Kembali ke atas

【SP Takegawa: SP Takegawa】Compact LCD Thermometer Set (External Power Supply) (PT 1/8 Sensor)

    • Penilaian:

It purchased for water temperature management.
Since there is no troublesome changing battery and the method of cling was al...

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-09-19 20:24:23
It purchased for water temperature management.
Since there is no troublesome changing battery and the method of cling was also carefully written in order to take a power source from a battery, it was easy.
I think that visibility is not too bright too darkly and is exactly good touch.
Since it has just attached, a bad point may also still come out, but under the present circumstances, it is satisfied.

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

J

Compact LCD Thermometer Set (External Power Supply) (PT 1/8 Sensor)

4 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

There were not stopping a motorcycle, starting the engine, since it was air cooling, and notes from the person of a store about ...

There were not stopping a motorcycle, starting the engine, since it was air cooling, and notes from the person of a store about R1100S at the time of purchase.
Although many motorcycles of air cooling had also ridden until now, this was the first time that such a thing was said.
Then, it decided for the oil temperature under idling to be very worrisome in what times it becomes, and to attach an oil temperature gauge.
It is decided at the point of a price and compactness as a result of examination that it will be a compact LCD thermometer made from a takegawa.
(It did not refer to an oil temperature gauge.)
It can be found by chance and lucky.
The main part regarded as selling more if it can refer also to an oil temperature gauge should stick a magic tape on a flesh side, and should cling beside a meter panel.
A sensor attaches PT1/8 to an adapters, and exchanges it for a drain bolt.
The cord of pre-attachment was of use for sensor wiring.
A power source is connected to the socket of the small ball of DORAITO to the result of examination.
Now, in conjunction with a main switch, a thermometer is turned on.
Since it purchased with the back light, a number can be read very vividly.
Now, although it was an oil temperature of R1100S, during idling, the oil temperature goes up rapidly and it stopped the engine in the place which became 110 邃?
During a run, temperature goes up by 70 邃?~ about 80 邃?and traffic congestion until it exceeds 90 邃?
By having attached the oil temperature gauge, I can know an engine state and think that it was good.

J

Compact LCD Thermometer Set (External Power Supply) (PT 1/8 Sensor)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

It attached to 09DR650SE.
Attachment is easy and understands an oil temperature correctly.
(The oil temperature at the t...

It attached to 09DR650SE.
Attachment is easy and understands an oil temperature correctly.
(The oil temperature at the time of traffic congestion was beyond anticipation) A plus point has a small oil temperature sensor at attachment.
The main part is also satisfied very much with a compact and lighting.

J

Compact LCD Thermometer Set (External Power Supply) (PT 1/8 Sensor)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

Although others are also written, since a number is displayed greatly, it is very legible.
Even if a back light at night is ...

Although others are also written, since a number is displayed greatly, it is very legible.
Even if a back light at night is beautiful and basks in sunlight from where daytime also, it can be read clearly.
Wiring was taken from the tail so that there might be little influence, when there should have been trouble.
The earth was made into the body ground.
Although it is a uniquely uneasy point that there was no explanation of water proof and a non-watertight type anywhere, it uses believing that it is water proof.

J

Compact LCD Thermometer Set (External Power Supply) (PT 1/8 Sensor)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

[Webike Monitor] It purchased in connection with the Bore up of
RZ50. Water temperature management is important for a Bore u...

[Webike Monitor] It purchased in connection with the Bore up of
RZ50. Water temperature management is important for a Bore up. As for the worst, a Detonation occurs. This product is very legible and the Back light and the temperature change are also solid. Although it worried about whether
pure Thermostat is removed, it turned out that it is not necessary to remove, thanks to this water thermometer. It is a good product.

J

Compact LCD Thermometer Set (External Power Supply) (PT 1/8 Sensor)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

The feature of a product is as a Title. The
display is also large, and since there is no display of those other than water ...

The feature of a product is as a Title. The
display is also large, and since there is no display of those other than water temperature, it is simple and very legible. Even if
attachment also included the time of Coolant exchange, it was about 1 hour. Although he may hear that their brains are racked for the setting position of a meter body by
GPZ 900R, the Meter-unit mounting hole of a Upper cowl stay is used as a photograph, and the Crank type Angle of purchase is fixed as a Base in the Home center. The visibility which gets on by having been satisfactorily settled since the
main part was small was also good.

J

Compact LCD Thermometer Set (External Power Supply) (PT 1/8 Sensor)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

Before Trouble

There is no water temperature gauge in TENERE, and the warning light is lit up when abnormally high temperature is reached, the water temperature is not understood at all at all. Especially during low-speed GEAR driving in the forest road, the electric fan was going around and I was worried when it would be Overheat. After installing the water temperature gauge, you can understand the water temperature of the body and the state of the engine, so you can run safely.
Back light is White LED, so you can see well even at chira while driving at night.
For installation, I made my own Bracket and attached it to NavigationBracket. Temperature sensor is the same SP made by Takegawa For Water Thermometer Adapter (Φ22mm) , Using Radiator hose (Radiator entrance side) I installed it by interrupting it.
If the model does not have a water temperature gauge, we recommend installing it before Overheat or breakdown. It is quite obvious if you display the water temperature as a numerical value.

J

Compact LCD Thermometer Set (External Power Supply) (PT 1/8 Sensor)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

It's just Oil Temperature Gauge.

Attached to Monkey.
Wiring can also easily connect and satisfy visibility.
Large is not too small, too large Large is just right.
Peak hold function is also attached, but it is reset when turning off the power.

J

Compact LCD Thermometer Set (External Power Supply) (PT 1/8 Sensor)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

It's just Oil Temperature Gauge.

Attached to Monkey.
Wiring can also easily connect and satisfy visibility.
Large is not too small, too large Large is just right.
Peak hold function is also attached, but it is reset when turning off the power.

J

Compact LCD Thermometer Set (External Power Supply) (PT 1/8 Sensor)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

Before Trouble

There is no water temperature gauge in TENERE, and the warning light is lit up when abnormally high temperature is reached, the water temperature is not understood at all at all. Especially during low-speed GEAR driving in the forest road, the electric fan was going around and I was worried when it would be Overheat. After installing the water temperature gauge, you can understand the water temperature of the body and the state of the engine, so you can run safely.
Back light is White LED, so you can see well even at chira while driving at night.
For installation, I made my own Bracket and attached it to NavigationBracket. Temperature sensor is the same SP made by Takegawa For Water Thermometer Adapter (Φ22mm) , Using Radiator hose (Radiator entrance side) I installed it by interrupting it.
If the model does not have a water temperature gauge, we recommend installing it before Overheat or breakdown. It is quite obvious if you display the water temperature as a numerical value.

J

Compact LCD Thermometer Set (External Power Supply) (PT 1/8 Sensor)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

The feature of a product is as a Title. The
display is also large, and since there is no display of those other than water temperature, it is simple and very legible. Even if
attachment also included the time of Coolant exchange, it was about 1

The feature of a product is as a Title. The
display is also large, and since there is no display of those other than water temperature, it is simple and very legible. Even if
attachment also included the time of Coolant exchange, it was about 1 hour. Although he may hear that their brains are racked for the setting position of a meter body by
GPZ 900R, the Meter-unit mounting hole of a Upper cowl stay is used as a photograph, and the Crank type Angle of purchase is fixed as a Base in the Home center. The visibility which gets on by having been satisfactorily settled since the
main part was small was also good.

J

Compact LCD Thermometer Set (External Power Supply) (PT 1/8 Sensor)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

[Webike Monitor] It purchased in connection with the Bore up of
RZ50. Water temperature management is important for a Bore up. As for the worst, a Detonation occurs. This product is very legible and the Back light and the temperature change are also s

[Webike Monitor] It purchased in connection with the Bore up of
RZ50. Water temperature management is important for a Bore up. As for the worst, a Detonation occurs. This product is very legible and the Back light and the temperature change are also solid. Although it worried about whether
pure Thermostat is removed, it turned out that it is not necessary to remove, thanks to this water thermometer. It is a good product.

J

Compact LCD Thermometer Set (External Power Supply) (PT 1/8 Sensor)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

Although others are also written, since a number is displayed greatly, it is very legible.
Even if a back light at night is beautiful and basks in sunlight from where daytime also, it can be read clearly.
Wiring was taken from the tail so that the

Although others are also written, since a number is displayed greatly, it is very legible.
Even if a back light at night is beautiful and basks in sunlight from where daytime also, it can be read clearly.
Wiring was taken from the tail so that there might be little influence, when there should have been trouble.
The earth was made into the body ground.
Although it is a uniquely uneasy point that there was no explanation of water proof and a non-watertight type anywhere, it uses believing that it is water proof.

J

Compact LCD Thermometer Set (External Power Supply) (PT 1/8 Sensor)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

It attached to 09DR650SE.
Attachment is easy and understands an oil temperature correctly.
(The oil temperature at the time of traffic congestion was beyond anticipation) A plus point has a small oil temperature sensor at attachment.
The main

It attached to 09DR650SE.
Attachment is easy and understands an oil temperature correctly.
(The oil temperature at the time of traffic congestion was beyond anticipation) A plus point has a small oil temperature sensor at attachment.
The main part is also satisfied very much with a compact and lighting.

J

Compact LCD Thermometer Set (External Power Supply) (PT 1/8 Sensor)

4 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

There were not stopping a motorcycle, starting the engine, since it was air cooling, and notes from the person of a store about R1100S at the time of purchase.
Although many motorcycles of air cooling had also ridden until now, this was the first time

There were not stopping a motorcycle, starting the engine, since it was air cooling, and notes from the person of a store about R1100S at the time of purchase.
Although many motorcycles of air cooling had also ridden until now, this was the first time that such a thing was said.
Then, it decided for the oil temperature under idling to be very worrisome in what times it becomes, and to attach an oil temperature gauge.
It is decided at the point of a price and compactness as a result of examination that it will be a compact LCD thermometer made from a takegawa.
(It did not refer to an oil temperature gauge.)
It can be found by chance and lucky.
The main part regarded as selling more if it can refer also to an oil temperature gauge should stick a magic tape on a flesh side, and should cling beside a meter panel.
A sensor attaches PT1/8 to an adapters, and exchanges it for a drain bolt.
The cord of pre-attachment was of use for sensor wiring.
A power source is connected to the socket of the small ball of DORAITO to the result of examination.
Now, in conjunction with a main switch, a thermometer is turned on.
Since it purchased with the back light, a number can be read very vividly.
Now, although it was an oil temperature of R1100S, during idling, the oil temperature goes up rapidly and it stopped the engine in the place which became 110 邃?
During a run, temperature goes up by 70 邃?~ about 80 邃?and traffic congestion until it exceeds 90 邃?
By having attached the oil temperature gauge, I can know an engine state and think that it was good.

J

Compact LCD Thermometer Set (External Power Supply) (PT 1/8 Sensor)

5 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

It purchased for water temperature management.
Since there is no troublesome changing battery and the method of cling was also carefully written in order to take a power source from a battery, it was easy.
I think that visibility is not too bright

It purchased for water temperature management.
Since there is no troublesome changing battery and the method of cling was also carefully written in order to take a power source from a battery, it was easy.
I think that visibility is not too bright too darkly and is exactly good touch.
Since it has just attached, a bad point may also still come out, but under the present circumstances, it is satisfied.