Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
[Deskripsi]
Jenis: 35 °.
[Ukuran] L: 196, B1: 25, B2: 53, T: 9
[Berat] 145g
Jenis: 80 °.
[Ukuran] L: 196, B1: 25, B2: 53, T: 9
[Berat] 145g
Mengunci Klip Penarik Pin (dengan klip: diameter poros 5 ~ 10)
Mudah ditarik (membuka kunci) pin kunci klip itu.
Setelah mencabut pin pengunci, klipnya sendiri dapat ditarik keluar ..
Pencabutan dan penyisipan sumbu klip dengan mudah saat dipasang di bodi ..
Bentuk ujung untuk mencegah kerusakan pada klip.
Ujung bersudut untuk mencegah goresan pada badan dan lapisan.
Ujung klip ditandai dengan panah untuk memudahkan penyelarasan. Melepas klip plastik yang digunakan untuk bumper depan dan belakang serta liner spatbor depan, dll., Serta menarik dan memasukkan poros saat dipasang .. ■ Type: 35°
[Size] L: 196, B1: 25, B2: 53, T: 9
[Weight] 145g
■ Type: 80°
[Size] L: 196, B1: 25, B2: 53, T: 9
[Weight] 145g
Lock pin pull-out type resin clip (When clip is installed.)Shaft diameter 5 to 10)
The locking pin of the clip can be easily pulled out (unlocked).
After the lock pin is pulled out, the clip body can be pulled out.
When attaching the clip to the body, the clip shaft can be easily retracted and inserted.
Tip shape to prevent scratching the clip.
The tip is angled to prevent scratches on the body and lining.
The tip is marked with an arrow for easy alignment with the clip.Shrinkage and insertion of the shaft when removing and installing resin clips used in front and rear bumpers and front fender liners of automobiles.
[Ukuran] L: 196, B1: 25, B2: 53, T: 9
[Berat] 145g
Jenis: 80 °.
[Ukuran] L: 196, B1: 25, B2: 53, T: 9
[Berat] 145g
Mengunci Klip Penarik Pin (dengan klip: diameter poros 5 ~ 10)
Mudah ditarik (membuka kunci) pin kunci klip itu.
Setelah mencabut pin pengunci, klipnya sendiri dapat ditarik keluar ..
Pencabutan dan penyisipan sumbu klip dengan mudah saat dipasang di bodi ..
Bentuk ujung untuk mencegah kerusakan pada klip.
Ujung bersudut untuk mencegah goresan pada badan dan lapisan.
Ujung klip ditandai dengan panah untuk memudahkan penyelarasan. Melepas klip plastik yang digunakan untuk bumper depan dan belakang serta liner spatbor depan, dll., Serta menarik dan memasukkan poros saat dipasang .. ■ Type: 35°
[Size] L: 196, B1: 25, B2: 53, T: 9
[Weight] 145g
■ Type: 80°
[Size] L: 196, B1: 25, B2: 53, T: 9
[Weight] 145g
Lock pin pull-out type resin clip (When clip is installed.)Shaft diameter 5 to 10)
The locking pin of the clip can be easily pulled out (unlocked).
After the lock pin is pulled out, the clip body can be pulled out.
When attaching the clip to the body, the clip shaft can be easily retracted and inserted.
Tip shape to prevent scratching the clip.
The tip is angled to prevent scratches on the body and lining.
The tip is marked with an arrow for easy alignment with the clip.Shrinkage and insertion of the shaft when removing and installing resin clips used in front and rear bumpers and front fender liners of automobiles.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/