Kembali ke atas

【SP Takegawa: SP Takegawa】Light Cowl Blinker Bracket (Aluminum)

    • Penilaian:

Although I thought in article that it was good, in order to have attached the nut that a screw is hard to go into the hole of st...

  • Pengulas: Japan User(translated)
  • Ditulis pada: 2007-09-19 20:26:35
Although I thought in article that it was good, in order to have attached the nut that a screw is hard to go into the hole of stay, troubles were suffered considerably.

Tanggapan

Jika ingin menanggapi komentar silakan "Masuk" dan menyelesaikan "Pendaftaran".

Ulasan lainnya

J

Light Cowl Blinker Bracket (Aluminum)

3 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

It is required in order to attach a front blinker.
Although the blinker stay of normal is cut off, it borrows in remarkable ...

It is required in order to attach a front blinker.
Although the blinker stay of normal is cut off, it borrows in remarkable Tema.
It may be better to process bending for a while by something, before attaching (there is individual specificity?) as the sag of the metal fittings which it lets pass to a front fork was insufficient.
Since the screw hole has shifted if it attaches then Since height ply on either side is also difficult, it is serious in it being unexpected. The thing which can use normal stay to a slight degree was good.

J

Light Cowl Blinker Bracket (Aluminum)

4 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

In XR100 motard, meter stay, cowl stay, and blinker stay are united.
When meters are exchanged, and meter stay is exchanged ...

In XR100 motard, meter stay, cowl stay, and blinker stay are united.
When meters are exchanged, and meter stay is exchanged for exchange or its original work, and a blinker, the components which attach a pure light cowl are needed, but probably as a ready-made article, there are only the goods here.
Since the meter was changed into the vapor panorama mater, we changed the blinker into the thing of DRC and we were making meter stay ourselves, we found it useful dramatically.
In the direction which considers the same KASUTAMU from now on, they are necessaries.

J

Light Cowl Blinker Bracket (Aluminum)

3 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

When replacing OEMFont Blinker - - -

Parts necessary for exchanging XR50's OEMFont Blinker to Takegawa's Blinker. If you open the hole around the light you can use it as it is, but it took quite a bit of effort and I purchased it.

Bracket and Material : I think that making Alink 's Blinker bracket is very good only for Takegawa, but as a prerequisite to replacing Blinker, we also have to buy it, so it is slightly higher Custom like Cost...

J

Light Cowl Blinker Bracket (Aluminum)

3 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

When replacing OEMFont Blinker - - -

Parts necessary for exchanging XR50's OEMFont Blinker to Takegawa's Blinker. If you open the hole around the light you can use it as it is, but it took quite a bit of effort and I purchased it.

Bracket and Material : I think that making Alink 's Blinker bracket is very good only for Takegawa, but as a prerequisite to replacing Blinker, we also have to buy it, so it is slightly higher Custom like Cost...

J

Light Cowl Blinker Bracket (Aluminum)

3 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

It is required in order to attach a front blinker.
Although the blinker stay of normal is cut off, it borrows in remarkable Tema.
It may be better to process bending for a while by something, before attaching (there is individual specificity?) as

It is required in order to attach a front blinker.
Although the blinker stay of normal is cut off, it borrows in remarkable Tema.
It may be better to process bending for a while by something, before attaching (there is individual specificity?) as the sag of the metal fittings which it lets pass to a front fork was insufficient.
Since the screw hole has shifted if it attaches then Since height ply on either side is also difficult, it is serious in it being unexpected. The thing which can use normal stay to a slight degree was good.

J

Light Cowl Blinker Bracket (Aluminum)

4 oleh Japan User(translated)

Pabrikan: SP Takegawa: SP Takegawa

In XR100 motard, meter stay, cowl stay, and blinker stay are united.
When meters are exchanged, and meter stay is exchanged for exchange or its original work, and a blinker, the components which attach a pure light cowl are needed, but probably as a r

In XR100 motard, meter stay, cowl stay, and blinker stay are united.
When meters are exchanged, and meter stay is exchanged for exchange or its original work, and a blinker, the components which attach a pure light cowl are needed, but probably as a ready-made article, there are only the goods here.
Since the meter was changed into the vapor panorama mater, we changed the blinker into the thing of DRC and we were making meter stay ourselves, we found it useful dramatically.
In the direction which considers the same KASUTAMU from now on, they are necessaries.