- Beranda
- Sparepart Motor
- Sparepart Mesin
- Radiator
- Sensor Suhu Oli / Cairan
- ACTIVE
- ACTIVE: Oil Pressure Sensor Adaptor
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
* Silakan lihat foto 2 tentang pemasangan untuk setiap kendaraan.
*Please check the image 2 for the compatibility with each vehicle.
[Deskripsi]
Ini adalah adaptor yang diperlukan saat memasang sensor hidrolik pada berbagai kendaraan. Ini mengubah diameter sekrup / pitch sekrup ke ukuran yang sesuai untuk dipasang di kendaraan.
Lampu peringatan menyala saat melepas sensor suhu air STD jika digunakan untuk kendaraan FI.
Ada beberapa kasus dimana mesin tidak dapat menyala tergantung pada kendaraannya.
Tidak mungkin untuk mengukur temperatur oli karena digunakan untuk melumasi kopling dan misi jika menggunakan kendaraan 2 siklus.
Harap berhati-hati agar kabel sensor tidak menyentuh bagian di mana suhu sistem pembuangan dan mesin dll. tinggi.
Perlu memperhatikan jenis kendaraan yang akan dikeluarkan dari baut pembuangan.
Harap jangan menggantinya dengan sensor kit ini karena akan menghentikan kipas agar tidak beroperasi dengan benar jika sensor STD juga berfungsi sebagai sakelar kipas. This adapter is required for the installation of oil pressure sensors in various vehicles.Converts the screw diameter and pitch to the appropriate size for the installed vehicle.
・In the case of injection vehicles, the warning light will come on as the stock water temperature sensor is removed.
Depending on the vehicle, the engine may not start.
・In the case of 2-stroke vehicles, oil temperature cannot be measured because oil is used to lubricate the clutch and transmission.
・Please make sure that the wiring of the sensor does not come into contact with high temperature parts such as the exhaust and engine.
Particular attention should be paid to the model which requires to take wires from the drain bolt.
・If the stock sensor also serves as the fan switch, since the fan will not operate properly,
Do not replace the sensor in this kit.
Lampu peringatan menyala saat melepas sensor suhu air STD jika digunakan untuk kendaraan FI.
Ada beberapa kasus dimana mesin tidak dapat menyala tergantung pada kendaraannya.
Tidak mungkin untuk mengukur temperatur oli karena digunakan untuk melumasi kopling dan misi jika menggunakan kendaraan 2 siklus.
Harap berhati-hati agar kabel sensor tidak menyentuh bagian di mana suhu sistem pembuangan dan mesin dll. tinggi.
Perlu memperhatikan jenis kendaraan yang akan dikeluarkan dari baut pembuangan.
Harap jangan menggantinya dengan sensor kit ini karena akan menghentikan kipas agar tidak beroperasi dengan benar jika sensor STD juga berfungsi sebagai sakelar kipas. This adapter is required for the installation of oil pressure sensors in various vehicles.Converts the screw diameter and pitch to the appropriate size for the installed vehicle.
・In the case of injection vehicles, the warning light will come on as the stock water temperature sensor is removed.
Depending on the vehicle, the engine may not start.
・In the case of 2-stroke vehicles, oil temperature cannot be measured because oil is used to lubricate the clutch and transmission.
・Please make sure that the wiring of the sensor does not come into contact with high temperature parts such as the exhaust and engine.
Particular attention should be paid to the model which requires to take wires from the drain bolt.
・If the stock sensor also serves as the fan switch, since the fan will not operate properly,
Do not replace the sensor in this kit.
Peringatan
* Ini tidak dapat digunakan untuk sensor suhu Ver. 2
*This product cannot be used with the temperature sensor Ver2.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/