Kembali ke atas

【TAKATSU】Mirror Adapter 1 Piece

    • Penilaian:

It purchased to height control.
if it equips -- since a design is simple -- completely -- an original manufacturer's product...

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-08-20 21:25:50
It purchased to height control.
if it equips -- since a design is simple -- completely -- an original manufacturer's product -- as if -- it is natural touch.
I think that it can equip that there is no sense of incongruity in any motorcycles.
There are also the object for the diameter change of a screw and the object for the reverse screws of a yamaha vehicle else [ for height control ], and the choice of a custom mirror spreads.
Since it is entering one piece, the place which can purchase only a required part is also a delightful point.
A price is also handy, and since it is a mirror manufacturer's goods, it can purchase in comfort.

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

J

Mirror Adapter 1 Piece

3 oleh Japan User(translated)

Pabrikan: TAKATSU

It used in order to avoid interference with the shield at the time of attaching the windshield for little cabs to a super cub, a...

It used in order to avoid interference with the shield at the time of attaching the windshield for little cabs to a super cub, and a normal blinker.
The result was exactly.
Since it is not too bad, they are three stars.

J

Mirror Adapter 1 Piece

3 oleh Japan User(translated)

Pabrikan: TAKATSU

I would like to use the mirror bought before... Since the car body to attach was a yamaha, this product was purchased.
Only ...

I would like to use the mirror bought before... Since the car body to attach was a yamaha, this product was purchased.
Only at one of the two, since height changed, it has been improved by purchasing an adapters on either side.

J

Mirror Adapter 1 Piece

3 oleh Japan User(translated)

Pabrikan: TAKATSU

After a master cylinder and clutch holder exchange, since an original manufacturer's product stopped having stuck, it purchased....

After a master cylinder and clutch holder exchange, since an original manufacturer's product stopped having stuck, it purchased.
An original manufacturer's product is not attached, if there is this [ no ] since it is a reverse screw.
Since a mirror position will become somewhat high if it attaches, back may become legible.
As long as there is no favorite mirror, there is no necessity.

J

Mirror Adapter 1 Piece

4 oleh Japan User(translated)

Pabrikan: TAKATSU

8 mm -> 8 mm was purchased for the height control of a mirror.
It becomes easy to carry out a back check, and is satisfied w...

8 mm -> 8 mm was purchased for the height control of a mirror.
It becomes easy to carry out a back check, and is satisfied with the location of the mirror having become high.

J

Mirror Adapter 1 Piece

5 oleh Japan User(translated)

Pabrikan: TAKATSU

When it is going to attach to the ape 100 the mirror attached to the former motorcycle, it is a mirror of M10! But an ape is M8!...

When it is going to attach to the ape 100 the mirror attached to the former motorcycle, it is a mirror of M10! But an ape is M8! It was that this was troubled, and ADAPURA was purchased and it corresponded.
It is cheap, and but, it carries out perfectly, and shines and there is no complaint.
The mirror which was carrying out dead storage could also be utilized and it is satisfied with favor.

J

Mirror Adapter 1 Piece

3 oleh Japan User(translated)

Pabrikan: TAKATSU

Although the DAYTONA Parallel leaf mirror was attached by substitution of the damaged pure Mirror, the Mirror adapter was attach...

Although the DAYTONA Parallel leaf mirror was attached by substitution of the damaged pure Mirror, the Mirror adapter was attached in order to earn height, since back visibility is low even if it carries out angle adjustment of being various, since height is low. There is also no sense of incongruity in particular by the difference of texture from a portion besides
, and the back field of view also became good and it has satisfied it. The Size of the hexagon-head portion of a product is 14 mm.

J

Mirror Adapter 1 Piece

5 oleh Japan User(translated)

Pabrikan: TAKATSU

It was used for Mirror breadth extension of a GSX1100S KATANA.
When normal, it was interfered by the body and right behind...

It was used for Mirror breadth extension of a GSX1100S KATANA.
When normal, it was interfered by the body and right behind could not be seen, but the extended Stay here and the
authentic positive regulating function were used, and it expanded width 3 cm of one side at a time.

J

Mirror Adapter 1 Piece

4 oleh Japan User(translated)

Pabrikan: TAKATSU

Although a pure Mirror was not needed for mind and purchased the Mirror of the external article, unsatisfactorily, height was la...

Although a pure Mirror was not needed for mind and purchased the Mirror of the external article, unsatisfactorily, height was lacking and purchased.
There is also no sense of incongruity in particular, and attachment is also end satisfaction simply.

J

Mirror Adapter 1 Piece

5 oleh Japan User(translated)

Pabrikan: TAKATSU

[a good point] --
- it is cheap.There are not
, a BALI, etc. and the quality of structure is high.Bad the

[poi...

[a good point] --
- it is cheap.There are not
, a BALI, etc. and the quality of structure is high.Bad the

[point]
and paint application are weak, and it is easy to generate rust.It is convenient when attaching the height control of the

[general comment]
and a Mirror, and a windshield.

J

Mirror Adapter 1 Piece

5 oleh Japan User(translated)

Pabrikan: TAKATSU

Although the Adapters of the Plating which was rolling in the room was used until now, since it surely floated and was visible a...

Although the Adapters of the Plating which was rolling in the room was used until now, since it surely floated and was visible and worrisome, it carried out here.
(since Mirror is Black)

former 々 both 8 mm of reverse Screws,Since the Mirror to attach is called 10 mm of right Screws, it is satisfactory at the merit of the quality which does not become as compared with the cheap article which served also as the conversion there and was rolling in room!
It is if what also carried out such accessories perfectly is used. -- The degree of

self-satisfied carries out large UP.Since the Size and a kind are abundant and quality and texture have them, it is a Recommendation! [ good ]

J

Mirror Adapter 1 Piece

3 oleh Japan User(translated)

Pabrikan: TAKATSU

Although the purpose of use was different, it used for Sutee Nakama extension of Napoleon's CROSS 2 Mirror.The overhang out of <...

Although the purpose of use was different, it used for Sutee Nakama extension of Napoleon's CROSS 2 Mirror.The overhang out of
becomes good exactly, and is a field-of-view cinch.
durability is weak and paint application just I want you to improve since paint application separates as Berry that there is nothing gradually then although it may be cheap exchanged itself in three years.

J

Mirror Adapter 1 Piece

5 oleh Japan User(translated)

Pabrikan: TAKATSU

It came to be attached to the place higher than a Reserver tank.Only improvement becomes and the degree of freedom of positionin...

It came to be attached to the place higher than a Reserver tank.Only improvement becomes and the degree of freedom of positioning of the
Navigation holder etc. is convenient.

J

Mirror Adapter 1 Piece

5 oleh Japan User(translated)

Pabrikan: TAKATSU

As the mirror base of my scooter was corroded, I estimated the cost of replacing it with an OEM part, and found out that it was ...

As the mirror base of my scooter was corroded, I estimated the cost of replacing it with an OEM part, and found out that it was going to cost me a lot!
I wandered around webike products and found this M10->M10(1870).
It's not a complicated product. All you need to do is to replace it with the original part.
The OEM part is more expensive You can order something else and make your shipping fee free of charge.
There's still no loosening, and I feel no problem with its quality.

J

Mirror Adapter 1 Piece

5 oleh Japan User(translated)

Pabrikan: TAKATSU

To the height of Mirror

When my car is wearing Mirror of normal height, Mirror is low and the back is not reflected at all.
I bought it for height adjustment of Mirror.
This item is 8 → 10 - 10 → 8 10 → 10 - Variety such as Opposite Thread Screw for Yamaha → Normal Thread Screw is abundant - I think that it is very efficient.

J

Mirror Adapter 1 Piece

5 oleh Japan User(translated)

Pabrikan: TAKATSU

It is easy to see as expected

When you attach the Back Mirror to the structure of the car body, you can see your shoulder, Mirror 1 / Although it could not be confirmed backward by only about 3, this adjustment Coupler 10 MM → 10 MM height was up by 3 CM as it was able to check backwards perfectly.
Also at Lineup Yamaha Opposite Thread Screw → Normal Thread Screw
8 MM -> 10 MM From 10 MM to 8 MM, there are various Lineup, so purchase Mirror (Diameter) For those who failed, it is also a recommendation for those who purchased UniversalMirror with Yamaha car.
Recommended for vehicles that can not be confirmed backwards.

J

Mirror Adapter 1 Piece

5 oleh Japan User(translated)

Pabrikan: TAKATSU

Backward batch

【What made you decide the purchase?】 Required item
The price is cheap, various types (diameter - Opposite Thread Screw etc) Variation can be selected.

【How was it actually used?】 Required item
After use, backward confirmation can be done firmly.

【Was it difficult to install? (Hard parts case)】 Any item
Easy. Just turn it

【Please tell me the point of installation and hang (in the case of Hard parts)】 Any item
Slowly fix to the desired height so that it does not thread obliquely, fix it with tightening Nut.

[Is there anything I was disappointed about?] Required item
There is absolutely no.

【Hope for Manufacturer - Please let me know if there are any improvement points] Required item
I think that it is convenient if there is an adjustment width of a little more height.

【Have you compared items?】 Required item
KTMPowerParts also sells parts of the same function, but here there is military presence on this product.

J

Mirror Adapter 1 Piece

5 oleh Japan User(translated)

Pabrikan: TAKATSU

As expected

【What made you decide the purchase?】
Price and function

【How was it actually used?】
You can now check backward firmly.

【Was it difficult to install? (Hard parts case)】
Easy by turning

【Please tell me the point of installation and hang (in the case of Hard parts)】
It is also possible to fit to any height.

[Is there anything I was disappointed about?]
There is none

【Hope for Manufacturer - Please let me know if you have any improvement points]
I think that the price is high.

【Have you compared items?】
There is none

[Others] Any item