- Beranda
- Sparepart Motor
- Knalpot
- DB Killer
- TSUKIGI RACING
- TSUKIGI RACING: Peredam Knalpot
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
untuk Φ # 934; 60 Panjang
[Material] Steel
[Size]
・Outer diameter: Ф60.5
・Inner diameter: Φ32
[Size]
・Outer diameter: Ф60.5
・Inner diameter: Φ32
[Deskripsi]
End baffle for Φ60.5.
Can also be used for Φ100 x 300/Φ100 x 400. End baffle for Φ60.5.
Can also be used for Φ100 x 300/Φ100 x 400.
Can also be used for Φ100 x 300/Φ100 x 400. End baffle for Φ60.5.
Can also be used for Φ100 x 300/Φ100 x 400.
Catatan
* Untuk produk TSUKIGI
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
*This product is included with the purchase of silencer size Φ100 x 500 / Φ115 x 480.
*There may be changes in product specifications due to the manufacturer's reasons.
*Regarding the position of the screw holes
As installing it onto the silencer made by Tsukigi Racing (repair etc.), the position of the installation hole is different between the current model and the previous model.
As the silencer is attached to the vehicle and viewed from the rear, if the mounting hole is directly underneath, it is a current model.
If the mounting hole is slightly inside the vehicle (diagonally down to the left), it is an earlier model.
*This product is included with the purchase of silencer size Φ100 x 500 / Φ115 x 480.
*There may be changes in product specifications due to the manufacturer's reasons.
*Regarding the position of the screw holes
As installing it onto the silencer made by Tsukigi Racing (repair etc.), the position of the installation hole is different between the current model and the previous model.
As the silencer is attached to the vehicle and viewed from the rear, if the mounting hole is directly underneath, it is a current model.
If the mounting hole is slightly inside the vehicle (diagonally down to the left), it is an earlier model.
*There may be changes in product specifications due to the manufacturer's reasons.
*Regarding the position of the screw holes
As installing it onto the silencer made by Tsukigi Racing (repair etc.), the position of the installation hole is different between the current model and the previous model.
As the silencer is attached to the vehicle and viewed from the rear, if the mounting hole is directly underneath, it is a current model.
If the mounting hole is slightly inside the vehicle (diagonally down to the left), it is an earlier model.
*This product is included with the purchase of silencer size Φ100 x 500 / Φ115 x 480.
*There may be changes in product specifications due to the manufacturer's reasons.
*Regarding the position of the screw holes
As installing it onto the silencer made by Tsukigi Racing (repair etc.), the position of the installation hole is different between the current model and the previous model.
As the silencer is attached to the vehicle and viewed from the rear, if the mounting hole is directly underneath, it is a current model.
If the mounting hole is slightly inside the vehicle (diagonally down to the left), it is an earlier model.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/