 lights) -- it feels, and it comes out and is satisfactory. Visibility also becomes good and came to be able to perform a safer run.

J

MB44 Extreme Force Bulb

5 oleh Japan User(translated)

Pabrikan: PIAA

Since it put into MT-01LoHB4HiH7Lo, it also treated Hi.
It illuminates brightly by Hi and the product and 笙ェ night journey with it rubbed and carried out are 竓?222 (^omega^) 2竓?Boone. [ bright Hi or ] [ satisfying ]

Since it put into MT-01LoHB4HiH7Lo, it also treated Hi.
It illuminates brightly by Hi and the product and 笙ェ night journey with it rubbed and carried out are 竓?222 (^omega^) 2竓?Boone. [ bright Hi or ] [ satisfying ]

J

MB44 Extreme Force Bulb

4 oleh Japan User(translated)

Pabrikan: PIAA

PIAA products are used for some time.
Although super plasma GT-X was used, the bulb has gone out.
Although the light appropriate for purple was pleasing, the extreme force of the white blue light which endures HID is purchased this time.
White

PIAA products are used for some time.
Although super plasma GT-X was used, the bulb has gone out.
Although the light appropriate for purple was pleasing, the extreme force of the white blue light which endures HID is purchased this time.
White blue light is satisfied brightly enough.
Although it is not the brightness of HID after all, it is enough for me who seldom run at night.

J

MB44 Extreme Force Bulb

4 oleh Japan User(translated)

Pabrikan: PIAA

Since it was too dark if pure, he bought it with what can be changed comparatively cheaply and simply and conveniently.
Exchange is very easy.
(It is ... although pains was taken over attachment of the half cowl of a motorcycle) Although it ran th

Since it was too dark if pure, he bought it with what can be changed comparatively cheaply and simply and conveniently.
Exchange is very easy.
(It is ... although pains was taken over attachment of the half cowl of a motorcycle) Although it ran the night journey after exchange, since it became bright compared with the original thing, it is satisfied.
If it can do, he wants HID, but a price is severe too.
since a way dark to there is not not much run -- this -- necessity -- enough!

J

MB44 Extreme Force Bulb

5 oleh Japan User(translated)

Pabrikan: PIAA

TDM850 98-year type It is a reverse vehicle.
Since Wright of normal was dark, it attached to run comfortably as much as possible at night.
Although I thought that HID was the brightest, it decided to consider a price, the time and effort of attach

TDM850 98-year type It is a reverse vehicle.
Since Wright of normal was dark, it attached to run comfortably as much as possible at night.
Although I thought that HID was the brightest, it decided to consider a price, the time and effort of attachment, etc. and to make it the easiest bulb replacement.
It is easy also in feeling to require only the replacement with normal.
In my model, H1 and H3 type are used and a mouthpiece is different by Hi/Low.
(It has written on the end of a lens) attachment is the same as other motorcycles, it is not special, and a special tool is unnecessary -- it was (the tool which removes a cowl was required).
If a side cowl is removed and a screen and a front cowl are removed, a hand will enter simply.
Although it may be necessary to remove a cowl to there, since it had to prevent from touching a glass portion, it removed and worked for the sense.
If compared with HID, it may be unsatisfactory, but tone compares with normal, or becomes and it feels it white.
Conspicuousness also improved considerably.
It is thought that especially night, an indicator, and a signboard became legible.
Although it seems that it is satisfactory at all although it is the thermal problem about which it cared for a while and is a resin lens, the trouble of becoming cloudy or melting etc. has not arisen.
There can be many runs at night or the price and work are [ but ] easy and there are a direction and the direction ... to change appearance into can recommend you.