- Beranda
- Ulasan Produk
- Sparepart Motor
- Rem
- Switch Rem Hidrolik
- Inilah penyebab matinya lampu RearStop.... (ACTIVE: Pressure Switch Single)
【ACTIVE】Pressure Switch Single Review
This is the cause of RearStop-lamp non-lighting.
Motivation
After the Brake pedal was modified on my GPZ, the RearStop-lamp stopped working. The cause was that the Pressure switch was out of wiring. I purchased the Red color in stock.
Was the one you received as per Image?
No problem
Was the installation difficult?
Installation DIY process.
? First, we covered the wiring with a WiringRubber tube because the wiring would run out if the wiring from the Bolt was too thin and bare to be installed in a vehicle.
Bullet Type Terminal Installation
Replacement of banjo bolt that is out of wiring and installation of a new one.
? Caliper air removal as needed
Pedal step and Stop-lampOK
How was your experience with it?
This is the third time I have replaced the pressure switch, and I am relieved when the stop-lamp comes back on.
[Included Parts:were they on?
Supplies for the banjo bolt were included.
[Was there anything that disappointed you?
The price is too high. I don't know if it is not popular, but I bought it because Red color stock was the cheapest. As a result, I am glad that the Red color became One Point.
The wiring is very thin. The coating is also thin, so this is a durability problem and can be easily broken.
Inilah penyebab matinya lampu RearStop.
Motivasi
Setelah pedal rem dimodifikasi di GPZ saya, lampu RearStop berhenti bekerja. Penyebabnya adalah Saklar tekanan keluar dari kabel. Saya membeli warna Merah dalam stok.
Apakah yang Anda terima sesuai Gambar?
Tidak masalah
Apakah pemasangannya sulit?
Proses instalasi DIY.
? Pertama, kami menutup kabel dengan tabung WiringRubber karena kabel akan habis jika kabel dari Baut terlalu tipis dan telanjang untuk dipasang di kendaraan.
Instalasi Terminal Tipe Peluru
Penggantian baut banjo yang out of wiring dan pemasangan yang baru.
? Penghapusan udara caliper sesuai kebutuhan
Langkah pedal dan Stop-lampOK
Bagaimana pengalaman Anda dengannya?
Ini adalah ketiga kalinya saya mengganti saklar tekanan, dan saya merasa lega saat stop-lamp menyala kembali.
[Termasuk Bagian: apakah mereka aktif?
Persediaan untuk baut banjo disertakan.
[Apakah ada sesuatu yang membuatmu kecewa?
Harganya terlalu tinggi. Saya tidak tahu apakah itu tidak populer, tetapi saya membelinya karena stok warna Merah adalah yang termurah. Alhasil, saya senang warna Merah menjadi One Point.
Kabelnya sangat tipis. Lapisannya juga tipis, jadi ini masalah daya tahan dan mudah pecah.