- Beranda
- Ulasan Produk
- Sparepart Motor
- Suspensi / Rearset / Velg / Swingarm
- Suspensi / Shock Belakang
- Shock Belakang
- Guncangan Belakang yang Tampak Hebat dan Terjang... (MINIMOTO: Rear Shock Absorber)
【MINIMOTO】Rear Shock Absorber Review
Great Looking and Affordable Rear Shocks for the Monkey 125
About quality and texture: I am happy with the quality of this set of rear shock absorbers. Lots of chrome plated steel on these, from the shock body to the springs and then the pre-load adjusters are made from cast aluminium. About the feeling of use: To me they look much better then the Honda rear shocks and there is no doubt they perform better and this is mainly because they have heavier rated springs. Products to buy together: Some type of upgrade to the front forks would also be desirable to purchase along side these rear shock absorbers. I didn't want to go to the trouble of completely disassembling the front forks for heavier rated springs, so I just changed the fork oil to a 20w for now and it is an improvement. Difficulty of installation: The process to install takes about three quarters of an hour, 2 acorn nuts per shock and multiple wahers are all that is involved. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a suitably sprung set of rear shock absorbers that look great on the Monkey 125 in chrome and they are affordable for your average rider as compared to most of the other options here on Webike which are much more expensive. About shipping and packaging: The faster and more expensive shipping are the only option for suspension. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: If you weight less than 70kg then I think you will find the spring rate of these rear shock absorbers too high and you should checkout the ones available from Takegawa, which are also available in chrome.
Guncangan Belakang yang Tampak Hebat dan Terjangkau untuk Monyet 125
Tentang kualitas dan tekstur: Saya senang dengan kualitas set peredam kejut belakang ini. Banyak baja berlapis krom pada ini, dari badan kejut hingga pegas dan kemudian pengatur beban awal terbuat dari aluminium cor. Tentang perasaan penggunaan: Bagi saya mereka terlihat jauh lebih baik daripada shock belakang Honda dan tidak diragukan lagi performanya lebih baik dan ini terutama karena mereka memiliki pegas dengan nilai lebih berat. Produk untuk dibeli bersama: Beberapa jenis upgrade ke garpu depan juga diinginkan untuk dibeli di samping peredam kejut belakang ini. Saya tidak ingin bersusah payah membongkar garpu depan sepenuhnya untuk pegas berperingkat lebih berat, jadi saya hanya mengganti oli garpu ke 20w untuk saat ini dan ini merupakan peningkatan. Kesulitan pemasangan: Proses pemasangan memakan waktu sekitar tiga perempat jam, 2 biji biji ek per kejutan dan beberapa waher semuanya terlibat. Tidak sulit untuk dilakukan. Kinerja biaya dan perbandingan dengan produk lain: Biaya yang baik karena Anda mendapatkan satu set peredam kejut belakang yang terlihat bagus pada Monkey 125 dalam warna krom dan harganya terjangkau untuk pengendara rata-rata Anda dibandingkan dengan sebagian besar opsi lain di Webike yang jauh lebih mahal. Tentang pengiriman dan pengemasan: Pengiriman yang lebih cepat dan lebih mahal adalah satu-satunya pilihan untuk penangguhan. Webike memberi saya informasi terbaru tentang status pesanan saya hingga saat dikirimkan. Paket tiba dalam rentang tanggal yang diharapkan dan dikemas dengan baik tanpa kemungkinan ada bagian yang rusak. Kekhawatiran, peringatan, atau saran apa pun saat membeli: Jika berat Anda kurang dari 70kg maka saya pikir Anda akan menemukan tingkat pegas peredam kejut belakang ini terlalu tinggi dan Anda harus memeriksa yang tersedia dari Takegawa, yang juga tersedia dalam warna krom.
Lihat aslinya