- Beranda
- Ulasan Produk
- Sparepart Motor
- Busi
- Sparepart Mesin
- Sparepart Pengapian
- Busi
- Plug harus berorientasi 2ValveEngine diperlukan... (NGK: MotoDX Plug CR8EDX-S 91582)
【NGK】MotoDX Plug CR8EDX-S 91582 Review
Sesuai: BENELLI VELVET125250, SUZUKI BANDIT400VZ, SUZUKI V-STROM650, SUZUKI SV650S, SUZUKI TL1000S, MALAGUTI Madison 150, MZ 125SM, MZ RT125, PIAGGIO PIAGGIO X-9 200 AMALFI, PGO J.E.V. 125Duo's, KYMCO KCR125, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HYOSUNG RT125D, HYOSUNG GV250 Acura, HYOSUNG GT250Comet, HUSABERG FE400e, HUSABERG FE501e, HUSABERG FE600e, HUSABERG MotocrossFC400,
Plug must be oriented 2ValveEngine required
Especially with 2Valve's sideways plug-in Engine, the Idol can be stabilized by centering the orientation of the Minus electrode.
The insulators will be beautifully burnt.
This plug is tightened 60 degrees after it hits according to NGK's instructions, so it is tightened for one side of the hexagon.
So, the four bottles purchased and used this time are Quantity:Only 2pcs were left.
It is a cheap item and I think this is about as good as it gets. The rest will be sold unused used.
This is loss-free.
The photo shows Marking in Pink color and the orientation of the electrode.
Plug harus berorientasi 2ValveEngine diperlukan
Terutama dengan Mesin plug-in 2Valve yang menyamping, Idol dapat distabilkan dengan memusatkan orientasi elektroda Minus.
Insulator akan terbakar dengan indah.
Steker ini dikencangkan 60 derajat setelah kena sesuai petunjuk NGK, jadi dikencangkan untuk satu sisi segi enam.
Jadi, empat botol yang dibeli dan digunakan kali ini adalah Kuantitas: Hanya tersisa 2 buah.
Ini adalah barang yang murah dan saya pikir ini sebagus yang didapat. Sisanya akan dijual tidak terpakai.
Ini bebas kerugian.
Foto menunjukkan Menandai dalam warna Merah Muda dan orientasi elektroda.