- Beranda
- Ulasan Produk
- Sparepart Motor
- Sparepart Stang & Kemudi
- Sistem Kendali
- Penghangat Stang
- Menyegarkan di sekitar Handlebar... (KIJIMA: Grip Heater GH10)
【KIJIMA】Grip Heater GH10 Review
Sesuai: KAWASAKI ZRX1200, KAWASAKI ZR-7S, KAWASAKI ZR-7, KAWASAKI Z750S, KAWASAKI Z1000, KAWASAKI ER-6n, KAWASAKI ER-5, HONDA CBR650RA, KAWASAKI Versys 650, KAWASAKI Ninja ZX-6RR, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14, YAMAHA FZR6, YAMAHA FZ6R, YAMAHA FZ6, YAMAHA FZ10, YAMAHA FZ09, KAWASAKI Tengai, KAWASAKI ZRX1200 DAEG,
Refreshing around the Handlebar
The models used are V7special850 and ST400tempter.
The Right Grip with a built-in switch is Refreshing, and the Throttle pipe integrated with the Right Grip is good because the bond is peeled off and there is no gap, but the smallest take-up diameter available is 34mm, which is Large. The Large size is 34mm at the smallest take-up diameter, which is heavier than the 32mm that I had been using.
I think many people are pleased with the grip diameter, which is thinner than the previous ones, but it is too thin for my hand, making it difficult to ride, and the throttle is heavier due to the relationship between the rewind diameter and the grip diameter.
However, the clean look is good.
Menyegarkan di sekitar Handlebar
Model yang digunakan adalah V7special850 dan ST400tempter.
Pegangan Kanan dengan sakelar bawaan Menyegarkan, dan pipa Throttle yang terintegrasi dengan Pegangan Kanan bagus karena ikatannya terkelupas dan tidak ada celah, tetapi diameter take-up terkecil yang tersedia adalah 34mm, yang merupakan Besar. Ukuran Besar adalah 34mm dengan diameter take-up terkecil, yang lebih berat dari 32mm yang saya gunakan.
Saya rasa banyak orang yang senang dengan diameter grip yang lebih tipis dari yang sebelumnya, tapi terlalu tipis untuk tangan saya, sehingga sulit dikendarai, dan throttle lebih berat karena hubungan antara diameter mundur dan grip. diameter.
Namun, tampilan bersihnya bagus.