- Beranda
- Sparepart Motor
- Knalpot
- DB Killer
- Auto Magic
- Auto Magic: Peredam Knalpot 200mm (Panjang)
Peredam Knalpot 200mm (Panjang)
- Nomor produk: BF60W/M-L200
-
- IN STOCK
- Out Stock
- Auto Magic
- |
- 4.4
- (8 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Ukuran M Dinding W.
Turunkan sekitar 5-9%. Suara. M size of W wall
5-9% muffling or toning
Turunkan sekitar 5-9%. Suara. M size of W wall
5-9% muffling or toning
[Deskripsi]
Kurangi sekitar 5-9% Suara
* Segera setelah memasang yang baru, panas dari knalpot membakar resin karena wol kaca dikeraskan dengan resin ..
1. Pipa berlubang telah diperpanjang dari penyekat bagian dalam konvensional ke bagian dalam peredam ..
2. Muncul dalam dua panjang yang berbeda, 100mm dan 200mm, yang masuk ke sisi peredam ..
3. Sekat dalam ukuran M konvensional telah meningkatkan efisiensi gas buang dengan rasa torsi, meningkatkan efisiensi bahan bakar, dan suara retak, tetapi tidak memenuhi harapan semua orang dalam hal insulasi suara.. Tipe Panjang baru efektif dalam hal kualitas dan volume suara ..
[Petunjuk pemasangan baffle bagian dalam]
Tersedia sebagai tipe sambungan pegas.
Itu diperbaiki antara peredam dan pipa ekor ..
Juga, sumbat penyekat bagian dalam di ujung knalpot (satu bagian besar)
Dan itulah yang membuat mereka tidak masuk ..
Hanya tersedia untuk φ60mm.
Ini adalah indikasi diameter luar pipa ekor.
Jarak bebasnya minus 3mm.
Jika untuk diameter 60mm, maka diameter bagian yang masuk adalah 57mm ..
Bagian stopper (Panjang 3mm) memiliki diameter luar 60mm ..
(φ54 / φ50 bagian sama untuk φ54 / φ50 dengan minus φ3mm di dalam)
5-9% muffling or toning
*When you install a new one, the glass wool is hardened by resin, and the resin is burned by the heat of the exhaust. During this time, smoke is produced for a short time.
1. The inner baffle has been extended to the inner side of the silencer.
2. The length of the silencer side is also available in two types, 100mm and 200mm.
3. The conventional inner baffle M size has shown improvement of exhaust efficiency such as the torque feeling, improvement in fuel consumption, and improvement of the broken sound, but it has not been able to meet expectations on noise reduction.The new Long Type is effective in terms of sound quality and volume.
[Inner baffle installation instructions]
Available in spring joint type.
It is attached between the silencer and the tail pipe.
Also, the inner baffle stopper (larger part) on the tail pipe end
prevents it from falling in.
This product is only available for Φ60.
This is the outer diameter of the tail pipe
It has a clearance of -3mm
For Φ60, the part that goes inside has a thickness of Φ57.
The outer diameter of the stopper part (length 3mm) is Φ60.
(The part that goes inside for Φ54/Φ50 is also the same Φ3mm less)
Catatan
Yoshimura-MJN / Ini adalah adaptor untuk memasang filter ke karburator TMRDengan adaptor tipe pertukaran corong konvensional, karena jet udara pilot berada di sisi bawah lubang utama, tidak mungkin untuk melewatkan udara yang melewati filterUntuk alasan itu ada kekhawatiran pilot air jet dll. Adaptor filter TMR Yoshimura memiliki jalur jet udara pilot di bagian bawah sehingga sistem utama / Kami menutupi kedua sistem pilot Dengan menutupi, mencegah debu dan sistem utama / Setiap sistem pilot dapat menghirup udara resistansi yang sama Daftar Bagian
Other types are here.
Peringatan
* Pipa ekor adalah pipa di antara bagian pengumpul dan peredam suara.
* Bagian sambungan antara tail pipe dan silencer belum tentu berbentuk bulat.
* Nilai numerik diameter dalam dari port penyisipan sisi peredam tergantung pada pabrikan.
* Penutup penyekat pada sambungan tipe flensa (Plat & jenis memperbaiki baut) mungkin tidak tertangkap dan mungkin tidak mungkin untuk dipasang.
* Seperti megafon KERKER, ada kasus di mana sambungan tidak dijepit di pita dan sumbat penyekat tidak tersangkut dan tidak dapat dipasang.
*The tail pipe refers to the pipe between the merge collector and the silencer.
*The joint between the tail pipe and the silencer is not always a perfect circle.
*The inside diameter of the inlet on the silencer side varies from manufacturer to manufacturer.
*For flange type joint (plate & bolted),
the baffle stopper may not be able to be clamped.
*In cases where the joint is secured using a band, similar to KERKER megaphones,
the baffle stopper may not be able to be clamped.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/