- Beranda
- Motor
- YAMAHA 401 - 750cc
- SR500
- Sparepart Motor
- Kelistrikan
- Indikator / Alat Ukur
- Bracket Speedometer / Tachometer
- Freak's PIT
- Freak's PIT: Bracket Speedometer OEM Tipe Extra Tebal Ver. III
Bracket Speedometer OEM Tipe Extra Tebal Ver. III
- Nomor produk: W-1580-015
-
- IN STOCK
- Out Stock
- Freak's PIT
- |
- 4.6
- (5 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Warna: Aluminum buffing
Ketebalan: 6mm Color: Aluminum buffing
Thickness: 6 mm
Ketebalan: 6mm Color: Aluminum buffing
Thickness: 6 mm
[Deskripsi]
Ini untuk orang yang ingin memasang pengukur stok rendah.. Ini adalah pengukur tebal asli Freaks Pit tipe tinggal tipe ver III ..
Garis tangki dan jok sangat penting untuk model Sepahan, tetapi pengukur stok tidak bisa membantu tetapi menonjol di atas jembatan atas.. Penahan ini dapat dipasang di sisi atas dan bawah jembatan atas, dan karena perbedaan sudut tikungan, alat pengukur tidak akan terlalu banyak diangkat dan tidak akan mempengaruhi garis dari lampu depan ke kursi. .
Juga, Anda hampir tidak dapat melihat sisa-sisa dari atas.. Tulang rusuk di tengah terlihat seperti mengambang ..
* Lampu depan tetap perlu diganti. This is for those who want to mount the stock meter lower.Freaks Pit Original Meter Bracket Ultra Thick Type ver III.
The line of the tank and the seat is very important for the Clip-on Handlebar specification, but the stock meter sticks out above the top bridge.This bracket can be used on either the upper or lower side of the top bridge, and due to the different bending angle, the meter will not be lifted up too much and will not break the line from the headlight to the seat.
The bracket is hardly visible when viewed from above.The center rib looks like it's floating.
*Headlight bracket must be replaced
Garis tangki dan jok sangat penting untuk model Sepahan, tetapi pengukur stok tidak bisa membantu tetapi menonjol di atas jembatan atas.. Penahan ini dapat dipasang di sisi atas dan bawah jembatan atas, dan karena perbedaan sudut tikungan, alat pengukur tidak akan terlalu banyak diangkat dan tidak akan mempengaruhi garis dari lampu depan ke kursi. .
Juga, Anda hampir tidak dapat melihat sisa-sisa dari atas.. Tulang rusuk di tengah terlihat seperti mengambang ..
* Lampu depan tetap perlu diganti. This is for those who want to mount the stock meter lower.Freaks Pit Original Meter Bracket Ultra Thick Type ver III.
The line of the tank and the seat is very important for the Clip-on Handlebar specification, but the stock meter sticks out above the top bridge.This bracket can be used on either the upper or lower side of the top bridge, and due to the different bending angle, the meter will not be lifted up too much and will not break the line from the headlight to the seat.
The bracket is hardly visible when viewed from above.The center rib looks like it's floating.
*Headlight bracket must be replaced
Peringatan
*Foto instalasi hanya untuk referensi.
*Tidak termasuk body speedometer. *The product in the image is for installation image.
*The meter itself is not included.
*Requires headlight bracket replacement.
*Not compatible with vehicles equipped with immobilizer.
*There may be changes in product specifications due to the manufacturer's reasons.
*Tidak termasuk body speedometer. *The product in the image is for installation image.
*The meter itself is not included.
*Requires headlight bracket replacement.
*Not compatible with vehicles equipped with immobilizer.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/