- Beranda
- Motor
- KAWASAKI 751 - 1000cc
- Z1000R (KZ1000R)
- Sparepart Motor
- Sparepart Mesin
- Mesin
- Breather Cover / Breather Cap
- SPEED SHOP ITO
- SPEED SHOP ITO: Breather Cover
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
dengan 2 jenis O-ring
[Kendaraan yang Sesuai]
Mesin Seri Z1000R
Mesin Seri ZAPPER
ZEPHYR 400, ZRX400 2 types of O-rings included
[Compatible vehicle models]
Z1000R series engine
Zapper system engine
Zephyr 400
[Kendaraan yang Sesuai]
Mesin Seri Z1000R
Mesin Seri ZAPPER
ZEPHYR 400, ZRX400 2 types of O-rings included
[Compatible vehicle models]
Z1000R series engine
Zapper system engine
Zephyr 400
[Deskripsi]
Suku Cadang Asli Kawasaki 14070-1010 Black Breather Cover, 14070-1077 Silver Breather Cover
Bagian ini dibuat dengan memproses bagian attachment selang dari Z1000J, Z1000J, GPz1100 / 750 baru, dll., Dari kira-kira meruncing 16mm sampai 12mm ..
Bagian belakang disetel pada 13 mm untuk mencegah pita selang terlepas dan untuk memastikan bahwa pita selang telah terpasang ..
Proses yang sama tersedia untuk 14mm (Bagian pengembalian 15mm).. Silakan tentukan.
Jika Anda memiliki mesin perak, seperti Zephyr 750, gunakan 14070-1077 untuk lapisan perak ..
Silakan pilih sesuai dengan referensi Anda.
Apakah Anda pernah melepas karburator dan memasang selang nafas berdiameter internal 16mm, dan kemudian benar-benar hilang?
Saya curiga karena dibuat dengan cara menuang aluminium dan harus meruncing saat ditarik keluar dari cetakan ..
Biasanya ini tidak akan menjadi masalah, tetapi jika lepas saat peredam dipasang, efeknya hilang ..
Ini juga mencegah pewarnaan dari minyak nafas.
KAWASAKI Stock Parts 14070-1010 Black Breather Cover, 14070-1077 Silver Breather Cover
About these parts, the hose attachment part of the new breather cover of Z1000J, Z1000J, GPZ1100 / 750, etc. was processed from 16mm to 12mm of the tapered shape.
The return portion is set at 13mm to prevent the hose from falling out and to allow the hose band to be attached.
14mm (15mm at the return) is also available by the same process.Please specify.
For silver engines such as Zephyr 750, use 14070-1077 for silver finish.
Please choose your favorite.
Have you ever had the experience of removing the air cleaner and installing a 16mm inner diameter breather hose when replacing the carburetor?
This is because it is made of cast aluminum and cannot be removed from the mold unless it is tapered.
Normally, it will not be a problem, but when the reducer is installed, it will be ineffective if it comes loose.
It also prevents contamination by breather oil.
Bagian ini dibuat dengan memproses bagian attachment selang dari Z1000J, Z1000J, GPz1100 / 750 baru, dll., Dari kira-kira meruncing 16mm sampai 12mm ..
Bagian belakang disetel pada 13 mm untuk mencegah pita selang terlepas dan untuk memastikan bahwa pita selang telah terpasang ..
Proses yang sama tersedia untuk 14mm (Bagian pengembalian 15mm).. Silakan tentukan.
Jika Anda memiliki mesin perak, seperti Zephyr 750, gunakan 14070-1077 untuk lapisan perak ..
Silakan pilih sesuai dengan referensi Anda.
Apakah Anda pernah melepas karburator dan memasang selang nafas berdiameter internal 16mm, dan kemudian benar-benar hilang?
Saya curiga karena dibuat dengan cara menuang aluminium dan harus meruncing saat ditarik keluar dari cetakan ..
Biasanya ini tidak akan menjadi masalah, tetapi jika lepas saat peredam dipasang, efeknya hilang ..
Ini juga mencegah pewarnaan dari minyak nafas.
KAWASAKI Stock Parts 14070-1010 Black Breather Cover, 14070-1077 Silver Breather Cover
About these parts, the hose attachment part of the new breather cover of Z1000J, Z1000J, GPZ1100 / 750, etc. was processed from 16mm to 12mm of the tapered shape.
The return portion is set at 13mm to prevent the hose from falling out and to allow the hose band to be attached.
14mm (15mm at the return) is also available by the same process.Please specify.
For silver engines such as Zephyr 750, use 14070-1077 for silver finish.
Please choose your favorite.
Have you ever had the experience of removing the air cleaner and installing a 16mm inner diameter breather hose when replacing the carburetor?
This is because it is made of cast aluminum and cannot be removed from the mold unless it is tapered.
Normally, it will not be a problem, but when the reducer is installed, it will be ineffective if it comes loose.
It also prevents contamination by breather oil.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/