- Beranda
- Motor
- KAWASAKI 126 - 250cc
- ESTRELLA
- Sparepart Motor
- Sparepart Stang & Kemudi
- Sistem Kendali
- Stabilizer Stang
- NHK
- NHK: Satu Set Stabilizer Stang
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Ukuran:
•Stroke: 85mm
•Panjang body: 155mm
•Panjang keseluruhan: 270mm
•Seri ODM-500 Size:•Stroke: 85mm
•Body length: 155mm
•Overall length: 270mm
•ODM-500 series
•Stroke: 85mm
•Panjang body: 155mm
•Panjang keseluruhan: 270mm
•Seri ODM-500 Size:•Stroke: 85mm
•Body length: 155mm
•Overall length: 270mm
•ODM-500 series
[Deskripsi]
•Damper load dapat diatur dalam 7 langkah
•Busa karet 8 mm di bagian dan ujung pemasangan
•Finishing permukaan adalah cat hitam •Damper load can be adjusted in 7 steps
•8mm rubber bush at the mounting part and tip
•Surface treatment is black paint
•Busa karet 8 mm di bagian dan ujung pemasangan
•Finishing permukaan adalah cat hitam •Damper load can be adjusted in 7 steps
•8mm rubber bush at the mounting part and tip
•Surface treatment is black paint
Catatan
Klik di sini untuk Steering Damper Single Item
Steering damper alone is here.
Peringatan
*Gambar adalah steering damper tunggal.
*Jangan mengganti fungsi handle stopper.
*Harap pasang agar ada margin pada damper stroke saat mengenai handle stopper.
*Jika torsi yang melebihi torsi yang ditentukan diterapkan ke sekrup penjepit yang dipasang ke bodi damper, bodi akan terdistorsi dan gerakannya akan menjadi sangat astringen. Manajemen torsi yang akurat diperlukan saat memasang.
Harap dicatat, bahkan jika gejala seperti itu terjadi, kami tidak dapat menerima pengembalian atau penukaran. *The image shows the steering damper only.
*Do not substitute the function of the handlebar stopper.
*Install the damper in a way that there is enough room for the damper stroke when it hits the handlebar stopper.
* If the clamp screw attached to the damper body is torqued more than the specified torque, the body may be distorted and the movement may become extremely sluggish.Accurate torque control is required for installation.
If you experience any of these symptoms, it is not acceptable for returning or exchanging the product.
*Jangan mengganti fungsi handle stopper.
*Harap pasang agar ada margin pada damper stroke saat mengenai handle stopper.
*Jika torsi yang melebihi torsi yang ditentukan diterapkan ke sekrup penjepit yang dipasang ke bodi damper, bodi akan terdistorsi dan gerakannya akan menjadi sangat astringen. Manajemen torsi yang akurat diperlukan saat memasang.
Harap dicatat, bahkan jika gejala seperti itu terjadi, kami tidak dapat menerima pengembalian atau penukaran. *The image shows the steering damper only.
*Do not substitute the function of the handlebar stopper.
*Install the damper in a way that there is enough room for the damper stroke when it hits the handlebar stopper.
* If the clamp screw attached to the damper body is torqued more than the specified torque, the body may be distorted and the movement may become extremely sluggish.Accurate torque control is required for installation.
If you experience any of these symptoms, it is not acceptable for returning or exchanging the product.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/