Kembali ke atas

【SP Takegawa: SP Takegawa】Shockbreaker Belakang Aluminium (Proses Cutting)

Harga: IDR 8,193,401

*Termasuk PPN 10%
Webike Points: 81,934 pts

Shipping point: 55 pts ( 55 pts x 1qty)
Ubah
DKI Jakarta, Jakarta Selatan, Cilandak
Biaya pengiriman
IDR 54,000

    • Nomor Produk:
    • 06-04-0038

Mohon tunggu...


Model yang Sesuai:

LITTLE CUB (AA01-3000001-3999999)
CUB90 (HA02-2800001-)
CUB (C50-9000000-)
Lihat lebih lanjut

Spesifikasi:

semi Penyesuaian : Adjustable dari panjang set awal ke sisi kompresi di kisaran 27mm
semi Warna : hitam Cat
Damping Angkatan Penyesuaian : Ini tersedia untuk sisi ekstensi penyesuaian 18 tahap.
panjang bebas : penyesuaian stepless antara pemasangan lapangan lubang 320mm - 340mm Lihat lebih lanjut

Rincian Produk

Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik Show Original

[Spesifikasi]

semi Penyesuaian : Adjustable dari panjang set awal ke sisi kompresi di kisaran 27mm
semi Warna : hitam Cat
Damping Angkatan Penyesuaian : Ini tersedia untuk sisi ekstensi penyesuaian 18 tahap.
panjang bebas : penyesuaian stepless antara pemasangan lapangan lubang 320mm - 340mm

[Deskripsi]


■ rincian
Merupakan formula peredam Minyak Rear shock absorber yang mengadopsi tingkat musim semi memberikan kenyamanan ke Long berkuda. Ini mengadopsi Aluminium Cut-out Tubuh, selesai dengan finish mewah dengan Gunmetal alumite.
Semi mengadopsi dua tahap PitchSpring untuk perbaikan kenyamanan. operasi awal yang lembut, hal ini menunjukkan kemampuan pelacakan menurut perubahan kecepatan dan kondisi permukaan jalan. Spring Set panjang, sisi ekstensi redaman kekuatan, tinggi disesuaikan dengan mengubah panjang gratis, Anda dapat menyesuaikan sesuai dengan bidang yang berjalan.
semi Penyesuaian : Adjustable dari panjang set awal ke sisi kompresi di kisaran 27 mm. Sesuaikan Nut dari jenis yang tidak membutuhkan Lock nut diadopsi. Semi kerah hitam cat.
Damping Angkatan Penyesuaian : sisi ekstensi penyesuaian 18-Tahapan mungkin. Mudah penyesuaian oleh Dial.
panjang bebas : Bisa disesuaikan steplessly antara lubang mounting pitch 320 mm - 340 mm. Dengan Notch dari 5 Interval mm sebagai ukuran jumlah gerakan.
instalasi simultan lengan ayun Normal atau Aluminium Swingarm dibuat oleh SP Takegawa mungkin.

[Catatan]


* SP tidak dapat diinstal bersamaan dengan penjaga rantai Aluminium dibuat oleh Takegawa.
* Ketika mengatur ketinggian kendaraan, perlu untuk menghapus shock belakang dari kendaraan.
* Rear kejutan Ketika menyesuaikan setiap bagian, silakan cek berbagai penyesuaian dan menyesuaikan dalam jangkauan.
* Karena rantai drive dapat mengganggu jumlah T dari sproket didorong, setelah pemasangan shock belakang, pastikan untuk melakukan pekerjaan cek sebelum menjalankan.
* Ketika menyesuaikan musim semi, pastikan untuk memperbaiki mur pengunci penyesuaian tinggi dengan kunci inggris dan menyesuaikan. Kecuali itu adalah tetap, musim semi dan tubuh memutar bersama-sama, dan hanya panjang penuh akan meregangkan.

Model yang Sesuai

    • LITTLE CUB (AA01-3000001-3999999)
    • CUB90 (HA02-2800001-)
    • CUB (C50-9000000-)
    • CUB90 (HA02-2200001-)
    • CUB90 (HA02-2500001-)
  • 4.5

    16 Ulasan

  • 5

    Sangat baik

    8

    4

    Baik

    8

    3

    Sedang

    0

    2

    Buruk

    0

    1

    Buruk

    0
  • Tulis Ulasan
  • I am satisfied..

    2017/10/25

    by Japan User(translated)
    It is being installed in the 2007 formula CUB 90 DX.【What made you decide the purchase?】Dumping Adjustable point【How was it actually used?】Spring is somewhat soft, but Cover is done with Dumping adjustment.I used four kinds of Rear suspension of Other Company Product, but I feel that it is the most balanced product.There is a depth of pocket where you can cooperate steadily on the street and pass. By being able to adjust Dumping, I was able to find a point that I am comfortable with.City riding : Good step and gap absorbability and convergence are goodPass : The Plus, you can enjoy Corner with a sense of high ground feeling without feeling of stiffness and uneasiness that was made by other companies.【Was it difficult to install? (Hard parts case)】Personally it is easy. Because CUB has Center Stand, I did not feel any difficulty.【Please tell me the point of installation and hang (in the case of Hard parts)】Although it is natural, although it is easy to install, the handling Instruction Manual let's work after reading with chitin.A sharp point on the Aluminum Cut-out part (Initial adjustment section) There is a problem, injury requires attention.[Is there anything I was disappointed about?]There is none. Quality of products themselves are also Large and Changeless.【Hope for Manufacturer - Please let me know if you have any improvement points]If you offer Springs with different firmness separately, I'm happy I am happy..【Have you compared items?】330 mm made by SHIFT UPModernWorks 325 mmYSS Top Top 340 mmSP Takegawa Aluminum Cut-out 325 mm (Dumping unadjustable type)Although SHIFT UP made cheaply but it is also difficult to throw away, the military feathers went up in this time made by Mukawa for the dumping adjustment possible.[Others] Any
  • I am satisfied..

    2017/10/25

    by Japan User(translated)
    It is being installed in the 2007 formula CUB 90 DX.【What made you decide the purchase?】Dumping Adjustable point【How was it actually used?】Spring is somewhat soft, but Cover is done with Dumping adjustment.I used four kinds of Rear suspension of Other Company Product, but I feel that it is the most balanced product.There is a depth of pocket where you can cooperate steadily on the street and pass. By being able to adjust Dumping, I was able to find a point that I am comfortable with.City riding : Good step and gap absorbability and convergence are goodPass : The Plus, you can enjoy Corner with a sense of high ground feeling without feeling of stiffness and uneasiness that was made by other companies.【Was it difficult to install? (Hard parts case)】Personally it is easy. Because CUB has Center Stand, I did not feel any difficulty.【Please tell me the point of installation and hang (in the case of Hard parts)】Although it is natural, although it is easy to install, the handling Instruction Manual let's work after reading with chitin.A sharp point on the Aluminum Cut-out part (Initial adjustment section) There is a problem, injury requires attention.[Is there anything I was disappointed about?]There is none. Quality of products themselves are also Large and Changeless.【Hope for Manufacturer - Please let me know if you have any improvement points]If you offer Springs with different firmness separately, I'm happy I am happy..【Have you compared items?】330 mm made by SHIFT UPModernWorks 325 mmYSS Top Top 340 mmSP Takegawa Aluminum Cut-out 325 mm (Dumping unadjustable type)Although SHIFT UP made cheaply but it is also difficult to throw away, the military feathers went up in this time made by Mukawa for the dumping adjustment possible.[Others] Any
  • Suspension is important!

    2017/03/11

    by Japan User(translated)
    I exchanged with OEM Rear suspension of DAX.Damper installation Pitch, OEM 330 mm, this product will be shorter by 325 mm and 5 mmWe selected this product from 3 types of shape that does not interfere with Chain cover, being Red Spring!, Being made by Mukawa..Because it is for CUB, compared to DAXOEM, the thickness of the upper and lower attachment parts will be thinnerWe purchased eight Stainless washers with inner diameter 12 mm and 10 mm, thickness 2 mm at Cars HomeAdjusting the mounting position by matching actual items.Since it was finely position adjustable with Washer, it was able to install without interfering with Chain cover and Exhaust System.Where the total length is shortened, by multiplying Pre-road by about 12 mm,I was able to maintain about the same height as OEMDamper.I tried running and felt that OEM's just Spring (And it is rather hard) It wasI understand.Corner's sense of stability is different as it will call Decoration Boko on the road surface.Aluminum body & Red Spring also matches Color of car body,It was good to purchase.Oh yeah, this is the Screw diameter of the mounting part of DamperSince the top was 12 mm and the bottom was 10 mm and it was the same as OEM of DAX,Color exchange was unnecessary.
  • Suspension is important!

    2017/03/11

    by Japan User(translated)
    I exchanged with OEM Rear suspension of DAX.Damper installation Pitch, OEM 330 mm, this product will be shorter by 325 mm and 5 mmWe selected this product from 3 types of shape that does not interfere with Chain cover, being Red Spring!, Being made by Mukawa..Because it is for CUB, compared to DAXOEM, the thickness of the upper and lower attachment parts will be thinnerWe purchased eight Stainless washers with inner diameter 12 mm and 10 mm, thickness 2 mm at Cars HomeAdjusting the mounting position by matching actual items.Since it was finely position adjustable with Washer, it was able to install without interfering with Chain cover and Exhaust System.Where the total length is shortened, by multiplying Pre-road by about 12 mm,I was able to maintain about the same height as OEMDamper.I tried running and felt that OEM's just Spring (And it is rather hard) It wasI understand.Corner's sense of stability is different as it will call Decoration Boko on the road surface.Aluminum body & Red Spring also matches Color of car body,It was good to purchase.Oh yeah, this is the Screw diameter of the mounting part of DamperSince the top was 12 mm and the bottom was 10 mm and it was the same as OEM of DAX,Color exchange was unnecessary.
  • Moistly effective Damper. This is the suspension!

    2016/05/11

    by Japan User(translated)
    I was disgusted by the bad ride of OEMRear suspension and made the most valuable price evaluation.The result is, it is the best !!To soft Spring that firmly has a waist, moist Damper. This is the suspension!Firmly absorbed against steps, vertically converged instantly.The stiffness worked, Cornering performance also improved.And "Quantity near the highest speed : Pair (for Left and Right) Fure "also ceases to occur for some reason.The price is a bit expensive, but it was more satisfying.Better buying this is absolutely better than buying cheap suspension 2 or 3! Recommendation!
16 Ulasan Lihat semua

Produk Teratas

【YAMAHA】Performance Damper
Performance Damper YAMAHA
【OHLINS】Rear Suspension Legend/Twin
Rear Suspension Legend/Twin OHLINS
【SP Takegawa: SP Takegawa】Sub Damper Kit for Standard Front Fork
Sub Damper Kit for Standard Front Fork SP Takegawa: SP Takegawa
【DAYTONA】Aluminum Rear Shock
Aluminum Rear Shock DAYTONA
【YSS】Rear Shock [G Sports]
Rear Shock [G Sports] YSS
【SP Takegawa: SP Takegawa】Aluminum Cut-out Rear Shock Absorber
Aluminum Cut-out Rear Shock Absorber SP Takegawa: SP Takegawa
【OHLINS】Upright Front Fork RWU
Upright Front Fork RWU OHLINS
【SP Takegawa: SP Takegawa】Rear Shock Absorber
Rear Shock Absorber SP Takegawa: SP Takegawa
【SP Takegawa: SP Takegawa】Rear Shock Absorber
Rear Shock Absorber SP Takegawa: SP Takegawa
【SP Takegawa: SP Takegawa】Rear Shock Absorber 330mm
Rear Shock Absorber 330mm SP Takegawa: SP Takegawa
【DAYTONA】Adjustable Rear Shock
Adjustable Rear Shock DAYTONA
【YSS】Rear Shock [G Series]
Rear Shock [G Series] YSS
【KITACO】Shock Absorber
Shock Absorber KITACO
【KITACO】Front Fork Spring
Front Fork Spring KITACO
【SP Takegawa: SP Takegawa】Aluminum Cut-out Rear Shock Absorber
Aluminum Cut-out Rear Shock Absorber SP Takegawa: SP Takegawa
【YAMAHA】Performance Damper
Performance Damper YAMAHA