- Beranda
- Ulasan Produk
- Sparepart Motor
- Rantai / Gear
- Sparepart Master Cylinder Kopling Lainnya
- Desain sederhana dan produk terbaik.... (PLOT: Oil Tank Bracket Clutch for S15)
【PLOT】Oil Tank Bracket Clutch for S15 Review
Simple design and the best product.
[How is it used?
The Brake Side is also made by the same PLOT. Oil tank stay Brake S50 only introduced. Part numbers are. BPS001SB It is
The clutch master cylinder is of course brembo's 19RCS. The clutch master cylinder is of course brembo 19RCS.
I was looking for something simple, low height, and black, and PLOT's Bracket was right in the middle of my criteria.
Was the one you received as per Image?
The Mount will be exactly as shown in the second product image, Mount Image! It is perfect.
Black color is paint or cation, Material is probably Stainless Steel.
Included Parts:is also all in black, so it was Exactly the XJR around the Handlebar in pure black.
Was the installation difficult?
It is not difficult to do. It comes with an illustrated Instruction Manual, so you will know immediately what to put on where.
One point is the orientation of the Bracket, but since there is no indication of which is the Tank side and which is the Master side, I was a bit confused for a moment.
How was your experience with it?
I have included a picture of the installation and it turned out to be the best Mount.
But! There is one caveat. I'm sorry I overlooked it myself...
This Bracket is made by brembo. Oil tankS15B only." This is the case
S15 "B" This is important.
The oil tank I had installed was S15A. yes, the angle of the outlet is different.
S15A→ with angled outlet
S15B→ ejector Straight
As it turns out, it did not stick. I was able to cut and install the length optimally because I also bought a new Hose.
However, the Nipple on the Master Cylinder side has become a little overloaded, so the Oil tank was removed as soon as possible. "B" We plan to change the name of the company to the one in the following table.
[Included Parts:were they on?
It is as shown in the picture. The thinner Washer was described as being for interference prevention, but I think it is too thin and will not come into play.
[Was there anything that disappointed you?
As a note, I was a little concerned about the angle of the oil tank, so I bent the bracket and the paint cracked. It is not a defect of the product or anything, but it is unavoidable because of the excessive force applied.
Desain sederhana dan produk terbaik.
[Bagaimana cara menggunakannya?
Sisi Rem juga dibuat oleh PLOT yang sama. Tinggal tangki oli Brake S50 saja yang diperkenalkan. Nomor bagian adalah. BPS001SB Itu
Silinder master kopling tentu saja brembo's 19RCS. Silinder master kopling tentu saja brembo 19RCS.
Saya sedang mencari sesuatu yang sederhana, tinggi rendah, dan hitam, dan Braket PLOT berada tepat di tengah-tengah kriteria saya.
Apakah yang Anda terima sesuai Gambar?
Mount akan persis seperti yang ditunjukkan pada gambar produk kedua, Mount Image! Sempurna.
Warna hitam adalah cat atau kation, Bahannya mungkin Stainless Steel.
Termasuk Bagian: juga serba hitam, jadi Persis XJR di sekitar Handlebar dalam warna hitam pekat.
Apakah pemasangannya sulit?
Ini tidak sulit dilakukan. Muncul dengan Instruksi Manual bergambar, sehingga Anda akan segera tahu apa yang harus diletakkan di mana.
Satu poin adalah orientasi Bracket, tapi karena tidak ada indikasi mana sisi Tank dan mana sisi Master, saya agak bingung sejenak.
Bagaimana pengalaman Anda dengannya?
Saya telah menyertakan gambar instalasi dan ternyata menjadi Mount terbaik.
Tetapi! Ada satu peringatan. Maafkan aku sendiri yang mengabaikannya...
Braket ini dibuat oleh brembo. Tangki minyak hanya S15B." Inilah masalahnya
S15 "B" Ini penting.
Tangki oli yang saya pasang adalah S15A. ya, sudut outletnya berbeda.
S15A→ dengan outlet miring
S15B→ ejektor Lurus
Ternyata, itu tidak menempel. Saya dapat memotong dan memasang panjang secara optimal karena saya juga membeli selang baru.
Namun, Nipple di sisi Master Cylinder menjadi sedikit kelebihan beban, sehingga tangki Oli segera dilepas. "B" Kami berencana untuk mengubah nama perusahaan menjadi nama di tabel berikut.
[Termasuk Bagian: apakah mereka aktif?
Itu seperti yang ditunjukkan pada gambar. Washer yang lebih tipis digambarkan sebagai pencegahan interferensi, tetapi menurut saya terlalu tipis dan tidak akan ikut bermain.
[Apakah ada sesuatu yang membuatmu kecewa?
Sebagai catatan, saya sedikit khawatir dengan sudut tangki oli, jadi saya membengkokkan braket dan catnya retak. Ini bukan cacat produk atau apa pun, tetapi tidak dapat dihindari karena penggunaan gaya yang berlebihan.